IEC 61996-2-2007 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2 Simplified voyage data recorder (S-VDR) - Performa.pdf

《IEC 61996-2-2007 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2 Simplified voyage data recorder (S-VDR) - Performa.pdf》由会员分享，可在线阅读，更多相关《IEC 61996-2-2007 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2 Simplified voyage data recorder (S-VDR) - Performa.pdf（64页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61996-2 Edition 2.0 2007-11 INTERNATIONAL STANDARD Maritime navigation and radiocommunication equipment and systems Shipborne voyage data recorder (VDR) Part 2: Simplified voyage data recorder (S-VDR) Performance requirements, methods of testing and required test results IEC 61996-2:2007(E) THI

2、S PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in w

3、riting from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further i

4、nformation. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic an

5、d related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on

6、-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published de

7、tails twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additio

8、nal languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch T

9、el.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61996-2 Edition 2.0 2007-11 INTERNATIONAL STANDARD Maritime navigation and radiocommunication equipment and systems Shipborne voyage data recorder (VDR) Part 2: Simplified voyage data recorder (S-VDR) Performance requirements, methods of testing and re

10、quired test results INTERNATIONAL ELECTROTECHNICAL COMMISSION XA ICS 47.020.70 PRICE CODE ISBN 2-8318-9356-9 2 61996-2 IEC:2007(E) CONTENTS FOREWORD.5 INTRODUCTION.7 1 Scope.8 2 Normative references .8 3 Terms, definitions and abbreviations 9 3.1 Definitions.9 3.2 Abbreviations 10 4 Performance requ

11、irements .11 4.1 General .11 4.2 Purpose 12 4.3 Operational requirements 12 4.3.1 Design and construction 12 4.3.2 Maintenance of sequential records 12 4.3.3 Co-relation in date and time.12 4.3.4 Protective capsule .12 4.3.5 Assessment of recording medium 13 4.3.6 Interfaces 14 4.4 Data selection an

12、d security .14 4.4.1 Selection of data items 14 4.4.2 Configuration data .14 4.4.3 Resistance to tampering 15 4.4.4 Recording integrity 15 4.5 Continuity of operation 15 4.5.1 Operation 15 4.5.2 Power source 16 4.5.3 Dedicated reserve power source16 4.5.4 Recording period and duration.16 4.6 Data it

13、ems to be recorded .16 4.6.1 Date and time16 4.6.2 Ships position.17 4.6.3 Speed17 4.6.4 Heading.17 4.6.5 Bridge audio17 4.6.6 Communications audio 17 4.6.7 Radar data post-display selection.17 4.6.8 AIS18 4.6.9 Other items18 4.6.10 Echo sounder 18 4.6.11 Main alarms.18 4.6.12 Rudder order and respo

14、nse .18 4.6.13 Engine order and response18 4.6.14 Hull openings (doors) status 18 4.6.15 Watertight and fire door status.19 4.6.16 Accelerations and hull stresses .19 4.6.17 Wind speed and direction 19 61996-2 IEC:2007(E) 3 5 Technical characteristics 19 5.1 Co-relation in date and time 19 5.2 Parti

15、cular design requirements for the protective capsule19 5.2.1 Fixed protective capsule19 5.3 Location beacon(s) for the protective capsule20 5.3.1 Device for the location of the fixed capsule20 5.3.2 Device(s) for the location of the float-free capsule .20 5.4 Survivability of recorded data 21 5.4.1

16、Long-term retention under normal conditions.21 5.4.2 Survival following an incident 21 5.5 Information to be included in the manufacturers documentation22 5.5.1 Installation guidelines22 5.5.2 Operation and maintenance manual 22 5.5.3 Information for use by an investigation authority22 5.6 Bridge au

17、dio specifications23 5.6.1 Input interface .23 5.6.2 Reference signal .23 5.6.3 Audio frequency response .23 5.6.4 Quality index .23 5.6.5 Audio noise level signal to noise and distortion.23 5.7 Communications audio 24 5.7.1 Input interfaces24 5.7.2 Reference signal .24 5.7.3 Audio frequency respons

18、e .24 5.7.4 Quality index .24 5.7.5 Audio noise level signal to no signal .24 5.7.6 Audio noise level signal to noise and distortion (SINAD).24 5.8 Radar data post-display selection.24 5.8.1 Input interface .24 5.8.2 Image outputs25 6 Methods of testing and required test results .25 6.1 General .25

19、6.1.1 Definitions .25 6.1.2 Playback equipment 26 6.1.3 Sequence of tests26 6.1.4 Requirements to be checked by inspection only.26 6.1.5 Environmental test conditions for normal operation27 6.1.6 Recording duration 27 6.1.7 Dedicated reserve power source28 6.1.8 Recharging of dedicated reserve power

20、 source .28 6.1.9 Brief interruption of electrical power 28 6.1.10 System integrity.28 6.1.11 Maintenance of sequential records 29 6.1.12 Co-relation in date and time.29 6.1.13 Design and construction of the protective capsule .29 6.1.14 Selection of data items 32 6.1.15 Power source 32 6.2 Data ite

21、ms to be recorded .32 6.2.1 Date/time, ships position, speed and heading .32 4 61996-2 IEC:2007(E) 6.2.2 Bridge audio33 6.2.3 Communications audio 36 6.2.4 Radar data, post-display selection.39 6.2.5 AIS47 6.2.6 Other items48 6.2.7 Interfaces 48 Annex A (normative) IEC 61162 sentence formats .49 Ann

22、ex B (informative) Cross-references between VDR and S-VDR 50 Annex C (normative) Download and playback equipment for investigating authorities 51 Annex D (informative) Mandatory alarms .55 Annex E (informative) Requirement/test cross-references.57 Bibliography59 Figure 1 Test set-up block diagram41

23、Figure 2 Comparison of images .45 Table 1 Bridge audio, signal to noise measurements .35 Table 2 Bridge audio, signal to noise and distortion (SINAD) measurements36 Table 3 Communications audio, signal to no-signal measurements 38 Table 4 Communications audio, signal to noise and distortion (SINAD)

24、measurements 39 Table 5 Intersection colours of test images 1 and 243 Table A.1 References in this standard .49 Table B.1 Subject list and subclauses50 Table D.1 IMO instrument: SOLAS Chapter II-1 .55 Table D.2 IMO instrument: SOLAS Chapter II-2 .56 Table D.3 IMO instrument: Resolution A.48156 Table

25、 E.1 Subject list and subclauses57 61996-2 IEC:2007(E) 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS SHIPBORNE VOYAGE DATA RECORDER (VDR) Part 2: Simplified voyage data recorder (S-VDR) Performance requirements, methods of testing and

26、required test results FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning

27、standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their prep

28、aration is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

29、 with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant

30、subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the techn

31、ical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum exte

32、nt possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for an

33、y equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees

34、 and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8

35、) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rig

36、hts. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61996-2 has been prepared by IEC technical committee 80: Maritime navigation and radiocommunication equipment and systems. This second edition cancels and replaces the first edition publi

37、shed in 2006, and constitutes a technical revision. A new requirement has been added to 4.3.6 for an interface to be used for downloading the stored data to an external computer. This is defined in Annex C which replaces the Annex C of the first edition which contained an IMO Circular which recommen

38、ded such an interface. An optional LAN interface for connection to radar has been added in 5.8. Some corrections to the text have also been made. 6 61996-2 IEC:2007(E) The text of this standard is based on the following documents: CDV Report on voting 80/471/CDV 80/500/RVC Full information on the vo

39、ting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61996 series, under the general title Maritime navigation and radiocommunicati

40、on equipment and systems Shipborne voyage data recorder (VDR), can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to t

41、he specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 61996-2 IEC:2007(E) 7 INTRODUCTION The S-VDR has been introduced by IMO for fitting to existing shi

42、ps as a simplified alternative to the voyage data recorder (VDR) which is required for all new ships. This part of IEC 61996 provides information on the testing requirements for S-VDR as defined in IMO performance standard MSC.163(78). The specification for S-VDR differs significantly from that for

43、VDR in two areas: a) the requirements for monitoring certain sensors are reduced when the data is not provided in IEC 61162 format, and b) the requirements for the protective S-VDR capsule are different from the VDR capsule, both for the fixed and float-free versions. Annex B provides a cross-refere

44、nce between this standard and IEC 61996-1 to aid test houses who may already have test results for VDRs which are being submitted as S-VDRs. Subsequent to publishing the performance standard for S-VDR, MSC.163(78), in 2004, the IMO sub-committee on Safety of Navigation (NAV) discussed the issue of d

45、ownload and playback of information. Recognising that after an accident there is a need for investigators to be able to download the stored data and playback the information from VDRs/S-VDRs without delay, the sub-committee agreed on recommended means for extracting stored data for investigation aut

46、horities. This was adopted by MSC.81 in 2005 as an amendment to resolution MSC.163(78) given in resolution MSC.214(81). This edition of the standard incorporates this amendment. 8 61996-2 IEC:2007(E) MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS SHIPBORNE VOYAGE DATA RECORDER (VDR

47、) Part 2: Simplified voyage data recorder (S-VDR) Performance requirements, methods of testing and required test results 1 Scope This part of IEC 61996 specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for simplified shipborn

48、e voyage data recorders (S-VDRs) as required by IMO MSC.163(78). It takes into account IMO resolution A.694(17) and is associated with IEC 60945. When a requirement in this standard is different from IEC 60945, the requirement in this standard takes precedence. NOTE All text of this standard, whose

49、wording is identical to that of IMO MSC.163(78) or A.861(20) is printed in italics, and the Resolution and associated performance standard paragraph numbers are indicated in brackets. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) ap