ANSI American Society of Safety Engineers A10.23-2014 Safety Requirements for the Installation of Drilled Shafts.pdf

《ANSI American Society of Safety Engineers A10.23-2014 Safety Requirements for the Installation of Drilled Shafts.pdf》由会员分享，可在线阅读，更多相关《ANSI American Society of Safety Engineers A10.23-2014 Safety Requirements for the Installation of Drilled Shafts.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、AmericAn n Ation Al St And Ard ANSI/ASSE A10.23 2014 Safety Requirements for the Installation of Drilled Shafts American National Standard for Construction and Demolition Operations AmericAn Society of SAfety e ngineerS ANSI/ASSE A10.23 2014 ANSI/ASSE A10.23 2014 The information and materials contai

2、ned in this publication have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept no legal responsibility for the correctness or completeness of this ma

3、terial or its application to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property. ANSI ANSI/ASSE A10.23 2014 American National Standard C

4、onstruction and Demolition Operations Safety Requirements for the Installation of Drilled Shafts Secretariat American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 Approved: January 31, 2014 American National Standards Institute, Inc. Approval of an American Na

5、tional Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by di

6、rectly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards i

7、s completely voluntary; their existence does not in any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does no

8、t develop standards and will in no circumstance give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpret

9、ation should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodicall

10、y to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published March 2014 by: American Society of Safety Engineers 1800 East Oakton Street Des Plai

11、nes, Illinois 60018-2187 (847) 699-2929 www.asse.org Copyright 2014 by the American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Print

12、ed in the United States of America American National Standard Foreword (This Foreword is not a part of American National Standard A10.23-2014.) This standard is one of a series of safety standards that have been formulated by the Accredited Standards Committee on Safety in Construction and Demolitio

13、n Operations, A10. It is expected that the standards in the A10 series will find a major application in industry, serving as a guide to contractors, labor, and equipment manufacturers. For the convenience of users, a list of existing and proposed standards in the A10 series for Safety Requirements i

14、n Construction and Demolition Operations follows. A10.1 Pre-Project & Pre-Task Safety & Health Planning A10.2 Safety, Health and Environmental Training (under development) A10.3 Powder-Actuated Fastening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists A10.6 Demolition Ope

15、rations A10.7 Transportation, Storage, Handling and Use of Commercial Explosives and Blasting Agents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Portable Space Heating Devices A10.11 Personnel and Debris Nets A10.12 Excavation A10.13 Steel Erection A10.15 Dredging

16、A10.16 Tunnels, Shafts and Caissons A10.17 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction A10.18 Temporary Roof and Floor Holes, Wall Openings, Stairways and Other Unprotected Edges A10.19 Pile Installation and Extraction Operations A10.20 Ceramic Tile, Terrazzo, and Marble Work A10

17、.21 Safe Construction and Demolition of Wind Generation/Turbine Facilities (under development) A10.22 Rope-Guided and Non-Guided Workers Hoists A10.23 Safety Requirements for the Installation of Drilled Shafts A10.24 Roofing Safety Requirements for Low-Sloped Roofs A10.25 Sanitation in Construction

18、A10.26 Emergency Procedures for Construction Sites A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial Platforms in Construction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Protection Used in Construction and Demolition Operatio

19、ns A10.33 Safety and Health Program Requirements for Multi-Employer Projects A10.34 Public Protection A10.37 Debris Nets A10.38 Basic Elements of a Program to Provide a Safe and Healthful Work Environment A10.39 Construction Safety and Health Audit Program A10.40 Reduction of Musculoskeletal Problem

20、s in Construction A10.41 Equipment Operator and Supervisor Qualifications and Responsibilities (under development) A10.42 Rigging Qualifications and Responsibilities in the Construction Industry A10.43 Confined Spaces in Construction (under development) A10.44 Lockout/Tagout in Construction A10.46 H

21、earing Loss Prevention A10.47 Highway Construction Safety A10.48 Communication Tower Erection (under development) A10.49 Control of Health Hazards (under development) One purpose of these standards is to serve as guides to governmental authorities having jurisdiction over subjects within the scope o

22、f the A10 Committee standards. If these standards are adopted for governmental use, the reference of other national codes or standards in individual volumes may be changed to refer to the corresponding regulations. Revisions: The A10 Committee welcomes proposals for revisions to this standard. Revis

23、ions are made to the standard periodically (usually five years from the date of the standard) to incorporate changes that appear necessary or desirable, as demonstrated by experience gained from the application of the standard. Proposals should be as specific as possible, citing the relevant section

24、 number(s), the proposed wording, and the reason for the proposal. Pertinent documentation would enable the A10 Committee to process the changes in a more-timely manner. Interpretations: Upon a request in writing to the Secretariat, the A10 Committee will render an interpretation of any requirement

25、of the standard. The request for interpretation should be clear, citing the relevant section number(s) and phrased as a request for a clarification of a specific requirement. Oral interpretations are not provided. No one but the A10 Committee (through the A10 Secretariat) is authorized to provide an

26、y interpretation of this standard. Approval: Neither the A10 Committee nor American National Standards Institute (ANSI) approves, certifies, rates or endorses any item, construction, proprietary device or activity. Appendices: Appendices are included in most standards to provide the user with additi

27、onal information related to the subject of the standard. Appendices are not part of the approved standard. Checklists: Checklists included in A10 standards may be copied and used in non- commercial settings only. Committee Meetings: The A10 Committee meets twice a year. Persons wishing to attend a m

28、eeting should contact the Secretariat for information. Standard Approval: This standard was processed and approved for submittal to ANSI by the American National Standards Committee on Safety in Construction and Demolition Operations, A10. Approval of the standard does not necessarily imply (nor is

29、it required) that all Committee members voted for its approval. At the time this standard was approved, the A10 Committee had the following members: Richard King, CSP, Chairman James Tomaseski, Vice Chairman Timothy R. Fisher, CSP, CHMM, ARM, CPEA, Secretary Jennie Dalesandro, Administrative Technic

30、al Support Organization Represented Name of Representative Accident Prevention Corporation Frank Burg, CSP, P.E. Terry Krug, CSP, CIH Alstom Power Robert Renney Ted P. Sharp American Insurance Services Group Thad Nosal James G. Borchardt, CSP, CPE, CRIS ASCE - Construction Institute Committee Willia

31、m R. Nash, P.E. Harlan Fair American Society of Safety Engineers Ken Shorter, CSP, ARM, TCDS A. David Brayton, CSP, CPC American Wind Energy Association Michele Myers Mihelic American Work Platform Training, Inc. Dennis W. Eckstine Associated Builders and Contractors, Inc. Ralph Riley Chris Williams

32、 Associated General Contractors of America, The Michael McCaffrey Kevin Cannon Association of Union Constructors, The Wayne Creasap, II Rusty Brown, CSP A-Z Safety Resources, Inc. Jane F. Williams, CPEA, CCA Barton-Malow Company Mark Klimbal, CSP, ARM Clayton Shafer Black & Veatch Richard F. King, C

33、SP John H. Johnson, CSP Building & Construction Trades Department Pete Stafford Jim Platner, Ph.D., CIH CPWR - Center for Construction Research & Training Chris Trahan, CIH Pete Stafford Capital Safety Group Scott C. Casebolt J. Thomas Wolner, P.E. Clark Construction Group Tim Sirofchuck, CSP Kurt D

34、unmire, CSP, CHST Cole-Preferred Safety Consulting, Inc. Barry Cole Philip L. Colleran Philip L. Colleran, CSP Construction & Realty Safety Group, Inc. Ron Lattanzio Frank Marino ECI Safety Services Co. Anthony Merisola Patrick Brennan, CSHM, CSSM Edison Electric Institute R. Lee Reed, Jr. Charles K

35、elly E. I. Dupont de Nemours & Company Gary Birchall Ronald Probasco, CSP Elevator Industry Preservation Fund Garry Kosinski Michael D. Morand Ellis Fall Safety Solutions J. Nigel Ellis, Ph.D., P.E., CSP, CPE John Whitty, P.E. Gilbane Building Co. Anthony ODea, CSP, CHST Charles Praul, Jr., CSP Rich

36、ard D. Hislop Richard Hislop Shawn Bradfield Independent Electrical Contractors, Inc. John P. Masarick Bob Baird Institute of Makers of Explosives Lon D. Santis Susan JP Flanagan Insulators International Union Terry Lynch Jim E. Lapping, MS, P.E., CSP International Association of Bridge, Structural,

37、 Ornamental and Reinforcing Iron Workers Steven Rank Robert Migliaccio, Sr. International Brotherhood of Boilermakers Brian Loftus Bridget Connors International Brotherhood of Electrical Workers James Tomaseski International Brotherhood of Teamsters LaMont Byrd, CIH Julie Plavka, CIH International S

38、afety Equipment Association Cristine Fargo International Union of Bricklayers & Allied Craftworkers Michael Kassman, CHST Gerard Scarano International Union of Operating Engineers Barbara McCabe Steve Brown Jack L. Mickle & Associates Jack Mickle, Ph.D., P.E. Steve Stock, P.E., PLS Laborers Internat

39、ional Union of North America Scott Schneider, MS, CIH Walter A. Jones, MS, CIH Lend Lease Joel C. Pickering Michael Lentz Marsh USA, Inc. Timothy Bergeron, CSP Maryland Occupational Safety & Health Mischelle Vanreusel Eric Uttenreither Mechanical Contractors Association of America Peter Chaney, MS,

40、CSP Dennis Langley National Association of Home Builders Robert Matuga Dylan Hardison National Association of Railroad Safety Consultants & Investigators Lewis Barbe, P.E., CSP, CRSP National Electrical Contractors Association Michael J. Johnston National Institute for Occupational Safety & Health T

41、homas G. Bobick, Ph.D., P.E., CSP, CPE Matt Gillen, CIH National Railroad Contractors & Maintenance Association Jeffrey D. Meddin, CSP, CHEP, CHCM National Roofing Contractors Association Harry Dietz Tom Shanahan National Society of Professional Engineers E. Ross Curtis, P.E., DFE Paul Swanson, P.E.

42、 Operative Plasterers and Cement Masons International Association Deven Johnson Daniel M. Paine Daniel M. Paine Barbara Paine Phoenix Fabricators and Erectors, Inc. Robert E. Clouse, CSP, CHST Donald Hendrix Powder Actuated Tool Manufacturers Institute James A. Borchers David Jablonski Power Consult

43、ants, Incorporated David Goldsmith Camille Villanova Professional Safety Consultants, Inc. Jim E. Lapping, MS, P.E., CSP Anthony Brown Property Casualty Insurers Association of America John Rabovsky, MS, CSP, ARM Daniel Lavoie, CSP, ARM Ryland Group, Inc., The Bob Masterson, CSP Scaffolding, Shoring

44、 & Forming Institute Chris Johnson Shafer Safety Solutions, LLC Carmen Shafer, CSP, CHST, CRIS Sheet Metal & Air Conditioning Contractors National Association Mike McCullion, CSP, ARM Joe Visgaitis Sheet Metal Workers International Association Charles Austin, MS SPA, Incorporated Stanley Pulz, CSP,

45、P.E. Richard B. Loucks, Ph.D., P.E. Turner Construction Company Cindy L. DePrater, ALCM Paul Huntley United Association of Plumbers and Pipefitters Laurie Shadrick Bruce Dantley United Brotherhood of Carpenters and Joiners of America William Irwin Thomas L. Kavicky United Union of Roofers, Waterproo

46、fers and Allied Workers John Barnhard U.S. Department of the Army Corps of Engineers Brian Becker, MS Ellen B. Stewart, CSP U.S. Department of Energy Leslie Bermudez Joseph Hopkins West Virginia University Extension Service Brandon Takacs, CSHM Mark Fullen, Ed.D., CSP Winchester Homes Inc. Thomas Tr

47、auger Larry Freiert ZBD Constructors (Zurn Industries) Greg Thompson, CSP Jeffrey D. Meddin, CSP, CHEP, CHCM Independent Experts & Observers: Fluor Corporation Michael Weatherred, CSP Craig Clairmont, CIH Lamar Advertising Chuck Wigger, CSP Micky Vint Par Electrical Contractors Steven T. Theis Lee B

48、oulanger Subgroup A10.23 had the following members: Philip L. Colleran, CSP, Chair Jerry Rivera (Liaison) Michael Blanchard, CSP, ALCM, ARM David Grafton Robert Graswick Greg Lewis Richard Marshall, CHST Colin Perkins John Roma Marshall “Bo” Walker Contents SECTION PAGE 1. Scope, Purpose, Applicatio

49、n and Exceptions . 10 1.1 Scope 10 1.2 Purpose . 10 1.3 Application . 10 1.4 Exceptions . 10 2. References 10 2.1 Referenced American National Standards 10 2.2 Additional References . 10 3. Definitions 11 4. Site-Specific Safety Plan . 13 5. Site Investigation . 13 6. Site Conditions 13 7. Drilling Equipment Selection . 14 8. Delivery and Storage of Reinforcing Steel and Casing . 14 9. Materials Handling to Points of Final Use . 14 10. Power Equipment 15 11. Pressurized Lines and Hoses . 15 12. Specific Drilled Shaft Installation Equipment Requirements . 16 13. Fall Protec