BS EN 4135-2009 Aerospace series - Bolts normal bi-hexagonal head coarse tolerance normal shank medium length thread in titanium alloy anodized MoS2 lubricated - Classification 110.pdf

《BS EN 4135-2009 Aerospace series - Bolts normal bi-hexagonal head coarse tolerance normal shank medium length thread in titanium alloy anodized MoS2 lubricated - Classification 110.pdf》由会员分享，可在线阅读，更多相关《BS EN 4135-2009 Aerospace series - Bolts normal bi-hexagonal head coarse tolerance normal shank medium length thread in titanium alloy anodized MoS2 lubricated - Classification 110.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 4135:2009ICS 49.030.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated Classification: 1 100 MPa (at ambient

2、temperature) / 315 nullCLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 01:40, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 July 2009 BSI 2009ISBN 978 0 580 68583 5Amendments/corrigenda issued sin

3、ce publicationDate CommentsBS EN 4135:2009National forewordThis British Standard is the UK implementation of EN 4135:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committe

4、e can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE

5、 CHINA STANDARDS, 12/11/2009 01:40, Uncontrolled Copy, (c) BSIBS EN 4135:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4135 July 2009 ICS 49.030.20 English Version Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, a

6、nodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 C Srie arospatiale - Vis tte bihexagonale normale, tige normale tolrance large, filetage moyen, en alliage de titane, anodises, lubrifies MoS2 - Classification : 1 100 MPa ( temprature ambiante) / 315 C Luft- und Rau

7、mfahrt - Zwlfkantschrauben, mittlere Gewindelnge, aus Titanlegierung, anodisiert, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 C This European Standard was approved by CEN on 6 June 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

8、conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in

9、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies

10、 of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROP

11、EAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4135:2009: ELicensed Copy: Wa

12、ng Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 01:40, Uncontrolled Copy, (c) BSIBS EN 4135:2009EN 4135:2009 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Required characteristics .4 4 Designation 7 5 Marking .7 6 Technical specification .7 Licensed Copy: Wang Bin, ISO/EXCHANG

13、E CHINA STANDARDS, 12/11/2009 01:40, Uncontrolled Copy, (c) BSIBS EN 4135:2009EN 4135:2009 (E) 3 Foreword This document (EN 4135:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance wit

14、h the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an ident

15、ical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held

16、responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

17、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 01:40, Uncontrolle

18、d Copy, (c) BSIBS EN 4135:2009EN 4135:2009 (E) 4 1 Scope This standard specifies the characteristics of bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2lubrificated. Classification: 1 100 MPa 1) / 315 C 2)2 Normative references T

19、he following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace pro

20、ducts. EN 2491, Aerospace series Molybdenum disulphide dry lubricants Coating methods. EN 9100, Aerospace series Quality management systems Requirements (based on ISO 9001:2000) and Quality systems Model for quality assurance in design, development, production, installation and servicing (based on I

21、SO 9001:1994). EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts. ISO 3185, Aerospace Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to

22、 1 100 MPa Dimensions. ISO 3353-1, Aerospace Lead and runout threads Part 1: Rolled external threads. ISO 4095, Aerospace Bihexagonal drives Wrenching configuration Metric series. ISO 5855-2, Aerospace MJ threads Part 2 : Limit dimensions for bolts and nuts. ISO 7913, Aerospace Bolts and screws, met

23、ric Tolerances of form and position. ISO 9152, Aerospace Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa Procurement specification. TR 3775, Aerospace series Bolts and pins Materials.3) TR 4070, Aerospace series Molybdenum disulphide coatings List of commercial products. 3)3 Req

24、uired characteristics 3.1 Configuration Dimensions Masses See Figure 1 and Table 1. 1) Minimum tensile strength of the material at ambient temperature. 2) Maximum temperature that the bolt can withstand without continuous change in its original characteristics, after return to ambient temperature. T

25、he maximum temperature is determined by the surface treatment. 3) Published as ASD Technical Report at the date of publication of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 01:40, Uncontrolled Copy, (c) BSIBS EN 4135:2009EN 4135:2009 (E) 5 Dimensions and toleran

26、ces are: in conformity with ISO 3185, expressed in millimetres and apply after anodizing but before lubricating. 3.2 Tolerances of form and position ISO 7913 3.3 Materials TR 3775 (titanium alloy, classification 1 100 MPa) 3.4 Surface treatment Lubrification: a) Lubricant: see Clause 4; b) Applicati

27、on: EN 2491, 5 m to 10 m. Values in micrometres apply prior to surface treatment. Break sharp edges 0,1 to 0,4. Key 1 Radius 0,3 min. 2 1 hole D8 optional 3 Thread 4 Conforms to ISO 3353-1 5 Shape optional 6 Marking 7 4 holes D7 equidistant optional aRounded or chamfered in this area. Figure 1 3,2 1

28、,6 0,8 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 01:40, Uncontrolled Copy, (c) BSIBS EN 4135:2009EN 4135:2009 (E) 6 Table 1 Diameter code Thread aD1D2D3D4D5D6D7D8H K h12 + 0,5 0 0,5 min. min. max. H13 H13 min. h15 050 MJ50,8 - 4h6h 5 3,2 3,4 6,8 8,3 9,1 1 1,5 1 6,5 060 MJ61 -

29、 4h6h 6 4,1 4,2 7,8 9,8 10,6 1,4 1,2 7,5 070 MJ71 - 4h6h 7 4,9 5,2 8,8 11,3 12,1 1,9 1,4 8,2 080 MJ81 - 4h6h 8 5,2 6,2 9,8 12,8 13,6 1,6 8,6 100 MJ101,25 - 4h6h 10 6,7 7,9 11,8 15,7 16,7 1,6 2,4 2 10,1 120 MJ121,25 - 4h6h 12 8 9,8 13,7 18,8 19,9 2,4 11,4 Diameter code L1 0,2 b, cL2L3P R S T Wrenchin

30、g dash number dMass eLength code Nom. Nom. Tol. + 0,40 min.fg050 003 to 050 3 to 50 12 7,5 4,5 0,5 0 0,2 2,5 2,8 07 2,201 0,087 060 003 to 060 3 to 60 14 8,5 5,2 0,7 2,8 3,5 08 3,350 0,126 070 004 to 070 4 to 70 15 9,5 5,9 3,3 3,8 09 4,925 0,171 080 004 to 080 4 to 80 16,5 10,5 6,3 3,7 3,9 10 7,012

31、0,224 100 005 to 100 5 to 100 20,5 13 7,7 0,8 4,7 4,2 12 12,897 0,349 120 006 to 120 6 to 120 22,5 14,5 8,8 0,9 0 0,3 5,6 4,5 14 21,155 0,503 aIn accordance with ISO 5855-2. bIncrements: 1 for L1 30; 2 for 30 100. cIf greater lengths are required, they shall be chosen using the above increments. The

32、 length code corresponds to the length L1, completed by one or two zeros to the left, where necessary, to obtain a three digit code. dIn accordance with ISO 4095 over T min. e Approximate values (kg/1 000 pieces), calculated on the basis of 4,45 kg/dm3, given for information purposes only. They appl

33、y to bolts without holes. f Value for head and first L4.g Increase for each additional millimetre of L4. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 01:40, Uncontrolled Copy, (c) BSIBS EN 4135:2009EN 4135:2009 (E) 7 4 Designation EXAMPLE Description block BOLT Identity block EN

34、4135H050040F Number of this standard Hole code (see Table 2) Diameter code (see Table 1) Length code (see Table 1) Lubricant code (see TR 4070) NOTE If necessary the originator code I9005 should be placed between the description block and the identity block. Table 2 Holes Code Lockwire H Split pin D

35、 Lockwire and split pin C No hole (hyphen) 5 Marking EN 2424, style B (see Figure 1). 6 Technical specification ISO 9152, except for clauses: a) Approval of manufacturers: see EN 9100; b) Qualification of bolts: see EN 9133. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 01:40, Un

36、controlled Copy, (c) BSIBS EN4135:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europ

37、e and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and

38、 services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers me

39、mbers an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20

40、 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information

41、on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information

42、 Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)20899

43、6 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the

44、UK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior

45、 writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 01:40, Uncontrolled Copy, (c) BSI