ASTM D7045-2004(2010) 7500 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities《RCRC垃圾清除器械、探测.pdf

《ASTM D7045-2004(2010) 7500 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities《RCRC垃圾清除器械、探测.pdf》由会员分享，可在线阅读，更多相关《ASTM D7045-2004(2010) 7500 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities《RCRC垃圾清除器械、探测.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: D7045 04 (Reapproved 2010)Standard Guide forOptimization of Ground Water Monitoring Constituents forDetection Monitoring Programs for RCRA Waste DisposalFacilities1This standard is issued under the fixed designation D7045; the number immediately following the designation indicates the y

2、ear oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This standard provides a general method of selectinge

3、ffective constituents for detection monitoring programs atRCRA Waste Disposal Facilities. The process described in thisstandard presents a methodology that takes into considerationphysical and chemical characteristics of the source material(s),the surrounding hydrogeologic regime, and site-specificg

4、eochemistry to identify and select those parameters thatprovide most effective detection of a potential release from awaste management unit (WMU).1.2 In the following sections, complete details of evaluationof effective monitoring constituents for a groundwaterdetection-monitoring program were based

5、 on site-specificwaste characterization.1.3 The statistical methodology described in the followingsections should be used as guidance. Other methods may alsobe appropriate based on site-specific conditions or for moni-toring situations or media that are not presented in thisdocument.1.4 This practic

6、e offers an organized collection of informa-tion or a series of options and does not recommend a specificcourse of action. This document cannot replace education,experience and professional judgements. Not all aspects of thispractice may be applicable in all circumstances. This ASTMstandard is not i

7、ntended to represent or replace the standard ofcare by which the adequacy of a given professional servicemust be judged without consideration of a projects manyunique aspects. The word standard in the title of this documentonly means that the document has been approved through theASTM consensus proc

8、ess.1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory requirements prior to use.2. Referen

9、ced Documents2.1 ASTM Standards:2D5792 Practice for Generation of Environmental Data Re-lated to Waste Management Activities: Development ofData Quality ObjectivesD6312 Guide for Developing Appropriate Statistical Ap-proaches for Ground-Water Detection Monitoring Pro-grams3. Terminology3.1 Definitio

10、ns:3.1.1 detection monitoring programa program of moni-toring for the expressed purpose of determining whether or notthere has been a release of contaminant to groundwater. UnderRCRA, Detection Monitoring involves collection of ground-water samples from compliance point and upgradient monitor-ing we

11、lls on a semi-annual basis for analysis of hazardousconstituents of concern, as specified under 40 CFR 264.98.Results are evaluated to determine if there is a statisticallysignificant exceedance of the ground-water protection criteriaand/or background. At non-RCRA sites, monitoring is con-ducted in

12、a similar manner and results are compared to criteriato determine if there is a statistically significant exceedance.3.1.2 indicator constituentsa class of analytes that, whendetected in significant concentrations, provide an indication ofa change in organic or inorganic geochemistry that may befrom

13、 a waste source and supports further characterization.3.1.3 leachatea liquid that has passed through or emergedfrom solid waste and contains soluble, suspended, or misciblematerials removed from such waste.1This guide is under the jurisdiction ofASTM Committee D18 on Soil and Rockand is the direct r

14、esponsibility of Subcommittee D18.21 on Ground Water andVadose Zone Investigations.Current edition approved July 1, 2010. Published September 2010. Originallyapproved in 2004. Last previous edition approved in 2004 as D704504. DOI:10.1520/D7045-04R10.2For referenced ASTM standards, visit the ASTM we

15、bsite, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United St

16、ates.3.1.4 nonparametric a term referring to a statistical tech-nique in which the probability distribution of the constituent inthe population is unknown or is not restricted to be of aspecified form.3.1.5 nonparametric prediction limitthe largest (or sec-ond largest) of n background samples. The c

17、onfidence levelassociated with the nonparametric prediction limit is a functionof n, m, and k.3.1.6 outliera measurement that is statistically inconsis-tent with the distribution of other measurements from which itwas drawn.3.1.7 practical quantitation limit (PQL)the lowest levelthat can reliably ac

18、hieved with specified limits of precision andaccuracy during routine laboratory operating conditions.3.1.8 qualified groundwater scientist (QGWS)a scientistor engineer who has received a baccalaureate or postgraduatedegree in the natural sciences or engineering and has sufficienttraining in groundwa

19、ter hydrology and related fields as may bedemonstrated by state registration, professional certifications,or completion of accredited university programs that enable theindividual to make sound professional judgments regardinggroundwater monitoring, contaminant fate and transport, andcorrective acti

20、on.3.1.9 Resource Conservation and Recovery Act(RCRA)PL 94-580. Found at 40 CFR 240-271. EnactedNovember 21, 1976 and amended since, RCRAs majoremphasis is the control of hazardous waste disposal. It controlsall solid-waste disposal and encourages recycling and alterna-tive energy sources.3.1.10 upp

21、er confidence limit (UCL)an upper limit thathas a specified probability (for example, 95 %) of including thetrue concentration (or other parameter). Taken together withlower confidence limit, forms a confidence interval that willinclude the true concentration with confidence level thataccounts for b

22、oth tail areas.3.1.11 upper limit (UL)an upper limit of a data set ofpopulation (n) that may be statistically or non-statisticallybased.3.1.12 waste management unit (WMU)a permitted wastedisposal unit or temporary containment structure that is de-signed and constructed to inhibit the migration of wa

23、stes to theadjacent environment.3.2 Symbols:3.2.1 nthe number of background (offsite or upgradient)measurements.3.2.2 kthe number of future comparisons for a singlemonitoring event (for example, the number of downgradientmonitoring wells multiplied by the number of constituents tobe monitored) for w

24、hich statistics are to be computed.3.2.3 mthe number of onsite or downgradient measure-ments used in computing the onsite mean concentration.4. Summary of Guide4.1 The guide is summarized as figures shown in Figs. 1-3.These figures provides a flow-chart illustrating the steps usedin characterizing t

25、he source material, collecting backgrounddata, establishing an upper limit for each analyte included inthe program, and/or establishing effective monitoring constitu-ents that will provide an indication of whether the WMU ispotentially impacting surface and groundwater in the vicinityof the unit.5.

26、Significance and Use5.1 The principal use of this standard is in the identificationof effective groundwater monitoring constituents for adetection-monitoring program. The significance of the guide isto minimize the false positive rate for the facility by onlymonitoring those constituents that are in

27、trinsic to the wastemass and eliminate those constituents that are present inbackground in concentrations that confound evaluation fromdowngradient wells.5.2 Federal, state and local regulations require large genericlists of constituents to be monitored in an effort to detect arelease from a WMU. Ho

28、wever, identification and selection ofparameters based on site-specific physical and chemical con-ditions are in many cases also acceptable to regulatory agenciesand result in a more effective and environmentally protectivegroundwater monitoring system.5.2.1 Naturally occurring soil and groundwater

29、constituentswithin and near a WMU area should be determined prior to thedevelopment of a monitoring program. This is important in theselection of site-specific constituents lists and avoiding diffi-culties with a regulatory authority regarding sources of moni-tored constituents.5.2.2 Site-specific l

30、ists of constituents relative to the WMUwill provide for the regulator those constituents which willeffectively measure the performance of a WMU rather than theuse of a generic list that could include naturally occurringconstituents as well as those not present in the WMU.5.3 Site-specific constitue

31、nt lists often result in fewer moni-tored constituents (that is, monitoring programs are optimized).This process is critical to the overall success of the monitoringprogram for the following reasons:5.3.1 The reduction of the monitoring constituents to onlythose found or expected to be found or deri

32、ved from site-specific source material will reduce the number of false-positive results since only those parameters that could indicatea release are monitored.5.3.2 The use of constituents that contrast significantly tobackground groundwater eliminates those that could lead toerroneous results merel

33、y due to temporal and spatial variabilityof components found in the natural geochemistry of theupper-most water-bearing zone.5.3.3 Where statistics are required, fewer statistical com-parisons through well and constituent optimization enhancesthe statistical power (or effectiveness) of the monitorin

34、gprogram (Gibbons, 1994; USEPA, July 1992).5.3.4 Eliminating the cost of unnecessary laboratory analy-ses produces a more efficient and cost-effective monitoringprogram and minimizes the effort required by both the localenforcement agency and the owner/operator to respond (eitherwith correspondence

35、or additional field/laboratory efforts) toerroneous detection decisions.5.4 This type of approach is acceptable to regulatory agen-cies arid applicable under most groundwater monitoring pro-grams under RCRA regulations. For example, in determiningthe alternate constituent list at Solid Waste Facilit

36、ies, 40 CFRD7045 04 (2010)2258.54(a)(l) allows for deletion of 40 CFR 258 Appendix Iconstituents if it can be shown that the removed constituentsare not reasonably expected to be in or derived from the wastecontained in the unit. 40 CFR 258(a)(2) allows approved Statesto establish an alternate list

37、of inorganic parameters in lieu ofall or some of the heavy metals (constituents 1-14 in AppendixI to Part 258), if the alternative constituents provide a reliableindication of inorganic releases from the unit to groundwater.FIG. 1 Phase IIndicator Parameter IdentificationD7045 04 (2010)35.5 The fram

38、ework for this standard is generally based onthe guidelines established under 40 CFR 258.54(a)(l) to opti-mize a groundwater-monitoring network in such a manner as tostill provide an early warning system of a release from theWMU. This guidance document is, however, applicable for allWMU, not just th

39、ose associated with solid waste disposalfacilities. In determining the alternative constituents, consider-ation must be made for: (1) the types, quantities, and concen-trations of constituents in wastes managed at the wastemanagement unit (or WMU); (2) the mobility, stability, andFIG. 1 Phase IIndic

40、ator Parameter Identification (continued)D7045 04 (2010)4persistence of waste constituents in the unsaturated zonebeneath the WMU; (3) the detectability of indicator param-eters, waste constituents, and reaction products in groundwater;and (4) the concentration or contrast between monitoringconstitu

41、ents in leachate and in background groundwater.5.6 An essential factor in this guide is the knowledge of thequality of the potential source material for example, the typesand concentrations of liquid or other leachable wastes (that is,leachate) within the WMU. The characterization of the sourcemater

42、ial is critical in determining an optimum set of indicatorFIG. 2 Phase IIGeochemical Properties EvaluationD7045 04 (2010)5parameters that provide an early warning system of a releasefrom the unit. Details for the appropriate levels of effortrequired to characterize the waste stream or source(s) in t

43、heWMU are not included within this guidance document. Wastestream and/or source data collected by the owner/operator aswell as liquid data from key collection points (that is, sumps ornatural gravity drain collection points) are an integral part ofany waste characterization process.5.7 Another key f

44、actor to be used in this guide is knowledgeof background quality of groundwater unaffected by the WMUand knowledge of local sources other than the WMU that maypresently be impacting groundwater quality. The main objec-tive then is to choose those constituents that are derived fromthe WMU (for exampl

45、e, are present in the leachate or residualliquids) at much higher concentrations than groundwaterand/or that are only present in the waste or waste residuum (forFIG. 3 Monitoring Program ImplementationD7045 04 (2010)6example, leachate) and absent in groundwater. The analyteschosen must also be mobil

46、e, persistent, and easily quantifiablein the specific hydrogeologic and groundwater regime.6. Procedure6.1 This practice is used to identify and select site-specificmonitoring constituents. The practice requires site-specificcharacterization of the liquids derived from the source (that is,leachate)

47、and background groundwater geochemistry (that is,the types, quantities, and concentrations of constituents presentin the WMU). First, comparison of maximum detected leachateconstituents to background prediction limits are used as a“first-order” process to identify indicator parameters inleachate tha

48、t contrast significantly to background groundwaterquality. Next, a mixing model is used as a “second-order”process, if necessary, to further identify analytes that are bestsuited for the detection-monitoring program based on sitehydrogeology (that is, groundwater flow rates). Finally, otherprocesses

49、, primarily geochemical chemical interactions, can beaddressed as a “third order screening process” for those sitesthat have adequately completed the first two processes anddesire a more representative subset of the source material.Once a suitable list of site specific constituents is identified, aQGWS can select and propose a final analyte list for thedetection-monitoring program at the WMU. A sequential flowchart has been included as Attachment 1 to provide a means tofollow the constituent optimization program outlined in thisstandard.6.2 Source Charac