AIR FORCE A-A-59417 B-2010 THERMAL IMAGING SYSTEM《热成像系统》.pdf

《AIR FORCE A-A-59417 B-2010 THERMAL IMAGING SYSTEM《热成像系统》.pdf》由会员分享，可在线阅读，更多相关《AIR FORCE A-A-59417 B-2010 THERMAL IMAGING SYSTEM《热成像系统》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 FSC 5855 Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any other data that may improve this document should be sent to FSC: 5855 - WR-ALC/LEEE, 420 Second Street, Suite 100, Robins AFB, GA 31098-1813. Since contact information can change, you may want to verif

2、y the currency of this address information using the ASSIST Online database at https:/assist.daps.dla.mil/online/. A-A-59417B 2 July 2010 SUPERSEDING A-A-59417A 6 September 2005 COMMERCIAL ITEM DESCRIPTION THERMAL IMAGING SYSTEM The General Services Administration has authorized the use of this comm

3、ercial item description (CID), for all federal agencies. 1. Scope. This Commercial Item Description (CID), describes a portable Thermal Imaging System (TIS). This CID is intended as a minimum requirement for the Thermal Imaging System in which only those manufacturers that meet or surpass the follow

4、ing requirements are supplied per this CID. 2. SALIENT CHARACTERISTICS. 2.1 Performance. The TIS shall be waterproof and must be capable of operating in temperatures up to 500 degrees Fahrenheit for short periods of time (5 minutes minimum). The TIS shall have a liquid crystal display (LCD) for easy

5、 viewing. The TIS shall be capable of detecting individuals, hot spots, and electrical systems. The TIS shall allow personnel using it the ability to see through smoke, fog, or any other low visibility condition. The TIS shall have the capability of transmitting information to a remote location. The

6、 TIS shall capture a field of view between 50 and 60 degrees. The TIS shall have an ergonomic and durable design. The TIS must remain fully operational if it exposed to dust, immersed in a minimum of 1 foot of water, exposed to high temperatures (up to 500 degrees Fahrenheit for a minimum of 5 minut

7、es) or if it is dropped from a height of 3 feet. The LCD should maintain a clear resolution when subjected to the aforementioned circumstances. 2.2 Operation. The control buttons on the TIS should be easy to access. All features necessary for operation should be clearly marked. The TIS shall be easi

8、ly operated by the user while wearing full fire fighting gear. The TIS should not require more than one person for operation and shall be capable of being easily operated in any position. 2.3 Liquid Crystal Display (LCD). The TIS shall have a glare free LCD color display with a minimum screen size o

9、f 3.5 inches diagonal, for easy viewing of images. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59417B 2 2.4 Electrical Power Source. The TIS shall operate off of a nickel metal hydride rechargeable battery. The rechargeable battery

10、 needs to supply the TIS power for a minimum operating time of 1.5 hours. The TIS shall be supplied with an extra rechargeable battery. The TIS shall be supplied with a low battery indicator. 2.5 Dimensions and Weight. The size of the equipment shall be consistent with current commercial capabilitie

11、s. The TIS, with battery, shall weigh no more than 10 pounds. 2.6 Durability. The TIS shall have a sturdy design. The TIS shall meet all operational requirements if it is exposed to water, dust, high temperatures, or if it is dropped from a height of 3 feet. 2.7 Carrying/Storage. The TIS shall be su

12、pplied with a waterproof carrying/storage case that can withstand high temperatures. The TIS carrying/storage case shall be capable of storing the entire system (imager, charger, extra battery or battery case, carrying strap, owners manual, etc.). The TIS shall be supplied with a removable carrying

13、strap. 3. REGULATORY REQUIREMENTS. 3.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, an

14、d promotes economically advantageous life cycle costs. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 3.2 Green Procurement Program. Green Procurement Program (GPP) is

15、 a mandatory federal acquisition program that focuses on the purchase and use of environmentally preferable products and services. GPP requirements apply to all acquisitions using appropriated funds, including services and new requirements. FAR 23.404(b) applies and states the GPP requires 100% of E

16、PA designated product purchase that are included in the Comprehensive Procurement Guidelines list that contains recovered materials, unless the item cannot be acquired: a) competitively within a reasonable timeframe; b) meet appropriate performance standards, or c) at a reasonable price. The prime c

17、ontractor is responsible for ensuring that all subcontractors comply with this requirement. 4.0 PRODUCT CONFORMANCE PROVISIONS 4.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards and quali

18、ty assurance practices, and be the same product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance. 5. PACKAGING. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59417B 3 5.1 Pre

19、servation, packing, and marking. Preservation, packing, and marking shall be as specified in the contract or order. 6. NOTES 6.1 Source of documents. 6.1.1 FAR may be obtained from the Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954. Electronic copies of the FAR may be obtain

20、ed from https:/www.acquisition.gov/far/ . 6.2 Known NSNs. NSN 5855-01-485-3429 NSN 5855-01-537-4951 6.3 Ordering data. The contract or order should specify the following: a. CID document number, revision, and CID PIN. b. Product conformance provisions. c. Packaging requirements. 6.4 Key Words Low vi

21、sibility conditions Portable Waterproof MILITARY INTERESTS: Custodians: Preparing Activity: Air Force 84 Air Force 84 Reviewers: Agent: Air Force 99 Air Force 99 (Project 5855-2010-001) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/online/ . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-