ASTM F832-1990(2001) Standard Classification for Security Seals《安全密封件的标准分类》.pdf

《ASTM F832-1990(2001) Standard Classification for Security Seals《安全密封件的标准分类》.pdf》由会员分享，可在线阅读，更多相关《ASTM F832-1990(2001) Standard Classification for Security Seals《安全密封件的标准分类》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: F 832 90 (Reapproved 2001)Standard Classification forSecurity Seals1This standard is issued under the fixed designation F 832; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in pare

2、ntheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This classification covers categories of commerciallyavailable security seals. Special-purpose seals, such as fiberoptic and sophisticated electroni

3、c seals, are not covered by thisclassification.2. Terminology2.1 Definitions:2.1.1 security seala passive, one-time locking device todetect tampering or entry, and may be of substantial construc-tion. Seals require inspection to indicate whether tampering hasoccurred or entry has been attempted.2.1.

4、1.1 barrier type security sealsseals that are con-structed and manufactured of material such as steel or cablewith the intent to delay intrusion, and are generally removedwith quality bolt cutters or cable cutters.2.1.1.2 indicative type security sealsseals that are con-structed and manufactured of

5、material that can easily be brokenby hand or simple snipping tool or shear.3. Significance and Use3.1 This standard is intended to provide information oncurrently available commercial seals as a guide in theirselection for specific applications. This classification is notintended to inhibit innovati

6、on or development of new types ofseals.4. Basis of Classification4.1 Security seals in this standard are classified by theirconfiguration and the material from which they are made.5. Types of Seals5.1 WireWire seals consist of a length of wire secured ina loop by some type of seizing device. Example

7、s of this typeare crimp wire, fold wire, and cup wire.5.2 PadlockThe padlock type of seal consists of a lockingbody with a bail attached. Examples of this type of seal are thewire shackle padlock (metal or plastic body), plastic padlock,and keyless padlock.5.3 StrapThe strap seal is a metal or plast

8、ic strap which issecured to form a loop by inserting one end into or through alocking mechanism on the other end. Examples of this type arethe box and ball end seal.5.4 CableThe cable seal consists of a cable and a lockingmechanism. On a one-piece seal, the locking or seizingmechanism is permanently

9、 attached to one end of the cable. Atwo-piece cable seal has a separate locking mechanism whichslips onto the cable or prefabricated end.5.5 BoltThe bolt seal is a metal rod, threaded or un-threaded, with a formed head, and is secured with a separatelocking mechanism. Threaded bolts are usually bent

10、 afterinstallation to upset the threads and prevent undetected re-moval of the locking mechanism.5.6 Cinch or Pull-UpThe cinch or pull-up type is anindicative seal. It consists of a thin strip of material, serrated ornonserrated, with a locking mechanism attached to one end.The free end is pulled th

11、rough a hole in the locking mechanismand drawn up to the necessary tightness. Cinch or pull-up typeseals may have multiple lock positions. These seals aregenerally made of synthetics such as nylon or plastic andshould not be compared to simple electrical ties.5.7 TwistTwist seals are made of steel r

12、od or heavy gagewire of various diameters, which is inserted through thelocking fixture and twisted around itself by use of a tool.5.8 ScoredThis seal is a metal strip which is scoredperpendicular to the length of the strip. The strip is passedthrough the locking fixture and bent at the score mark.R

13、emoval of the seal requires bending at the score mark whichresults in breakage of the seal.5.9 LabelLabel seals are frangible seals consisting of apaper or plastic backing with adhesive. The combination ofbacking and adhesive are chosen to cause the seal to tear whenremoval is attempted.6. Keywords6

14、.1 barrier security seal; indicative security seal; lockingdevice; security seal1This classification is under the jurisdiction of ASTM Committee F12 onSecurity Systems and Equipmentand is the direct responsibility of SubcommitteeF12.50on Locking Devices.Current edition approved Jan. 26, 1990. Publis

15、hed March 1990. Originallypublished as F 832 88. Last previous edition F 832 88.1Copyright ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.The American Society for Testing and Materials takes no position respecting the validity of any patent rights asserted in connection

16、with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any suchpatent rights, and the risk of infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible t

17、echnical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM Headquarters. Your comments will receive careful consideration at a me

18、eting of the responsibletechnical committee, which you may attend. If you feel that your comments have not received a fair hearing you should make yourviews known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the above address or at610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website (www.astm.org).F 8322