BS EN 62149-1-2012 Fibre optic active components and devices Performance standards General and guidance《光纤有源元件和设备 性能标准 总则和导则》.pdf

《BS EN 62149-1-2012 Fibre optic active components and devices Performance standards General and guidance《光纤有源元件和设备 性能标准 总则和导则》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62149-1-2012 Fibre optic active components and devices Performance standards General and guidance《光纤有源元件和设备 性能标准 总则和导则》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic active componentsand devices Performance standardsPart 1: General and guidanceBS EN 62149-1:2012Copyright European Committee for Electrotechnical Standardization Prov

2、ided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62149-1:2012. It isidentical to IEC 62149-1:2011. It supersedes BS EN 62149-1:2004 which iswithdrawn.The UK p

3、articipation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems andactive devices.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all

4、the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 75987 1ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Stand

5、ard was published under the authority of the StandardsPolicy and Strategy Committee on 31 May 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62149-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENE

6、LECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62149-1 NORME EUROPENNE EUROPISCHE NORM February 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elek

7、trotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62149-1:2012 E ICS 33.180.01 Supersedes EN 62149-1:2004English version Fibre optic active components

8、 and devices - Performance standards - Part 1: General and guidance (IEC 62149-1:2011) Composants et dispositifs actifs fibres optiques - Normes de performances - Partie 1: Gnralits et lignes directrices (CEI 62149-1:2011) Aktive Lichtwellenleiterbauelemente und -gerte - Betriebsverhaltensnormen - T

9、eil 1: Allgemeines und Leitfaden (IEC 62149-1:2011) This European Standard was approved by CENELEC on 2012-01-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without a

10、ny alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other l

11、anguage made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,

12、the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62149-1:2012Copyrig

13、ht European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62149-1:2012 - 2 - Foreword The text of document 86C/1016/CDV, future edition 2 of IEC 62149-1, prepared by SC 86

14、C “Fibre optic systems and active devices“, of IEC/TC 86, “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62149-1:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical

15、national standard or by endorsement (dop) 2012-10-11 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-01-11 This document supersedes EN 62149-1:2004. EN 62149-1:2012 includes the following significant technical changes with respect to EN 62149

16、-1:2004: The technical change consists of an update in Table A.1. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice T

17、he text of the International Standard IEC 62149-1:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300 series NOTE Harmonized in EN 61300 series (not modifi

18、ed). IEC 61751 IEC 62005 series NOTE Harmonized as EN 61751. NOTE Harmonized in EN 62005 series (not modified). BS EN 62149-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without

19、license from IHS-,-,- 3 - EN 62149-1:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For da

20、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year

21、 Title EN/HD Year IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 - IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 6

22、1300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-5 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests

23、- Torsion EN 61300-2-5 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P

24、art 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive compo

25、nents - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-21 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test EN 61300-2-2

26、1 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - BS EN 62149-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CE

27、NELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62149-1:2012 - 4 - Publication Year Title EN/HD Year IEC 61300-2-26 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist EN 61300-

28、2-26 - IEC 61300-2-27 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow EN 61300-2-27 - IEC 61300-2-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Pa

29、rt 2-28: Tests - Industrial atmosphere (sulphur dioxide) EN 61300-2-28 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecti

30、ng devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-2-45 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-45: Tests -

31、Durability test by water immersion EN 61300-2-45 - IEC 61300-2-46 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic EN 61300-2-46 - IEC 61300-2-48 - Fibre optic interconnecting devices and passive components - B

32、asic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling EN 61300-2-48 - BS EN 62149-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license f

33、rom IHS-,-,- 2 62149-1 IEC:2011 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Preparation of a performance standard . 7 4.1 General . 7 4.2 Product definition 7 4.3 Tests . 7 4.4 Details . 8 4.5 Requirements 8 4.6 Sample size 8 4.7 Groupings/sequences

34、 8 4.8 Pass/fail criteria 8 4.9 Reference product definition 8 4.10 Performance standard test report 8 4.11 Environmental aspects 9 Annex A (normative) Tests and severities for performance standards 10 Bibliography 14 Table A.1 General operating service environments and definitions . 10 Table A.2 Ca

35、tegory C Controlled environment . 11 Table A.3 Category U Uncontrolled environment . 11 Table A.4 Category O Outside plant environment 12 Table A.5 Category E Extreme environment 13 BS EN 62149-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with

36、 CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62149-1 IEC:2011 5 INTRODUCTION Performance standards define standard electro-optical performance under a set of prescribed conditions and contain a series or a set of tests and measurements (which may or may

37、not be grouped into a specific schedule) with clearly defined conditions, severities and pass/fail criteria. The tests are intended to be run on as an initial design verification to prove the products ability to satisfy the requirements of a specific application, market sector or user group. The sub

38、sequent parts of this document contain those sets of performance criteria that have been standardised for international use. A product that has been shown to meet all the requirements of a performance standard may be declared as complying with that performance standard. Products from one manufacture

39、r that are tested to a performance standard will operate together within the bounds of the criteria set by the performance standard. There is however no guarantee that products from different suppliers having the same standard interface, which have been independently tested to a performance standard

40、, will meet the same levels of optical performance when mated together as those supplied by one manufacturer. Compliance with a performance standard demonstrates that a product has in essence passed a design verification test, it is not a guarantee of lifetime assured performance nor reliability. Bo

41、th service life tests and reliability testing must be the subject of a separate test schedule where the tests and severities selected are such that they are truly representative of the requirements of these test programmes. Consistency of manufacture should be maintained using a recognised quality a

42、ssurance programme while the reliability of the product should be evaluated using the procedures recommended in IEC 62005 and IEC 61751. Where possible, tests and measurements should be selected from IEC 61300. Where this is not possible, the required test method shall be attached as an annex to the

43、 performance standard. BS EN 62149-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6 62149-1 IEC:2011 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFOR

44、MANCE STANDARDS Part 1: General and guidance 1 Scope This part of IEC 62149 provides references, definitions and rules for creating active fibre optic device performance standards, as well as related information pertinent to the subject. Subsequent parts of IEC 62149 are sequentially numbered and co

45、ntain performance criteria for specific applications. Each part will be added as the performance criteria become standardised for international use. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicat

46、ion. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-27, Environmental testing Part 2-27: Tests Test Ea and guidance: Shock IEC 61300-2-1, Fibre optic interconnecting devices a

47、nd passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-5, Fibre optic interconnecting devices

48、and passive components Basic test and measurement procedures Part 2-5: Tests Torsion IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibr