ASHRAE 145 2 ADD D-2016 Laboratory Test Method for Assessing the Performance of Gas-Phase Air Cleaning Systems Air Cleaning Devices.pdf

《ASHRAE 145 2 ADD D-2016 Laboratory Test Method for Assessing the Performance of Gas-Phase Air Cleaning Systems Air Cleaning Devices.pdf》由会员分享，可在线阅读，更多相关《ASHRAE 145 2 ADD D-2016 Laboratory Test Method for Assessing the Performance of Gas-Phase Air Cleaning Systems Air Cleaning Devices.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、ANSI/ASHRAE Addendum d toANSI/ASHRAE Standard 145.2-2011Laboratory Test Methodfor Assessing thePerformance of Gas-PhaseAir Cleaning Systems:Air Cleaning DevicesApproved by ASHRAE on June 30, 2016, and by the American National Standards Institute on July 1, 2016.This addendum was approved by a Standi

2、ng Standard Project Committee (SSPC) for which the Standards Committee has estab-lished a documented program for regular publication of addenda or revisions, including procedures for timely, documented, con-sensus action on requests for change to any part of the standard. The change submittal form,

3、instructions, and deadlines may beobtained in electronic form from the ASHRAE website (www.ashrae.org) or in paper form from the Senior Manager of Standards. The latest edition of an ASHRAE Standard may be purchased on the ASHRAE website (www.ashrae.org) or from ASHRAE Cus-tomer Service, 1791 Tullie

4、 Circle, NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org. Fax: 678-539-2129. Telephone: 404-636-8400 (worldwide), or toll free 1-800-527-4723 (for orders in US and Canada). For reprint permission, go towww.ashrae.org/permissions. 2016 ASHRAE ISSN 1041-2336ASHRAE is a registered trademark of the

5、 American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.ANSI is a registered trademark of the American National Standards Institute.SPECIAL NOTEThis American National Standard (ANS) is a national voluntary consensus Standard developed under the auspices of ASHRAE. Consensus i

6、s definedby the American National Standards Institute (ANSI), of which ASHRAE is a member and which has approved this Standard as an ANS, as“substantial agreement reached by directly and materially affected interest categories. This signifies the concurrence of more than a simple majority,but not ne

7、cessarily unanimity. Consensus requires that all views and objections be considered, and that an effort be made toward their resolution.”Compliance with this Standard is voluntary until and unless a legal jurisdiction makes compliance mandatory through legislation. ASHRAE obtains consensus through p

8、articipation of its national and international members, associated societies, and public review.ASHRAE Standards are prepared by a Project Committee appointed specifically for the purpose of writing the Standard. The ProjectCommittee Chair and Vice-Chair must be members of ASHRAE; while other commit

9、tee members may or may not be ASHRAE members, allmust be technically qualified in the subject area of the Standard. Every effort is made to balance the concerned interests on all Project Committees. The Senior Manager of Standards of ASHRAE should be contacted fora. interpretation of the contents of

10、 this Standard,b. participation in the next review of the Standard,c. offering constructive criticism for improving the Standard, ord. permission to reprint portions of the Standard.DISCLAIMERASHRAE uses its best efforts to promulgate Standards and Guidelines for the benefit of the public in light o

11、f available information and acceptedindustry practices. However, ASHRAE does not guarantee, certify, or assure the safety or performance of any products, components, or systemstested, installed, or operated in accordance with ASHRAEs Standards or Guidelines or that any tests conducted under its Stan

12、dards or Guidelineswill be nonhazardous or free from risk.ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDSASHRAE Standards and Guidelines are established to assist industry and the public by offering a uniform method of testing for rating purposes, bysuggesting safe practices in designing and insta

13、lling equipment, by providing proper definitions of this equipment, and by providing other informationthat may serve to guide the industry. The creation of ASHRAE Standards and Guidelines is determined by the need for them, and conformanceto them is completely voluntary.In referring to this Standard

14、 or Guideline and in marking of equipment and in advertising, no claim shall be made, either stated or implied,that the product has been approved by ASHRAE.ASHRAE Standing Standard Project Committee 145.2Cognizant TC: 2.3, Gaseous Air Contaminants and Gas-Contaminant Removal EquipmentSPLS Liaison: K

15、eith I. EmersonMatt Middlebrooks*, Chair W. Peter Freeman* Christopher O. Muller*W. Brad M. Stanley*, Vice-Chair Sanjeev K. Hingorani* Kartik Potukuchi*Carolyn M.L. Kerr*, Secretary Kevin Kwong* David A. Schaaf, Jr.*Nick H. Agopian* Chang-Seo Lee* Paula J. Levasseur*Denotes members of voting status

16、when the document was approved for publicationASHRAE STANDARDS COMMITTEE 20162017Rita M. Harrold, Chair Julie M. Ferguson Cyrus H. NasseriSteven J. Emmerich, Vice-Chair Michael W. Gallagher David RobinJames D. Aswegan Walter T. Grondzik Peter SimmondsNiels Bidstrup Vinod P. Gupta Dennis A. StankeDon

17、ald M. Brundage Susanna S. Hanson Wayne H. Stoppelmoor, Jr.Waller S. Clements Roger L. Hedrick Jack H. ZarourDrury B. Crawley Rick M. Heiden William F. Walter, BOD ExOJohn F. Dunlap, Srinivas Katipamula Patricia Graef, COJames W. Earley, Jr. Arsen K. MelikovKeith I. Emerson R. Lee Millies, Jr.Stepha

18、nie C. Reiniche, Senior Manager of Standards ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.ANSI/ASHRAE Addendum d to ANSI/ASHRAE Standard 145.2-2011 1(Th

19、is foreword is not part of this standard. It is merelyinformative and does not contain requirements necessaryfor conformance to the standard. It has not been pro-cessed according to the ANSI requirements for a standardand may contain material that has not been subject topublic review or a consensus

20、process. Unresolved objec-tors on informative material are not offered the right toappeal at ASHRAE or ANSI.)FOREWORDTable 6.1.4.1 sets forth required compounds for testing in cer-tain categories of compounds. Because there are many diffi-culties in performing this test for formaldehyde, it isrecomm

21、ended that the method no longer require formalde-hyde testing. Formaldehyde remains an acceptable compoundfor testing with recommended concentrations. Note: In this addendum, changes to the current standardare indicated in the text by underlining (for additions) andstrikethrough (for deletions) unle

22、ss the instructions specifi-cally mention some other means of indicating the changes. Addendum d to Standard 145.2-2011Change Table 6.1.4.1 as shown. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitte

23、d without ASHRAEs prior written permission.2 ANSI/ASHRAE Addendum d to ANSI/ASHRAE Standard 145.2-2011TABLE 6.1.4.1 Standard Test Challenge GasesCategory / Chemical CAS # MW*LowConc.(ppb)HighConc.(ppm)NIOSHREL TWA(ppm)*OSHAPEL TWA(ppm)*High Conc. Rationale*Capacity Used*Required ChemicalAcid GasesSu

24、lfur Dioxide 7446-09-5 64.1 50 35 2 5 AA 6%, x8%, ybHydrogen chloride 7647-01-0 36.5 75 5 5 (c) 5 (c) DD 12%, ybHydrogen sulfide 7783-06-4 34.1 100 25 10 (c) 20 (c) CC 12%, x20%, ybNO2+ 10102-44-0 46.0 50 30 1 (st) 5 (c) AA 6%, z20%, xAldehydesFormaldehyde 50-00-0 30.0 100 1 0.016 0.75 EE 3%, xAceta

25、ldehyde 75-07-0 44.1 100 15 None 200 AA 10%, xHexanal 66-25-1 100.2 100 None NoneBasic GasesAmmonia 7664-41-7 17.0 100 75 25 50 AA 5%, yaMethylpyrrolidone 872-50-4 99.13 100 5 None None AA 15%, xyaOxidizing GasesOzone 10028-15-6 48.0 75 0.5 0.1 (c) 0.1 BB NoneVOCsToluene 108-88-3 92.1 400 50 100 200

26、 AA 20%, z2-ButaNone 78-93-3 72.1 400 65 200 200 AA 20%, zAcetone 67-64-1 58.1 400 20 250 1,000 AA 5%, zBenzene 71-43-2 78.1 400 60 0.1 1 AA 20%, zCyclohexane 110-82-7 84.2 400 55 300 300 AA 20%, zCyclopentane 287-92-3 70.2 400 50 600 None AA 15%, zDichloromethane 75-09-2 84.9 400 50 None 25 AA 20%,

27、 zEthanol 64-17-5 46.1 400 50 1,000 1,000 AA 10%, zHexane 110-54-3 86.2 400 25 50 500 AA 10%, ziso-Butanol 78-83-1 74.1 400 45 50 100 AA 15%, zIsopropanol 67-63-0 60.1 400 35 400 400 AA 10%, zMEK 78-93-3 72.1 400 30 200 200 AA 10%, zTetrachloroethene 127-18-4 165.8 400 25 None 100 AA 20%, zm-Xylene

28、o-Xylenep-Xylene108-38-395-47-6106-42-3106.2 400 45 100 100 AA 20%, zWarfareDMMP 756-79-6 124.1 75 20 None NoneMiscellaneousChlorine 7782-50-5 70.9 100 30 0.5 (c) 1 (c) AA 10%, z12%, ybNoneCarbon Monoxide 630-08-0 28.0 100 35 35 50 DDCarbon Dioxide 124-38-9 44.0 400 5,000 5,000 5,000 DD ASHRAE (www.

29、ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.POLICY STATEMENT DEFINING ASHRAES CONCERNFOR THE ENVIRONMENTAL IMPACT OF ITS ACTIVITIESASHRAE is concerned with the imp

30、act of its members activities on both the indoor and outdoor environment.ASHRAEs members will strive to minimize any possible deleterious effect on the indoor and outdoor environment ofthe systems and components in their responsibility while maximizing the beneficial effects these systems provide,co

31、nsistent with accepted Standards and the practical state of the art.ASHRAEs short-range goal is to ensure that the systems and components within its scope do not impact theindoor and outdoor environment to a greater extent than specified by the Standards and Guidelines as established byitself and ot

32、her responsible bodies.As an ongoing goal, ASHRAE will, through its Standards Committee and extensive Technical Committee structure,continue to generate up-to-date Standards and Guidelines where appropriate and adopt, recommend, and promotethose new and revised Standards developed by other responsib

33、le organizations.Through its Handbook, appropriate chapters will contain up-to-date Standards and design considerations as thematerial is systematically revised.ASHRAE will take the lead with respect to dissemination of environmental information of its primary interest andwill seek out and dissemina

34、te information from other responsible organizations that is pertinent, as guides to updatingStandards and Guidelines.The effects of the design and selection of equipment and systems will be considered within the scope of thesystems intended use and expected misuse. The disposal of hazardous material

35、s, if any, will also be considered.ASHRAEs primary concern for environmental impact will be at the site where equipment within ASHRAEs scopeoperates. However, energy source selection and the possible environmental impact due to the energy source andenergy transportation will be considered where poss

36、ible. Recommendations concerning energy source selectionshould be made by its members. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.ASHRAE 1791 Tullie C

37、ircle NE Atlanta, GA 30329 www.ashrae.org About ASHRAEASHRAE, founded in 1894, is a global society advancing human well-being through sustainable technology for thebuilt environment. The Society and its members focus on building systems, energy efficiency, indoor air quality,refrigeration, and susta

38、inability. Through research, Standards writing, publishing, certification and continuingeducation, ASHRAE shapes tomorrows built environment today. For more information or to become a member of ASHRAE, visit www.ashrae.org.To stay current with this and other ASHRAE Standards and Guidelines, visit ww

39、w.ashrae.org/standards.Visit the ASHRAE BookstoreASHRAE offers its Standards and Guidelines in print, as immediately downloadable PDFs, on CD-ROM, and viaASHRAE Digital Collections, which provides online access with automatic updates as well as historical versions ofpublications. Selected Standards

40、and Guidelines are also offered in redline versions that indicate the changes madebetween the active Standard or Guideline and its previous version. For more information, visit the Standards andGuidelines section of the ASHRAE Bookstore at www.ashrae.org/bookstore.IMPORTANT NOTICES ABOUT THIS STANDA

41、RDTo ensure that you have all of the approved addenda, errata, and interpretations for thisStandard, visit www.ashrae.org/standards to download them free of charge.Addenda, errata, and interpretations for ASHRAE Standards and Guidelines are no longerdistributed with copies of the Standards and Guidelines. ASHRAE provides these addenda,errata, and interpretations only in electronic form to promote more sustainable use ofresources.7/16