IEEE 1450-2007 en Standard Test Interface Language (STIL) for Digital Test Vector Data (IEEE Computer Society)《数字试验向量的标准界面试验语言(STIL)》.pdf

《IEEE 1450-2007 en Standard Test Interface Language (STIL) for Digital Test Vector Data (IEEE Computer Society)《数字试验向量的标准界面试验语言(STIL)》.pdf》由会员分享，可在线阅读，更多相关《IEEE 1450-2007 en Standard Test Interface Language (STIL) for Digital Test Vector Data (IEEE Computer Society)《数字试验向量的标准界面试验语言(STIL)》.pdf（148页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62525Edition 1.0 2007-11INTERNATIONAL STANDARD Standard Test Interface Language (STIL) for Digital Test Vector Data IEC 62525:2007(E)IEEE Std.1450-1999 IEEE 1450THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEEE All rights reserved. IEEE is a registered trademark in the U.S. Patent 19.

2、080 PRICE CODEISBN 2-8318-9337-2IEEE 14501. Overview.101.1 Scope.121.2 Purpose132. References.133. Definitions, acronyms, and abbreviations.133.1 Definitions.133.2 Acronyms and abbreviations.164. Structure of this standard 165. STIL orientation and capabilities tutorial (informative).175.1 Hello Tes

3、ter.175.2 Basic LS245. 225.3 STIL timing expressions/”Spec” information 265.4 Structural test (scan) 315.5 Advanced scan . 355.6 IEEE Std 1149.1-1990 scan . 415.7 Multiple data elements per test cycle. 465.8 Pattern reuse/direct access test. 505.9 Event data/non-cyclized STIL information . 546. STIL

4、 syntax description. 646.1 Case sensitivity 646.2 Whitespace. 646.3 Reserved words 646.4 Reserved characters . 666.5 Comments 676.6 Token length 676.7 Character strings 676.8 User-defined name characteristics . 686.9 Domain names . 686.10 Signal and group name characteristics.696.11 Timing name cons

5、tructs. 696.12 Number characteristics. 696.13 Timing expressions and units (time_expr). 706.14 Signal expressions (sigref_expr) 726.15 WaveformChar characteristics. 736.16 STIL name spaces and name resolution. 747. Statement structure and organization of STIL information . 767.1 Top-level statements

6、 and required ordering 687.2 Optional top-level statements 707.3 STIL files . 70Published by IEC under licence from IEEE. 1999 IEEE. All rights reserved.IEEE Introduction .9FOREWORD 6IEC 62525:2007(E)IEEE 1450-1999(E) 2 CONTENTS8. STIL statement. 798.1 STIL syntax 798.2 STIL example. 799. Header blo

7、ck 809.1 Header block syntax. 809.2 Header example . 8010. Include statement . 8010.1 Include statement syntax 8110.2 Include example. 8110.3 File path resolution with absolute path notation 8110.4 File path resolution with relative path notation . 8111. UserKeywords statement . 8211.1 UserKeywords

8、statement syntax 8211.2 UserKeywords example. 8212. UserFunctions statement 8212.1 UserFunctions statement syntax 8312.2 UserFunctions example 8313. Ann statement 8313.1 Annotations statement syntax 8313.2 Annotations example . 8314. Signals block 8314.1 Signals block syntax 8414.2 Signals block exa

9、mple . 8615. SignalGroups block 8615.1 SignalGroups block syntax 8615.2 SignalGroups block example . 8715.3 Default attribute values 8715.4 Translation of based data into WaveformChar characters. 8816. PatternExec block 8916.1 PatternExec block syntax. 9016.2 PatternExec block example 9017. PatternB

10、urst block 9017.1 PatternBurst block syntax 9117.2 PatternBurst block example . 92Published by IEC under licence from IEEE. 1999 IEEE. All rights reserved.IEC 62525:2007(E)IEEE 1450-1999(E) 3 18. Timing block and WaveformTable block 9218.1 Timing and WaveformTable syntax 9318.2 Waveform event defini

11、tions. 9618.3 Timing and WaveformTable example . 9818.4 Rules for timed event ordering and waveform creation. 9918.5 Rules for waveform inheritance. 10219. Spec and Selector blocks 10319.1 Spec and Selector block syntax.10319.2 Spec and Selector block example .10520. ScanStructures block.10620.1 Sca

12、nStructures block syntax .10720.2 ScanStructures block example 10821. STIL Pattern data . 10921.1 Cyclized data 10921.2 Multiple-bit cyclized data 11021.3 Non-cyclized data 11121.4 Scan data 11121.5 Pattern labels 11222. STIL Pattern statements. 11222.1 Vector (V) statement 11222.2 WaveformTable (W)

13、 statement 11322.3 Condition (C) statement. 11322.4 Call statement. 11422.5 Macro statement. 11422.6 Loop statement. 11522.7 MatchLoop statement. 11522.8 Goto statement . 11622.9 BreakPoint statements 11622.10 IDDQTestPoint statement 11622.11 Stop statement 11722.12 ScanChain statement 11723. Patter

14、n block 11723.1 Pattern block syntax. 11723.2 Pattern initialization. 11823.3 Pattern examples 11824. Procedures and MacroDefs blocks. 11824.1 Procedures block 11924.2 Procedures example . 12024.3 MacroDefs block 12024.4 Scan testing 12024.5 Procedure and Macro Data substitution. 121Published by IEC

15、 under licence from IEEE. 1999 IEEE. All rights reserved.IEC 62525:2007(E)IEEE 1450-1999(E) 4 Annex A (informative) Glossary . 125Annex B (informative) STIL data model. 126Annex C (informative) GNU GZIP reference . 131Annex D (informative) Binary STIL data format 132Annex E (informative) LS245 desig

16、n description 136Annex F (informative) STIL FAQs and language design decisions 138Annex G (informative) List of participants 142 Published by IEC under licence from IEEE. 1999 IEEE. All rights reserved.IEC 62525:2007(E)IEEE 1450-1999(E) 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _STANDARD TEST INTE

17、RFACE LANGUAGE (STIL)FOR DIGITAL TEST VECTOR DATAFOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation o

18、n all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC P

19、ublication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation

20、. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus o

21、f opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are mad

22、e to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transpa

23、rently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be r

24、endered responsible for any equipment declared to be in conformity with an IEC Publication. 6) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

25、 International Standard IEC/IEEE 62525 has been processed through Technical Committee 93: Design automation. The text of this standard is based on the following documents: IEEE Std FDIS Report on voting 1450(1999) 93/247/FDIS 93/258/RVD Full information on the voting for the approval of this standar

26、d can be found in the report on voting indicated in the above table. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At

27、 this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. Published by IEC under licence from IEEE. 1999 IEEE. All rights reserved.IEC 62525:2007(E)IEEE 1450-1999(E) 6 Published by IEC under licence from IEEE. 1999 IEEE. All rights reserved. IEC/IEEE Dual

28、 Logo International StandardsThis Dual Logo International Standard is the result of an agreement between the IEC and the Institute of Electrical and Electronics Engineers, Inc. (IEEE). The original IEEE Standard was submitted to the IEC for consideration under the agreement, and the resulting IEC/IE

29、EE Dual Logo International Standard has been published in accordance with the ISO/IEC Directives. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards th

30、rough a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the

31、IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of an IEC/IEEE Dual Logo International Standard is wholly volu

32、ntary. The IEC and IEEE disclaim liability for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEC or IEEE Standard d

33、ocument. The IEC and IEEE do not warrant or represent the accuracy or content of the material contained herein, and expressly disclaim any express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herei

34、n is free from patent infringement. IEC/IEEE Dual Logo International Standards documents are supplied “AS IS”. The existence of an IEC/IEEE Dual Logo International Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services re

35、lated to the scope of the IEC/IEEE Dual Logo International Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standar

36、d is subjected to review at least every five years for revision or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cauti

37、oned to check to determine that they have the latest edition of any IEEE Standard. In publishing and making this document available, the IEC and IEEE are not suggesting or rendering professional or other services for, or on behalf of, any person or entity. Neither the IEC nor IEEE is undertaking to

38、perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEC/IEEE Dual Logo International Standards or IEEE Standards document, should rely upon the advice of a competent professional in determining the exercise of reasonable care in any given circumst

39、ances. Interpretations Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Stand

40、ards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response t

41、o interpretation requests except in those cases where the matter has previously received formal consideration. Comments for revision of IEC/IEEE Dual Logo International Standards are welcome from any interested party, regardless of membership affiliation with the IEC or IEEE. Suggestions for changes

42、 in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE-SA Standards Board, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331, USA and/or Gene

43、ral Secretary, IEC, 3, rue de Varemb, PO Box 131, 1211 Geneva 20, Switzerland. Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright

44、 Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through

45、the Copyright Clearance Center. NOTE Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connect

46、ion therewith. The IEEE shall not be responsible for identifying patents for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. IEC 62525:2007(E)IEEE 1450-1999(E) 7 IEEE StandardTest Int

47、erface Language (STIL) for DigitalTestVector DataSponsorTest Technology Standards Committeeof theIEEE Computer SocietyApproved 18 March 1999IEEE-SA Standards BoardAbstract: Standard Test Interface Language (STIL) provides an interface between digital test gen-eration tools and test equipment. A test

48、 description language is defined that: (a) facilitates the trans-fer of digital test vector data from CAE to ATE environments; (b) specifies pattern, format, andtiming information sufficient to define the application of digital test vectors to a DUT; and (c) sup-ports the volume of test vector data

49、generated from structured tests.Keywords: automatic test pattern generator (ATPG), built-in self-test (BIST), computer-aided en-gineering (CAE), cyclize, device under test (DUT), digital test vectors, event, functional vectors, pat-tern, scan vectors, signal, structural vectors, timed event, waveform, waveshapePublished by IEC under licence from IEEE. 1999 IEEE. All rights reserved.IEC 62525:2007(E)IEEE 1450-1999(E) 8 Standard Test Interface Language (STIL) was initially developed by an ad-hoc consortium of test equipmentvendors, compute