BS EN 15643-4-2012 Sustainability of construction works Assessment of buildings Framework for the assessment of economic performance《建筑工程的持续性 建筑物评估 经济实绩评估用的框架》.pdf

《BS EN 15643-4-2012 Sustainability of construction works Assessment of buildings Framework for the assessment of economic performance《建筑工程的持续性 建筑物评估 经济实绩评估用的框架》.pdf》由会员分享，可在线阅读，更多相关《BS EN 15643-4-2012 Sustainability of construction works Assessment of buildings Framework for the assessment of economic performance《建筑工程的持续性 建筑物评估 经济实绩评估用的框架》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15643-4:2012Sustainability of construction works Assessment of buildingsPart 4: Framework for the assessment of economic performanceBS EN 15643-4:2012 BRITISH STANDARDNatio

2、nal forewordThis British Standard is the UK implementation of EN 15643-4:2012. The UK participation in its preparation was entrusted to T e c h n i c a l Committee B/558, Sustainability of construction works.A list of organizations represented on this committee can be obtained on request to its secr

3、etary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012 ISBN 978 0 580 63913 5 ICS 91.040.01 Compliance with a British Standard cannot confer immunity from legal obligatio

4、ns.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 February 2012.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 15643-4:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15643-4 January 2012 ICS 91.040.01 Engli

5、sh Version Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performanceContribution des ouvrages de construction au dveloppement durable - Evaluation des btiments - Partie 4: Cadre pour lvaluation de la performance conomiqueNachhaltigk

6、eit von Bauwerken - Bewertung der Nachhaltigkeit von Gebuden - Teil 4: Rahmenbedingungen fr die Bewertung der konomischen Qualitt This European Standard was approved by CEN on 29 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions f

7、or giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in thr

8、ee official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bo

9、dies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

10、United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15643-4:

11、2012: EBS EN 15643-4:2012EN 15643-4:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 72 Normative references 73 Terms and definitions .84 Principles . 174.1 General . 174.2 Objective of economic performance assessment of the building . 174.3 Approach to assessment of economic performance 17

12、4.4 Relevance of technical and functional requirements . 184.5 Consideration of building life cycle 185 Requirements for assessment methods 185.1 General . 185.2 Object of assessment and the system boundary 195.3 Functional equivalent Requirements for basis for comparability . 195.4 Type of data and

13、 their assignment to the building life cycle . 205.4.1 Assignment of data to the building life cycle 205.4.2 Economic aspects and impacts specific to the building 215.4.3 Scenarios . 235.5 Requirements for data quality in the assessment of economic performance . 235.6 Requirements for verification 2

14、35.7 Transparency of the assessment methods 235.8 Requirements for reporting and communication 235.8.1 General . 235.8.2 Results of the assessment 245.8.3 Functional equivalent . 255.8.4 Economic requirements from clients brief and/or regulations . 265.8.5 Declared technical and functional performan

15、ce . 266 Requirements for calculation methods for assessment of economic performance of buildings 266.1 Overview of the methodology for assessment of economic performance of buildings . 266.2 Economic indicators 266.3 Specific requirements for system boundary for assessment of economic performance o

16、f buildings 26Annex A (informative) Work programme of CEN/TC 350 . 27Annex B (informative) Economic aspects of building performance through the life cycle of the building 28Annex C (informative) Economic indicators 32Annex D (informative) Potential Economic indicators . 33Bibliography . 34BS EN 1564

17、3-4:2012EN 15643-4:2012 (E) 3 Foreword This document (EN 15643-4:2012) has been prepared by Technical Committee CEN/TC 350 “Sustainability of construction works”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication

18、 of an identical text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be

19、 held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Est

20、onia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15643-4:2012EN 15643-4:2012 (E) 4 Introduction This Eur

21、opean Standard forms part of a series of European Standards, written by CEN/TC 350, that provide a system for the sustainability assessment of buildings using a life cycle approach. The sustainability assessment quantifies aspects and impacts to assess the environmental, social and economic performa

22、nce of buildings using quantitative and qualitative indicators, both of which are measured without value judgments. The purpose of this series of standards is to enable comparability of the results of assessments. This series of European Standards does not set benchmarks or levels of performance. Th

23、is series of standards will allow the sustainability assessment, i.e. the assessment of environmental, social and economic performance of a building, to be made concurrently and on an equal footing, on the basis of the same technical characteristics and functionality of the object of assessment. The

24、 sustainability assessment of buildings uses different types of information. The results of a sustainability assessment of a building provide values for the different types of indicators, the related building scenarios, and on the lifecycle stages included in the assessment. In carrying out assessme

25、nts scenarios and a functional equivalent are determined at the building level Assessment at the building level means that the descriptive model of the building with the major technical and functional requirements has been defined in the clients brief or in the regulations, as illustrated in Figure

26、1 below. Assessments can be undertaken for the whole building, for parts of the building which can be used separately, or for elements of the building. Although the evaluation of technical and functional performance is beyond the scope of this series of standards, the technical and functional charac

27、teristics are considered within this framework by reference to the functional equivalent. The functional equivalent takes into account the technical and functional requirements and forms the basis for comparisons of the results of the assessment. Any particular demands for, or related to, the enviro

28、nmental, social and economic performance defined in the clients brief, or in regulations, may be declared and communicated. Figure 1 below shows how the functional equivalent, and the technical and functional characteristics that differ from those required, either by the clients brief or through reg

29、ulations, are to be declared and communicated with the results of the assessment. BS EN 15643-4:2012EN 15643-4:2012 (E) 5 NOTE The outer box with the dotted line represents the area to be standardised by CEN/TC 350. Figure 1 Concept of sustainability assessment of buildings In concept, the integrate

30、d building performance incorporates environmental, social and economic performance as well the technical and functional performance, and these are intrinsically related to each other, as illustrated in Figure 2 below. Although the assessment of technical and functional performance does not form part

31、 of this series of standards, their interrelationship with environmental, social and economic performance is a prerequisite for an assessment of sustainability performance of buildings and, therefore, is taken into account. It is advisable to carry out an assessment at the earliest opportunity durin

32、g the conceptual stages of a construction or refurbishment project such as in the sketch plan stage in order to provide a broad estimate of the environmental performance, social performance and economic performance. As the project evolves, the assessment may be periodically reviewed and updated to s

33、upport decision-making. A final assessment (as built) should be carried out. The results of this final assessment can be used to inform all parties concerned. BS EN 15643-4:2012EN 15643-4:2012 (E) 6 NOTE The darkened boxes represent the current work programme of CEN/TC 350. Figure 2 Work programme o

34、f CEN/TC 350 This framework is Part 4 of the framework standards for sustainability assessment of buildings. The purpose of this EN 15643-4 is to provide a framework with principles, requirements and guidelines for the assessment of the economic performance of a building, as described at the “framew

35、ork level“ in above Figure 2. The first revision of the general framework standard, EN 15643-1, is intended to combine all four parts of the standard into one framework standard. This will ensure simultaneous revision of the interlinked parts of the standard. In the future, the assessment methodolog

36、ies within this framework standard may be part of an overall assessment of integrated building performance. The assessment methodologies may also be extended to an assessment of the neighbourhoods and wider built environment. BS EN 15643-4:2012EN 15643-4:2012 (E) 7 1 Scope This European Standard for

37、ms one part of a series of European Standards for the assessment of buildings and provides specific principles and requirements for the assessment of economic performance of buildings taking into account technical characteristics and functionality of a building. Assessment of economical performance

38、is one aspect of sustainability assessment of buildings under the general framework of EN 15643-1. The framework applies to all types of buildings and it is relevant for the assessment of the economic performance of new buildings over their life cycle, and of existing buildings over their remaining

39、service life and end of life stage. The economic performance assessment of a building addresses the life cycle costs and other economic aspects, all expressed through quantitative indicators. It excludes the economic risk assessment of a building and return on investment calculations It includes eco

40、nomic aspects of a building relating to the built environment within the area of the building site, it does not include economic aspects beyond the area of the building site, e.g. such as economic impacts of construction of local infrastructure or economic impacts resulting from transportation of th

41、e users of the building or economic impacts of a construction project on local community. The standards developed under this framework do not set the rules for how the different assessment methodologies may provide valuation methods nor do they prescribe levels, classes or benchmarks for measuring p

42、erformance. NOTE Valuation methods, levels, classes or benchmarks may be prescribed in the requirements for economic performance in the clients brief, building regulations, national standards, national codes of practice, building assessment and certification schemes, etc. The rules for assessment of

43、 economic aspects of organizations, such as management systems, are not included within this framework. However, the consequences of decisions or actions that influence the economic performance of the object of assessment are taken into account. 2 Normative references The following referenced docume

44、nts are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 15392:2008, Sustainability in building construction General principles ISO 1

45、5686-1:2011, Buildings and constructed assets Service life planning Part 1: General principles and framework ISO 15686-7, Buildings and constructed assets Service life planning Part 7: Performance evaluation for feedback of service life data from practice ISO 15686-8:2008, Buildings and constructed

46、assets Service-life planning Part 8: Reference service life and service-life estimation ISO/TS 15686-9, Buildings and constructed assets Service-life planning Part 9: Guidance on assessment of service-life data BS EN 15643-4:2012EN 15643-4:2012 (E) 8 3 Terms and definitions For the purposes of this

47、document, the following terms and definitions apply. 3.1 assembled system part of works component (3.8) or a set of components incorporated in the construction works (3.11) NOTE Adapted from the definitions in the Construction Products Directive (CPD) Guidance Paper C and from the definition of cons

48、truction in ISO 6707-1. 3.2 brief written document that states the clients (3.7) requirements for a construction project ISO 6707-2:1993 3.3 building construction works (3.11) that has the provision of shelter for its occupants or contents as one of its main purposes and is usually enclosed and desi

49、gned to stand permanently in one place ISO 6707-1:2004 3.4 building fabric all construction products (3.9) that are fixed to the building (3.3) in a permanent manner, so that the dismantling of the product decreases the performance of the building and the dismantling or replacement of the product constitute construction operations 3.5 building site specified area of land where a building (3.3) is located o