BS EN 60730-1-1992 Specification for automatic electrical controls for household and similar use - General requirements《家用和类似用途的自动电控制器的规范 通用要求》.pdf

《BS EN 60730-1-1992 Specification for automatic electrical controls for household and similar use - General requirements《家用和类似用途的自动电控制器的规范 通用要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60730-1-1992 Specification for automatic electrical controls for household and similar use - General requirements《家用和类似用途的自动电控制器的规范 通用要求》.pdf（172页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60730-1:1992 Incorporating Amendment Nos.1, 2 and 3 Specification for Automatic electrical controls for household and similar use Part 1: General requirements The European Standard EN60730-1:1991has the status of a British Standard UDC 681.521.7:697.1/.7:628.8:64.06-83BSEN6073

2、0-1:1992 This British Standard, having been prepared under the directionof the Light Electrical Engineering Standards Policy Committee, was published underthe authority of the Standards Board and comes intoeffect on 15September1992 BSI06-1999 The following BSI references relate to the work on this s

3、tandard: Committee reference LEL/96 Draft for comment84/27778 DC ISBN 0 580 21006 5 Cooperating organizations The European Committee for Electrotechnical Standardization (CENELEC), under whose supervision this European Standard was prepared, comprises the national committees of the following countri

4、es: Austria Italy Belgium Luxembourg Denmark Netherlands Finland Norway France Portugal Germany Spain Greece Sweden Iceland Switzerland Ireland United Kingdom Amendments issued since publication Amd. No. Date Comments 7747 May 1993 8148 May 1994 8883 December 1995 Indicated by a sideline in the marg

5、inBSEN60730-1:1992 BSI 06-1999 i Contents Page Cooperating organizations Inside front cover National foreword ii Foreword 2 Text of EN60730-1 7 National appendix NA (informative) Deletions from and IECtextamendedbycommon modifications to IEC Publication730-1(1986)firstedition,amendment1(1990) andame

6、ndment2(1991) 123 National appendix NB (informative) 165 National appendix NC (informative) 165BSEN60730-1:1992 ii BSI 06-1999 National foreword This British Standard has been prepared under the direction of the Light Electrical Engineering Standards Policy Committee and is the English language vers

7、ion of EN60730-1, “Automatic electrical controls for household and similar use Part1: General requirements”, published by the European Committee for Electrotechnical Standardization (CENELEC). It was derived by that organization from IEC Publication730-1(1986) first edition, which has the same title

8、 as the European Standard. The CENELEC common modifications have been implemented at the appropriate places in the text of IEC Publication730-1(1986) first edition as amended by Amendment No.1(1990) and Amendment No.2(1991) and are indicated by a sidline in the margin. The foreword and preface of IE

9、C Publication730-1(1986) first edition as amended by Amendment No.1(1990) and Amendment No.2(1991) and the deleted parts of the original IEC text which do not form part of the text of EN60730-1have been quoted in National appendix NA. Annexes designated “normative” are part of the body of the standa

10、rd. Annexes designated “informative” are given for information only. National appendices are designated “informative”. References to page numbers in the text are to page numbers in IEC730-1(1986) and should be ignored for the purposes of this British Standard. This British Standard incorporates amen

11、dments EN60730-1/A1(1991), EN60730-1/A11(1991), EN60730-1/A12(1993) and EN60730-1/A14(1995). Particular requirements for specific controls will be specified in subsequent Partsof BSEN60730. Such controls have been specified in BS3955 “Specification for electrical controls for household and similar g

12、eneral purposes”. As the subsequent Parts of BSEN60730 are published, BS3955 will be progressively amended to delete specific controls at the dates of withdrawal agreed. Amend the text of European Standard EN60730-1 as follows. In 4.1.5, line 2 delete “and 17.13”. In 17.8.4, in the last line, delete

13、 “17.8.4” and substitute “7.2”. Cross-references. The relationship between other international publications quoted in this standard and British Standards which are either identical or technically equivalent is given in national National appendix NC. Product approval. Attention is drawn to the fact t

14、hat products conforming to this British Standard may be approved by the British Electrotechnical Approvals Board for the purposes of participation in the CENELEC Certification Agreement and in the CB Scheme of the IECEE. (Details of the BEAB Approval Scheme are given on the inside back cover.) A Bri

15、tish Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a fro

16、nt cover, an inside front cover, pagesi andii, theEN title page, pages2 to166, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDAR

17、D NORME EUROPENNE EUROPISCHE NORM EN60730-1 May 1991 +A1 + A11 May 1991May 1991 +A12 + A14 January 1993June 1995 UDC 681.521.7:697.1/.7:628.8:64.06-83 Descriptors: Control, definition, requirement, classification, construction, test English version Automatic electrical controls for household and sim

18、ilar use Part 1: General requirements (Includes Amendment A1:1991 + Amendment A11:1991 + A12:1993 + A14:1995) (IEC 730-1:1986, modified) Dispositifs de commande lectrique automatiques usage domestique et analogue Premire partie: Rgles gnrales (CEI 730-1:1986, modifie) (Inclut les amendement A1:1991

19、+ A11:1991 +A12:1993 + A14:1995) Automatische elektrische Regel- und Steuergerte fr den Hausgebrauch und hnliche Anwendungen Teil1:AllgemeineAnforderungen (IEC 730-1:1986, modifiziert) (Einschlielich nderung A1:1991 + A11:1991 + A12:1993 + A14:1995) This European Standard was approved by CENELEC on1

20、1 September1990. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

21、 may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified

22、 to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and Un

23、itedKingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1991 Copyright reserved to CENELEC members Ref. No. EN 60730-1:1991 +

24、 A1:1991 + A11:1991 + A12:1993 + A14:1995 EEN60730-1:1991 BSI 06-1999 2 Foreword The CENELEC questionnaire procedure, performed for finding out whether or not the International Standard IEC730-1:1986 could be accepted without textual changes, has shown that some common modifications were necessary f

25、or the acceptance as European Standard. The reference document, together with the common modifications prepared by the CENELEC Technical Committee TC72: Automatic controls for household use, was submitted to the CENELEC members for formal vote. The text of the draft was approved by CENELEC on11 Sept

26、ember1990. The following dates were fixed: For products which have complied with the relevant national standard before1995-07-01 as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until1999-07-01. This document supplements or modifies

27、 the corresponding clauses of IEC730-1:1986, so as to convert it into the European Standard EN60730-1. In using this standard, reference must also be made to all appropriate amendments to this standard which contain additional common modifications. Subclauses which are in addition to those in the IE

28、C730-1 are numbered501,502etc. New annexes are numbered Annex ZA, Annex ZB etc. Special national conditions (snc) causing a deviation from this European Standard are listed in Annex ZA (normative) which forms part of this standard. Where reference is made to other international or harmonized standar

29、ds, the edition of that standard quoted in Annex ZB (normative) is applicable. This standard will be in two parts: Part1: General requirements, comprising clauses of a general character for automatic electrical controls for use in, on, or with household and similar electrical appliances. It applies

30、only when there is a Part2 for a particular type of control, or for controls for particular application. Part2: Particular requirements, dealing with particular types of controls or controls for particular application. The clauses of these particular requirements supplement or modify the correspondi

31、ng clauses of Part1. Where, for a particular clause or subclause, the text of Part2 indicates a: supplement the Part1 text applies with the additional requirement indicated in Part2; amendment the Part1 text applies with a minor change as indicated in Part2; replacement the Part2 text contains a cha

32、nge which replaces the Part1 text in its entirety; deletion the Part1 text does not apply. Where no change is necessary, the Part2 indicates that the relevant clause or subclause applies. NOTEIn this document, the following print types are used: requirements proper: in roman type; test specification

33、s: in italic type; explanatory matter: in smaller roman type. Foreword to amendment A1 The CENELEC questionnaire procedure, performed for finding out whether or not amendment No.1:1990 to the International Standard IEC730-1:1986 could be accepted without textual changes, has shown that some common m

34、odifications were necessary for the acceptance as amendment to the European Standard. The reference document, together with the common modifications prepared by the CENELEC Technical Committee TC72: Automatic controls for household use, was submitted to the CENELEC members for formal vote. The text

35、of the draft was approved by CENELEC as amendment A1 on 11September1990. The following dates were fixed: This document supplements or modifies the corresponding clauses of amendment No.1:1990 to IEC730-1:1986, so as to convert it into amendment A1 to EN60730-1. Subclauses which are in addition to th

36、ose in the IEC Standard730-1 are numbered501,502etc. New annexes are numbered Annex ZA, Annex ZB etc. latest date of publication ofan identical national standard (dop) 1992-07-01 latest date of withdrawal ofconflicting standards (dow) 1995-07-01 latest date of publication ofan identical national sta

37、ndard (dop) 1992-07-01 latest date of withdrawal ofconflicting standards (dow) 1995-07-01EN60730-1:1991 BSI 06-1999 3 Special national conditions (snc) causing a deviation from this amendment are listed in Annex ZA(normative) which forms part of this standard. Where reference is made to other intern

38、ational or harmonized standards, the edition of that standard quoted in Annex ZB (normative) is applicable. Foreword to amendment A11 The CENELEC questionnaire procedure, performed for finding out whether or not the IEC Central Office documents IEC72(CO)38, 72(CO)40, 72(CO)42, and72(CO)24 as amended

39、 by72(CO)35, could be accepted without textual changes, has shown that some common modifications were necessary for the acceptance as amendment to the European Standard. The reference documents, together with the common modifications prepared by the CENELEC Technical Committee TC72: Automatic contro

40、ls for household use, were submitted to the CENELEC members for formal vote as draft amendments prAA, prAB, prAC and prAD to EN60730-1. All four documents received sufficient positive votes for submission to the Technical Board for ratification. Amendment No.2 to IEC Publication730-1 will include th

41、e above referenced Central Office documents. However, because of delays in printing this amendment, it has been found necessary to issue the present amendment to EN60730-1 as amendment A11. When IEC Amendment No.2 becomes available, CENELEC/TC72 will discuss this amendment again with the object of r

42、e-issuing it as an endorsement of IEC Amendment No.2. The separate sections of this document will then be eliminated. The texts of the drafts were approved by CENELEC as amendment A11 on11 September1990. The following dates were fixed: This document supplements or modifies the corresponding clauses

43、of the IEC Central Office documents IEC72(CO)38,72(CO)40,72(CO)24as amended by72(CO)35, so as to convert them into amendment A11 to EN60730-1. Where reference is made to other international or harmonized standards, the edition of that standard quoted in Annex ZB (normative) is applicable. Foreword t

44、o amendment A12 This amendment A12 to EN60730-1:1991 has been prepared by the CENELEC Technical Committee TC72: Automatic controls for household use. It was agreed for submission to the CENELEC formal vote at the meeting of CLC/TC72 in Brussels on26 and27 November1991. At that meeting it was conside

45、red necessary to issue a correction to clause 6 of EN60730-1. At that same meeting, a proposal from the Danish Committee (CLC/TC72(DK)5) to delete note12 to Table 20.1 because this is a North American requirement which should not have appeared in theEN, was accepted. The text of the draft was approv

46、ed by CENELEC asamendment A12 to EN60730-1 on9December1992. The following dates are fixed: Foreword to amendment A14 At the request of the British Electrotechnical Committee, a draft for an amendment to EN60730-1:1991 was submitted to the CENELEC members for acceptance in January1995. The text of th

47、e draft was accepted by CENELEC as amendmentA14 to EN60730-1:1991 on1995-03-20. The following dates were fixed: latest date of publication ofan identical national standard (dop) 1992-07-01 latest date of withdrawal ofconflicting standards (dow) 1995-07-01 latest date of publication ofan identical na

48、tional standard (dop) 1994-01-01 latest date of withdrawal ofconflicting standards (dow) 1995-07-01 latest date by which the existence of the amendmenthas to beannounced at nationallevel (doa) 1995-06-20 latest date by which theamendment has to beimplemented at nationallevel by publicationof anident

49、icalnational standardor by endorsement (dop) 1995-09-20EN60730-1:1991 BSI 06-1999 4 Contents Page Foreword 1 Scope 7 2 Definitions 7 3 General requirement 21 4 General notes on tests 21 5 Rating 23 6 Classification 23 7 Information 28 8 Protection against electric shock 32 9 Provision for protective earthing 34 10 Terminals and terminations 36 11 Constructional requirements 41 12 Moisture resistance 50 13 Electric strength and insulation resistance 51 14 Heating 53 15 Manufacturing deviation and drift 57 16 Environmental st