ANSI AWS D18.2-2009 GUIDE TO WELD DISCOLORATION LEVELS ON INSIDE OF AUSTENITIC STAINLESS STEEL TUBE (Abstract To Purchase Charts Call 1-800-854-7179 USA Canada or 303-397-7956 Worl.pdf

《ANSI AWS D18.2-2009 GUIDE TO WELD DISCOLORATION LEVELS ON INSIDE OF AUSTENITIC STAINLESS STEEL TUBE (Abstract To Purchase Charts Call 1-800-854-7179 USA Canada or 303-397-7956 Worl.pdf》由会员分享，可在线阅读，更多相关《ANSI AWS D18.2-2009 GUIDE TO WELD DISCOLORATION LEVELS ON INSIDE OF AUSTENITIC STAINLESS STEEL TUBE (Abstract To Purchase Charts Call 1-800-854-7179 USA Canada or 303-397-7956 Worl.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AWS D18.2:2009An American National StandardAbstractThis standard addresses factors that affect weld discoloration on the inside of austenitic stainless steel tube. The documentcontains a color illustration relating the discoloration to the oxygen content of the backing shielding gas.Guide to Weld Di

2、scoloration Levels onInside of Austenitic Stainless Steel Tube1. This standard provides a visual comparison guide that can be used to specify surface discoloration criteria for sanitary(hygienic) welds in austenitic stainless steel tube.This figure has been extracted from AWS D18.1/D18.1M:2009.2. Th

3、e Tube Sample. The tube sample was prepared using an automatic orbital “bead-on-plate” weld on the outsidediameter of a 2 in 50.8 mm stainless steel tube. The weld penetrated through the tube wall. The concentration of oxygenin ppm added to the pure argon backing gas for each weld was as follows:No.

4、 110 ppm No. 350 ppm No. 5200 ppm No. 71000 ppm No. 912 500 ppmNo. 225 ppm No. 4100 ppm No. 6500 ppm No. 85000 ppm No. 1025 000 ppm3. The illustration is most useful as a reference to identify the degree of discoloration rather than to specify oxygenlimits in the backing gas. The amount of discolora

5、tion and its appearance can be influenced by factors other than oxygensuch as:High levels of moisture in the backing gas will increase the degree of discoloration.Contaminants such as hydrocarbons, moisture, and some types of particulate on the surface prior to welding caninfluence discoloration lev

6、els.Hydrogen gas in the argon backing gas can significantly reduce the amount of discoloration.The metals surface finish can affect the appearance of discoloration.No portion of this standard may be reproduced, stored in a retrieval system, or transmitted in any form, including mechanical, photo-cop

7、ying, recording, or otherwise, without the prior written permission of the copyright owner.Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube550 N.W. LeJeune Road, Miami, FL 33126Statement on the Use of AWS American National Standard StandardsAll standards (codes, specifications,

8、 recommended practices, methods, classifications, and guides) of the American Welding Society (AWS)are voluntary consensus standards that have been developed in accordance with the rules of the American National Standards Institute(ANSI). When AWS American National Standards are either incorporated

9、in, or made part of, documents that are included in federal or statelaws and regulations, or the regulations of other governmental bodies, their provisions carry the full legal authority of the statute. In suchcases, any changes in those AWS standards must be approved by the governmental body having

10、 statutory jurisdiction before they can becomea part of those laws and regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokesthe AWS standards. Where this contractual relationship exists, changes in or deviations from requirements of

11、an AWS standard must be byagreement between the contracting parties.International Standard Book Number: 978-0-87171-756-6American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126 2009 by American Welding Society. All rights reserved.Printed in the United States of AmericaAWS American National

12、 Standards are developed through a consensus standards development process that brings together volunteers repre-senting varied viewpoints and interests to achieve consensus. While the AWS administers the process and establishes rules to promote fairnessin the development of consensus, it does not i

13、ndependently test, evaluate, or verify the accuracy of any information or the soundness of anyjudgments contained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whether special, indirect, con-sequential, or compensatory,

14、directly or indirectly resulting from the publication, use of, or reliance on this standard. AWS also makes noguarantee or warranty as to the accuracy or completeness of any information published herein.In issuing and making this standard available, AWS is neither undertaking to render professional

15、or other services for or on behalf of any per-son or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someone else. Anyone using these documentsshould rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in dete

16、rmining the exer-cise of reasonable care in any given circumstances. It is assumed that the use of this standard and its provisions are entrusted to appropriatelyqualified and competent personnel.This standard may be superseded by the issuance of new editions. Users should ensure that they have the

17、latest edition.Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard accept any and all liabilitiesfor infringement of any patent or trade name items. AWS disclaims liability for the infringement of any patent or product trade name resulting

18、from the use of this standard.Finally, the AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errata, when discovered, are posted on the AWS web page(www.

19、aws.org).Official interpretations of any of the technical requirements of this standard may only be obtained by sending a request, in writing, to theappropriate technical committee. Such requests should be addressed to the American Welding Society, Attention: Managing Director, TechnicalServices Div

20、ision, 550 N.W. LeJeune Road, Miami, FL 33126. With regard to technical inquiries made concerning AWS standards, oral opinionson AWS standards may be rendered. These opinions are offered solely as a convenience to users of this standard, and they do not constituteprofessional advice. Such opinions r

21、epresent only the personal opinions of the particular individuals giving them. These individuals do notspeak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations of AWS. In addition, oral opinionsare informal and should not be used as a substitut

22、e for an official interpretation.This standard is subject to revision at any time by the AWS D18 Committee on Welding in Sanitary Applications. It must be reviewed everyfive years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions, or deletions) and

23、any pertinentdata that may be of use in improving this standard are required and should be addressed to AWS Headquarters. Such comments will receivecareful consideration by the AWS D18 Committee on Welding in Sanitary Applications and the author of the comments will be informed ofthe Committees resp

24、onse to the comments. Guests are invited to attend all meetings of the AWS D18 Committee on Welding in SanitaryApplications to express their comments verbally. Procedures for appeal of an adverse decision concerning all such comments are provided inthe Rules of Operation of the Technical Activities

25、Committee. A copy of these Rules can be obtained from the American Welding Society,550 N.W. LeJeune Road, Miami, FL 33126.AWS D18 Committee on Welding in Sanitary ApplicationsJ. E. Campbell, Chair WeldTech Solutions CorporationW. L. Roth, 1st Vice Chair Procter & Gamble, IncorporatedR. Howard, 2nd V

26、ice Chair Vogt Power InternationalR. Starks, Secretary American Welding SocietyR. E. Avery Nickel InstituteR. D. Campbell Bechtel National, IncorporatedL. Hanson Johnsonville Sausage, LLCB. K. Henon Arc Machines IncorporatedE. K. Johnson SWECO Division of M-I LLCJ. McSwiggin Rodem, IncorporatedJ. Williams James Williams, PC Advisors to the AWS D18 Committee on Welding in Sanitary ApplicationsL. P. Connor ConsultantJ. R. Hannahs ProfessorM. P. Lang United Association Local 501G. B. Melton TWIJ. R. Miller RetiredR. K. Smith Richard K. Smith