BS EN 3155-023-2006 Aerospace series - Electrical contacts used in elements of connection - Contacts electrical rectangular female type A crimp class R Product standard《航空航天系列 连接部件.pdf

《BS EN 3155-023-2006 Aerospace series - Electrical contacts used in elements of connection - Contacts electrical rectangular female type A crimp class R Product standard《航空航天系列 连接部件.pdf》由会员分享，可在线阅读，更多相关《BS EN 3155-023-2006 Aerospace series - Electrical contacts used in elements of connection - Contacts electrical rectangular female type A crimp class R Product standard《航空航天系列 连接部件.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Part 023: Contacts, electrical rectangular, female, type A, crimp,class R Product standardThe Europ

2、ean Standard EN 3155-023:2006 has the status of a British StandardICS 49.060Electrical contacts used in elements of connection BRITISH STANDARD AEROSPACE SERIESBS EN 3155-023:2006BS EN 3155-023:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee

3、 on 31 May 2006 BSI 2006ISBN 0 580 48269 3A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue u

4、nder the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct ap

5、plication. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover.The BSI copyright notice displayed in this document indicates when t

6、he document was last issued.Amendments issued since publicationAmd. No. Date Comments aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related intern

7、ational and European developments and promulgate them in the UK.National forewordThis British Standard is the official English language version of EN 3155-023:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technol

8、ogy, to Subcommittee ACE/6/-/3, Aerospace Connectors, which has the responsibility to: EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3155-023April 2006ICS 49.060English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 023: Contacts, electrical rectangular, femal

9、e,type A, crimp, class R - Product standardSrie arospatiale - Contacts lectriques utiliss dans lesorganes de connexion - Partie 023 : Contacts lectriquesrectangulaires, femelles, type A, sertir, classe R - Normede produitLuft- und Raumfahrt - Elektrische Kontakte zur Verwendungin Verbindungselemente

10、n - Teil 023: ElektrischeBuchsenkontakte rechteckig, Typ A, crimpbar, Klasse R -ProduktnormThis European Standard was approved by CEN on 6 January 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status

11、 of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A versi

12、on in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia,

13、Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KO

14、MITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-023:2006: E2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.5 4 R

15、equired characteristics 5 4.1 Specific characteristics 5 4.2 Dimensions and mass 5 4.3 Marking by colour code5 4.4 Material, surface treatment.5 4.5 Permissible cables6 4.6 Tooling.6 4.7 Stripping 7 4.8 Tests 8 4.9 Gauges.9 5 Designation .11 6 Marking 11 7 Technical specification.11 EN 3155-023:2006

16、3 Foreword This European Standard (EN 3155-023:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the Nationa

17、l Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national

18、standards shall be withdrawn at the latest by October 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENEL

19、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta

20、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3155-023:20064 1 Scope This standard specifies the required characteristics, tests and tooling applicable to rectangular female electrical contacts 023, type A, crimp, class R,

21、 used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in EN 3155-022. They also mate with the male non-removable size 22 solder contacts of EN 3218-005 and 3218-006. 2 Normative references The following referenc

22、ed documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper alloy conductors for electri

23、cal cables Product standard. EN 2591*, Aerospace series Elements of electrical and optical connection Test methods. EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification. 1)EN 3155-002, Aerospace series Electrical contacts used in elements

24、 of connection Part 002: List and utilization of contacts. EN 3155-022, Aerospace series Electrical contacts used in elements of connection Part 022: Contacts, electrical rectangular, male, type A, crimp, class R Product standard. EN 3218-005, Aerospace series Connectors, rectangular, with metallic

25、shells and screw-locking Part 005: Plug with non-removable size 22 solder contacts Product standard. EN 3218-006, Aerospace series Connectors, rectangular, with metallic shells and screw-locking Part 006: Receptacle with non-removable size 22 solder contacts Product standard. EN 4008-012, Aerospace

26、series Elements of electrical and optical connection Crimping tools and associated accessories Part 012: Positioner for crimping tool M22520/2-01 Product standard. MIL-DTL-22520, Crimping tools, wire termination, general specification for. 2)*All parts quoted in this standard. 1) Published as AECMA

27、Prestandard at the date of publication of this standard. 2) Published by: Department of Defense (DOD), The Pentagon, Washington D.C. 20301, USA. EN 3155-023:20065 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3155-001 apply. 4 Required characteristi

28、cs 4.1 Specific characteristics Type A contacts are for general application and class R corresponds to an operating temperature range from 65 C to 150 C. 4.2 Dimensions and mass See Figure 1. Dimensions and tolerances are in millimetres and apply after surface treatment. Mass of one contact: 0,2 g m

29、ax. Key 1 Contact area Figure 1 4.3 Marking by colour code None 4.4 Material, surface treatment Body material : copper alloy Surface treatment : gold on appropriate undercoat for parts in copper alloy, thickness of protection not specified, selective protection acceptable EN 3155-023:20066 4.5 Permi

30、ssible cables See Table 1. Table 1 Size Size of conductors Contact Barrel AECMA CodeSection mm2AWG a Rated test current A 006 0,60 20 7,5 004 0,40 22 5 002 0,25 24 3 22 20 001 0,15 26 02 aAWG = Closest American Wire Gage. 4.6 Tooling 4.6.1 Crimping tools Conform to MIL-DTL-22520, see Table 2. The qu

31、alification selector numbers used for crimping copper and copper alloy conductors in cables EN 2083 are indicated in Table 2. These selector numbers shall be used for qualification of the contacts and in service, unless otherwise specified by the user. It is the responsibility of the user if the par

32、ameters in Table 2 are changed for service use. Table 2 Contact Cable size Tool M22520/1-01 Tool M22520/2-01 Tool M22520/7-01 Contact size Barrel size AECMA code AWGa Positioner Selector numberPositioner Selector numberPositioner Selector number001 26 2 002 24 3 004 22 4 22 20 006 20 Not applicable

33、EN 4008-0124 Not applicable aAWG = Closest American Wire Gage. EN 3155-023:20067 4.6.2 Insertion/extraction tool See Figure 2. Key 1 Both ends 4 Body design optional 2 Colour red 5 Slit is measured with the tool in a free state 3 Colour green 6 Slot design optional break edges 0,25 NOTE Tip of tool

34、must be capable of accepting a pin of 2,08 0,12 after being inserted into a 1,98 0,12 hole to a depth of min. 5,84. Figure 2 4.7 Stripping Stripped length: (5,2 0,2) mm. EN 3155-023:20068 4.8 Tests See Table 3. Table 3 Applicable EN 2591- Test Not applicableAccording to EN 3155-001 Remarks 101 Visua

35、l examination X 102 Examination of dimensions and mass X 201 Contact resistance - low level X Initially 8 m max. 10 m after test 202 Contact resistance at rated current X Initially 8 m max. 10 m after test 204 Discontinuity of contacts in the microsecond range X 210 Electrical overload X 15 A for 30

36、0 s 75 A for 1 s 150 A for 0,35 s 220 Contact/conductor joint ageing by current and temperature cycling X 301 Endurance at temperature X T = (150 2) C Duration : 1 000 h 305 Rapid change of temperature X TA= (150 2) C TB= ( 65 2) C 307 Salt mist X 315 Fluid resistance X 319 Gastightness of solderles

37、s wrapped connections X 402 Shock X Method A: severity 100 403 Sinusoidal and random vibration X Method B, Figure 3, level J Ambient temperature 406 Mechanical endurance X 415 Test probe damage (female contact) X Gauge Figure 2 Torque: 0,035 Nm 416 Contact bending strength X 417 Tensile strength (cr

38、imped connection) X 418 Gauge insertion/extraction forces (female contacts) X Gauge Figure 3 424 Stripping force, solderless wrapped connections X 425 Unwrapping capability, solderless wrapped connections X 501 Soft solderability X 502 Restricted entry X continued EN 3155-023:20069 Table 3 (conclude

39、d) Applicable EN 2591- Test Not applicableAccording to EN 3155-001 Remarks 503 Contact deformation after crimping X 507 Plating porosity X 508 Measurement of thickness of coating on contacts X The measured thickness shall be recorded. 509 Adhesion of coating on contacts X 513 Magnetic permeability X

40、 514 Solderability of contacts with self-contained solder and flux X 4.9 Gauges 4.9.1 Gauge for test EN 2591-415 See Figure 3. Dimensions and tolerances are in millimetres. Key 1 Broken angles Figure 3 EN 3155-023:200610 4.9.2 Gauge for test EN 2591-418 See Figure 4 and Table 4. Dimensions and toler

41、ances are in millimetres. Material: hardened steel Mass of gauge B (measurement of force of retention): (10 02+) g Figure 4 Table 4 Gauge a b 0,05 L 0,20 M min. A 0,54+ 0,005 0 B 0,480 0,005 1,27 4,20 2,4 EN 3155-023:200611 5 Designation EXAMPLE Description block CONTACT, ELECTRICAL Identity block E

42、N3155-023F2220 Number of this standard Type of contact: F = Female Contact size (see Table 1) Barrel size (see Table 1) Description block INSERTION / EXTRACTION TOOL Identity block EN3155-023T Number of this standard T: Tool NOTE If necessary, the code I9005 shall be placed between the description b

43、lock and the identity block. 6 Marking See EN 3155-001. 7 Technical specification See EN 3155-001. EN 3155-023:2006BS ENBSI389 Chiswick High RoadLondonW4 4AL3155-023:2006BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the

44、 UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improv

45、e the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. F

46、ax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. T

47、el: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unles

48、s otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its produ

49、cts and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: