BS 6736-1986 Code of practice for hand signalling for use in agricultural operations《农用手发信号实用规程》.pdf

《BS 6736-1986 Code of practice for hand signalling for use in agricultural operations《农用手发信号实用规程》.pdf》由会员分享，可在线阅读，更多相关《BS 6736-1986 Code of practice for hand signalling for use in agricultural operations《农用手发信号实用规程》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS6736:1986 Code of practice for Hand signalling for use in agricultural operations UDC656.054.3+800.951:63BS6736:1986 This British Standard, having been prepared under the directionof the Agricultural Machinery and Implements Standards Committee, was published under the authority o

2、fthe Board of BSI and comesintoeffect on 31 October1986 BSI11-1999 The following BSI references relate to the work on this standard: Committee referenceAGE/26 Draft for comment85/71146DC ISBN 0 580 15396 7 Committees responsible for this British Standard The preparation of this British Standard was

3、entrusted by the Agricultural Machinery and Implements Standards Committee (AGE/-) to Technical CommitteeAGE/26 upon which the following bodies were represented: Agricultural Engineers Association Agricultural Training Board Association of Agricultural Education Staffs British Agricultural and Garde

4、n Machinery Association Ltd. Department of Transport (Highways) Forestry Commission Health and Safety Executive National Farmers Union National Institute of Agricultural Engineering National Proficiency Tests Council Trades Union Congress Amendments issued since publication Amd. No. Date of issue Co

5、mmentsBS6736:1986 BSI 11-1999 i Contents Page Committees responsible Inside front cover Foreword ii 1 Scope 1 2 General 1 3 Hand signals 1 Figure 1 Move toward me, follow me 1 Figure 2 Move away from me 1 Figure 3 Travel in direction indicated 2 Figure 4 Raise 2 Figure 5 Lower 3 Figure 6 This far to

6、 go 3 Figure 7 Stop 4 Figure 8 Operations cease 4BS6736:1986 ii BSI 11-1999 Foreword This code of practice has been prepared under the direction of the Agricultural Machinery and Implements Standards Committee. This code has been prepared under the direction of the Agricultural Machinery and Impleme

7、nts Standards Committee. It is based on a proposal submitted by the National Farmers Union. When an operator cannot see clearly or when noise prevents normal verbal communication, hand signals from a second person can ensure safe and efficient operation. The hand signals in this code of practice hav

8、e been developed to minimize the risk of accidents occurring when operating fixed or mobile machinery, including tractors, in agricultural and horticultural buildings, yards, fieldsetc. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standa

9、rds are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to4 and a back cover. This standard has been updated (s

10、ee copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS6736:1986 BSI 11-1999 1 1 Scope This British Standard describes hand signals for use in agricultural operations, especially when noise or distance precludes the use

11、of normal voice communication. The purpose of these hand signals is to provide means of communication, in the interests of safety, between two persons. 2 General 2.1 Signals should be made in a clear and positive manner. 2.2 The position of the arm and palm should be the primary means for conveying

12、instructions by hand signals. 2.3 The method of making the hand signals and their interpretations should be in accordance with clause3. 3 Hand signals 3.1 Move toward me, follow me (seeFigure 1) Hold one arm horizontal towards the operator, palm up, and motion toward the body. Repeat as necessary. 3

13、.2 Move away from me (seeFigure 2) Hold one arm extended above the head, palm towards the operator then swing it forward in the direction of desired movement until it is horizontal, palm down. Repeat as necessary. Figure 1 Move toward me, follow me Figure 2 Move away from meBS6736:1986 2 BSI 11-1999

14、 3.3 Move in direction indicated (seeFigure 3) Move the appropriate hand horizontally at shoulder level repeatedly, to and from the body in the direction of the desired movement, keeping the palm facing outwards. 3.4 Raise (seeFigure 4) Extend both arms to the front at waist level, palms upwards. Ra

15、ise and lower both arms repeatedly in parallel. Figure 3 Travel in direction indicated Figure 4 RaiseBS6736:1986 BSI 11-1999 3 3.5 Lower (seeFigure 5) Extend both arms to the front at shoulder level, palms downward, hands close together. Lower and raise both arms repeatedly in parallel. 3.6 This far

16、 to go (seeFigure 6) Place palms at ear level facing head and move laterally inward to indicate remaining distance to go. Figure 5 Lower Figure 6 This far to goBS6736:1986 4 BSI 11-1999 3.7 Stop (seeFigure 7) Raise both hands upwards to the full extent of the arm, palms to the front. Hold that posit

17、ion until the signal is understood. 3.8 Operations cease (seeFigure 8) Draw both hands, palms down, across the waist in a repetitive side swipe and return motion. Continue these actions until the signal is understood. Figure 7 Stop Figure 8 Operations ceaseblankBS6736:1986 BSI 389 Chiswick High Road

18、 London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or re

19、vision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform t

20、he Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Bu

21、ying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Br

22、itishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give d

23、etails on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact

24、Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extrac

25、t may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbo

26、ls, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.