BS EN 62453-1-2017 Field Device Tool (FDT) interface specification Overview and guidance《现场设备工具(FDT)界面规范 概述和指南》.pdf

《BS EN 62453-1-2017 Field Device Tool (FDT) interface specification Overview and guidance《现场设备工具(FDT)界面规范 概述和指南》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62453-1-2017 Field Device Tool (FDT) interface specification Overview and guidance《现场设备工具(FDT)界面规范 概述和指南》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、Field Device Tool (FDT) Interface SpecificationBS EN 62453-1:2017Part 1: Overview and guidance (IEC 62453-1:2016) BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62453-1:2017. It is identical to IE

2、C 62453-1:2016. It supersedes BS EN 62453-1:2009 which is withdrawn.The UK participation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained

3、 onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 85066 0ICS 25.040.40; 35.100.05; 35.110C

4、ompliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 April 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62453-1:2017E

5、UROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62453-1 March 2017 ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-1:2009 English Version Field Device Tool (FDT) interface specification - Part 1: Overview and guidance (IEC 62453-1:2016) Spcification des interfaces des outils des dispositifs

6、 de terrain (FDT) - Partie 1: Vue densemble et guide (IEC 62453-1:2016) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 1: berblick und Leitfaden - Teil 1: berblick und Leitfaden (IEC 62453-1:2016) This European Standard was approved by CENELEC on 2017-01-20. CENELEC members are bound to

7、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CEN

8、ELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centr

9、e has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy

10、, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komit

11、ee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62453-1:2017 E BS EN 62453-1:2017EN 62453-1:2017 2 European foreword The text of d

12、ocument 65E/333/CDV, future edition 2 of IEC 62453-1, prepared by SC 65E “Devices and integration in enterprise systems” of IEC/TC 65 “Industrial process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62453-1:2017. The following date

13、s are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-10-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-01-20 This document sup

14、ersedes EN 62453-1:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC

15、 62453-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61131 (Series) NOTE Harmonized as EN 61131 (Series) IEC 61131-3 NOTE Harmonized as EN 61131-3 IEC 61

16、158-1 NOTE Harmonized as EN 61158-1 IEC 61375-3-3 NOTE Harmonized as EN 61375-3-3 IEC 61499 (Series) NOTE Harmonized as EN 61499 (Series) IEC 61499-1 NOTE Harmonized as EN 61499-1 IEC 61784-1 NOTE Harmonized as EN 61784-1 IEC 61784-2 NOTE Harmonized as EN 61784-2 IEC 61784 (Series) NOTE Harmonized a

17、s EN 61784 (Series) IEC 61800-7-1 NOTE Harmonized as EN 61800-7-1 IEC 61800-7-2 (Series) NOTE Harmonized as EN 61800-7-2 (Series) IEC 61800-7-3 (Series) NOTE Harmonized as EN 61800-7-3 (Series) IEC 61804-2 NOTE Harmonized as EN 61804-2 BS EN 62453-1:2017EN 62453-1:2017 3 IEC 61804-3 NOTE Harmonized

18、as EN 61804-3 IEC 61804-4 NOTE Harmonized as EN 61804-4 IEC 61850 (Series) NOTE Harmonized as EN 61850 (Series) IEC 61915-1 NOTE Harmonized as EN 61915-1 IEC/TS 61970-2 NOTE Harmonized as CLC/TS 61970-2 IEC 62026 (Series) NOTE Harmonized as EN 62026 (Series) IEC 62026-1 NOTE Harmonized as EN 62026-1

19、 IEC 62264 (Series) NOTE Harmonized as EN 62264 (Series) IEC 62402 NOTE Harmonized as EN 62402 IEC 62453 (Series) NOTE Harmonized as EN 62453 (Series) IEC 62541 (Series) NOTE Harmonized as EN 62541 (Series) IEC/TR 62541-1 NOTE Harmonized as CLC/TR 62541-1 IEC 62769 (Series) NOTE Harmonized as EN 627

20、69 (Series) BS EN 62453-1:2017EN 62453-1:2017 4 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application.

21、For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 U

22、p-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61158 series Industrial communication networks - Fieldbus specifications EN 61158 series IEC 61784 series Industrial communication netw

23、orks - Profiles EN 61784 series BS EN 62453-1:2017 2 IEC 62453-1:2016 IEC 2016 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms, definitions, symbols, abbreviations and conventions 8 3.1 Terms and definitions 8 3.2 Abbreviations 13 3.3 Conventions 14 4 FDT overview 1

24、4 4.1 State of the art 14 4.2 Objectives of FDT . 15 4.2.1 General features 15 4.2.2 Device and module manufacturer benefits . 15 4.2.3 System manufacturer and integrator benefits . 16 4.2.4 Other applications . 16 4.3 FDT model 16 4.3.1 General . 16 4.3.2 Frame Applications 18 4.3.3 Device Type Man

25、ager 19 4.3.4 Communication Channel concept . 20 4.3.5 Presentation object 22 5 Structure of the IEC 62453 series 22 5.1 Structure overview 22 5.2 Part 2 Concepts and detailed description . 24 5.3 Parts 3xy Communication profile integration 24 5.3.1 General . 24 5.3.2 Communication profile integrati

26、on IEC 61784 CPF 1 . 25 5.3.3 Communication profile integration IEC 61784 CPF 2 . 25 5.3.4 Communication profile integration IEC 61784 CP 3/1 and 3/2 . 25 5.3.5 Communication profile integration IEC 61784 CP 3/4, CP 3/5 and 3/6 . 25 5.3.6 Communication profile integration IEC 61784 CPF 6 . 25 5.3.7

27、Communication profile integration IEC 61784 CPF 9 . 25 5.3.8 Communication profile integration IEC 61784 CPF 15 . 25 5.4 Parts 4z Object model integration profiles 26 5.4.1 General . 26 5.4.2 Object model integration profile Common object model (COM) . 26 5.4.3 Object model integration profile Commo

28、n language infrastructure (CLI) 26 5.5 Parts 51-xy/52-xy Communication profile implementation . 26 5.5.1 General . 26 5.5.2 Communication profile implementation IEC 61784 CPF 1 26 5.5.3 Communication profile implementation IEC 61784 CPF 2 26 5.5.4 Communication profile implementation IEC 61784 CP 3/

29、1 and 3/2 27 5.5.5 Communication profile implementation IEC 61784 CP 3/4, CP 3/5 and 3/6 . 27 BS EN 62453-1:2017IEC 62453-1:2016 IEC 2016 3 5.5.6 Communication profile implementation IEC 61784 CPF 6 27 5.5.7 Communication profile implementation IEC 61784 CPF 9 27 5.5.8 Communication profile implemen

30、tation IEC 61784 CPF 15 27 5.6 Parts 6z DTM styleguides 27 5.6.1 General . 27 5.6.2 Device Type Manager (DTM) styleguide for common object model 27 5.6.3 Field Device Tool (FDT) styleguide for common language infrastructure 27 6 Relation of the IEC 62453 series to other standardization activities .

31、27 7 Migration to DTM . 31 8 How to read IEC 62453 32 8.1 Architecture 32 8.2 Dynamic behavior . 32 8.3 Structured data types 33 8.4 Fieldbus communication 33 Annex A (informative) UML notation . 34 A.1 General . 34 A.2 Class diagram . 34 A.3 Statechart diagram 36 A.4 Use case diagram . 37 A.5 Seque

32、nce diagram 38 Annex B (informative) Implementation policy 39 Bibliography 40 Figure 1 Different tools and fieldbuses result in limited integration . 15 Figure 2 Full integration of all devices and modules into a homogeneous system . 16 Figure 3 General architecture and components 17 Figure 4 FDT so

33、ftware architecture 19 Figure 5 General FDT client/server relationship . 20 Figure 6 Typical FDT channel architecture . 21 Figure 7 Channel/parameter relationship 22 Figure 8 Structure of the IEC 62453 series 23 Figure 9 Standards related to IEC 62453 in an automation hierarchy . 28 Figure 10 Standa

34、rds related to IEC 62453 Grouped by purpose 31 Figure 11 DTM implementations . 32 Figure A.1 Note 34 Figure A.2 Class 34 Figure A.3 Association . 34 Figure A.4 Composition 35 Figure A.5 Aggregation 35 Figure A.6 Dependency 35 Figure A.7 Abstract class, generalization and interface 35 Figure A.8 Mult

35、iplicity 36 Figure A.9 Elements of UML statechart diagrams . 36 BS EN 62453-1:2017 4 IEC 62453-1:2016 IEC 2016 Figure A.10 Example of UML state chart diagram. 37 Figure A.11 UML use case syntax 37 Figure A.12 UML sequence diagram 38 Table 1 Overview of related standards . 29 BS EN 62453-1:2017IEC 62

36、453-1:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 1: Overview and guidance FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical com

37、mittees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technic

38、al Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmenta

39、l and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agre

40、ements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use

41、and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promot

42、e international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicat

43、ed in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) A

44、ll users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage

45、or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publica

46、tion. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such

47、 patent rights. International Standard IEC 62453-1 has been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. This second edition cancels and replaces the first edition published in 2009

48、. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: introduction of a new implementation technology (defined in IEC 62453-42). BS EN 62453-1:2017 6 IEC 62453-1:2016 IEC 2016 The text of this standard

49、 is based on the following documents: CDV Report on voting 65E/333/CDV 65E/393A/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62453 series, under the general title Field Device Tool (FDT) interface specification, can be found on the IEC w