BS EN 61069-8-2016 Industrial-process measurement control and automation Evaluation of system properties for the purpose of system assessment Assessment of other system properties《.pdf

《BS EN 61069-8-2016 Industrial-process measurement control and automation Evaluation of system properties for the purpose of system assessment Assessment of other system properties《.pdf》由会员分享，可在线阅读，更多相关《BS EN 61069-8-2016 Industrial-process measurement control and automation Evaluation of system properties for the purpose of system assessment Assessment of other system properties《.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、Industrial-process measurement, control andautomation Evaluation of system properties for the purpose of system assessmentPart 8: Assessment of other system propertiesBS EN 61069-8:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Stan

2、dard is the UK implementation of EN 61069-8:2016. It isidentical to IEC 61069-8:2016. It supersedes BS EN 61069-8:1999 which iswithdrawn.The UK participation in its preparation was entrusted by Technical Com-mittee GEL/65, Measurement and control, to Subcommittee GEL/65/1,System considerations.A lis

3、t of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Lim

4、ited 2016ISBN 978 0 580 85998 4ICS 25.040.40 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2016. Amendments/corrigenda issued since publicationDate Te

5、xt affectedBRITISH STANDARDBS EN 61069-8:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61069-8 September 2016 ICS 25.040.40 Supersedes EN 61069-8:1999 English Version Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessm

6、ent - Part 8: Assessment of other system properties (IEC 61069-8:2016) Mesure, commande et automation dans les processus industriels - Apprciation des proprits dun sytme en vue de son valuation - Partie 8: Evaluation des autres proprits dun systme (IEC 61069-8:2016) Leittechnik fr industrielle Proze

7、sse - Ermittlung der Systemeigenschaften zum Zweck der Eignungsbeurteilung eines Systems - Teil 8: Auswertung anderer Systemeigenschaften (IEC 61069-8:2016) This European Standard was approved by CENELEC on 2016-07-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations whi

8、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. Thi

9、s European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENE

10、LEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherla

11、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centr

12、e: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61069-8:2016 E BS EN 61069-8:2016EN 61069-8:2016 2 European foreword The text of document 65A/796/FDIS, future edition 2 of IEC 61069-8, prepa

13、red by SC 65A “System aspects“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61069-8:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by

14、 publication of an identical national standard or by endorsement (dop) 2017-04-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-07-20 This document supersedes EN 61069-8:1999. Attention is drawn to the possibility that some of the elements

15、of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61069-8:2016 was approved by CENELEC as a European Standard without any modification. In

16、 the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60300-2 NOTE Harmonized as EN 60300-2. IEC 61069-3:2016 NOTE Harmonized as EN 61069-3:201X 1)(not modified). IEC 61069-4:2016 NOTE Harmonized as EN 61069-4:201X 1)(not modified). IEC 61069-

17、5:2016 NOTE Harmonized as EN 61069-5:2016 (not modified). IEC 61069-6:2016 NOTE Harmonized as EN 61069-6:2016 (not modified). IEC 61069-7:2016 NOTE Harmonized as EN 61069-7:2016 (not modified). 1) To be published. BS EN 61069-8:2016EN 61069-8:2016 3 IEC 61082-1 NOTE Harmonized as EN 61082-1. IEC 610

18、82-2 2)NOTE Harmonized as EN 61082-2. IEC 61082-3 2)NOTE Harmonized as EN 61082-3. IEC 61082-4 2)NOTE Harmonized as EN 61082-4. IEC 61187 NOTE Harmonized as EN 61187. IEC 61346-1 3)NOTE Harmonized as EN 61346-1. IEC 61346-2 3)NOTE Harmonized as EN 61346-2. IEC 61355 NOTE Harmonized in EN 61355 serie

19、s. IEC 61508 NOTE Harmonized in EN 61508 series. IEC/TS 62603-1 NOTE Harmonized as CLC/TS 62603-1. ISO 19011 NOTE Harmonized as EN ISO 19011. ISO 9000 NOTE Harmonized as EN ISO 9000. ISO 9001 NOTE Harmonized as EN ISO 9001. 2) Superseded by IEC 61082-1:2006, Preparation of documents used in electrot

20、echnology - Part 1: Rules, harmonized as EN 61082-1:2006. 3) Superseded by IEC 81346-1:2009, Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations Part 1: Basic rules, harmonized as EN 81346-1:2009. BS EN 61069-8:2016EN 61069-8:20

21、16 4 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cite

22、d applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest version

23、s of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61069-1 2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concept

24、s EN 61069-1 201X 4)IEC 61069-2 2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology EN 61069-2 201X 4)4) To be published. BS EN 61069-8:2016 2 IEC 61069-8:2016 IEC 2016 CONTENTS FOREWORD .

25、 5 INTRODUCTION . 7 1 Scope 9 2 Normative references. 9 3 Terms, definitions, abbreviated terms, acronyms, conventions and symbols 9 3.1 Terms and definitions 9 3.2 Abbreviated terms, acronyms, conventions and symbols 9 4 Basis of assessment specific to other system properties . 9 4.1 Other system p

26、roperties 9 4.1.1 General . 9 4.1.2 Quality assurance 10 4.1.3 System support 11 4.1.4 Compatibility 13 4.1.5 Physical properties . 13 4.2 Factors influencing OSP 13 5 Assessment method 14 5.1 General . 14 5.2 Defining the objective of the assessment . 14 5.3 Design and layout of the assessment . 14

27、 5.4 Planning the assessment program . 14 5.5 Execution of the assessment . 14 5.6 Reporting of the assessment . 14 6 Evaluation techniques 15 6.1 General . 15 6.2 Analytical evaluation techniques 15 6.2.1 Evaluation of quality assurance 15 6.2.2 Evaluation of systems support 15 6.2.3 Evaluation of

28、compatibility 15 6.2.4 Evaluation of physical properties 16 6.3 Empirical evaluation techniques. 16 6.3.1 Evaluation of systems support 16 6.3.2 Evaluation of compatibility 16 6.4 Additional topics for evaluation techniques 16 Annex A (informative) Checklist and/or example of SRD for system function

29、ality . 17 A.1 SRD information 17 A.2 System support . 17 A.3 Quality assurance . 17 Annex B (informative) Check list and/or example of SSD for system functionality 18 B.1 SSD information 18 B.2 Check points for other aspects 18 Annex C (informative) Assessment of non-task-related system properties,

30、 sample system specification information from IEC TS 62603-1 . 19 C.1 Overview. 19 C.2 Non-task-related system properties . 19 C.2.1 Technical and commercial support 19 BS EN 61069-8:2016IEC 61069-8:2016 IEC 2016 3 C.2.2 Training of the personnel 19 C.2.3 Technical support for operation 19 C.2.4 War

31、ranty 20 C.2.5 References of the vendor . 20 C.3 System support . 21 C.3.1 Automatic documentation . 21 C.3.2 On-line documentation . 21 Annex D (informative) Subjects to be considered on type of training required for the mission . 22 D.1 General . 22 D.2 Enabling factors 22 D.2.1 General . 22 D.2.2

32、 Knowledge . 22 D.2.3 Attitude 23 D.3 Skills . 23 D.3.1 General . 23 D.3.2 Technical skills 23 D.3.3 Skill to make decisions . 24 D.3.4 Skill to communicate effectively 24 D.4 Overview of training items . 24 Annex E (informative) Evaluation indicators to assess quality assurance . 27 E.1 Company 27

33、E.2 Technologies 28 E.3 Processes . 29 E.4 Products . 30 E.5 Deliveries 31 Annex F (informative) Evaluation matrix to assess compatibility 33 Bibliography . 34 Figure 1 General layout of IEC 61069 . 8 Figure 2 Other system properties . 10 Table D.1 Training items 24 Table E.1 Company profile . 27 Ta

34、ble E.2 Management 27 Table E.3 Quality management system (QM) 27 Table E.4 Co-operation and service (overall assessment) . 28 Table E.5 Product strategy . 28 Table E.6 Production . 28 Table E.7 Development 28 Table E.8 Co-operation 29 Table E.9 Process documentation 29 Table E.10 Process control 29

35、 Table E.11 Environmental compatibility 29 Table E.12 Co-operation 30 Table E.13 Delivery quality . 30 BS EN 61069-8:2016 4 IEC 61069-8:2016 IEC 2016 Table E.14 Reliability . 30 Table E.15 Processing of complaints 30 Table E.16 Co-operation 31 Table E.17 Delivery logistics 31 Table E.18 Transport sy

36、stems 31 Table E.19 Cost management 32 Table E.20 Co-operation 32 Table F.1 Evaluation matrix to assess compatibility 33 BS EN 61069-8:2016IEC 61069-8:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION EVALUATION OF SYSTEM PROPERTIES FO

37、R THE PURPOSE OF SYSTEM ASSESSMENT Part 8: Assessment of other system properties FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to prom

38、ote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides

39、(hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also

40、 participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possib

41、le, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. Whil

42、e all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake t

43、o apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestatio

44、n of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of thi

45、s publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or ind

46、irect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for t

47、he correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61069-8 has been pre

48、pared by subcommittee 65A: System aspects, of IEC technical committee 65: Industrial-process measurement, control and automation. This second edition cancels and replaces the first edition published in 1999. This edition constitutes a technical revision. This edition includes the following significa

49、nt technical changes with respect to the previous edition: a) reorganization of the material of IEC 61069-8:1999 to make the overall set of standards more organized and consistent; b) IEC TS 62603-1 has been incorporated into this edition. BS EN 61069-8:2016 6 IEC 61069-8:2016 IEC 2016 The text of this standard is based on the following documents: FDIS Report on voting 65A/796/FDIS 65A/806/RVD Full information on the voting for the approval of this standard ca