IEC 60512-21-1-2010 Connectors for electronic equipment - Tests and measurements - Part 21-1 RF resistance tests - Test 21a RF shunt resistance《电子设备连接器.试验和测量.第21-1部分 RF电阻试验.试验21a RF并联电阻》.pdf

《IEC 60512-21-1-2010 Connectors for electronic equipment - Tests and measurements - Part 21-1 RF resistance tests - Test 21a RF shunt resistance《电子设备连接器.试验和测量.第21-1部分 RF电阻试验.试验21a RF并联电阻》.pdf》由会员分享，可在线阅读，更多相关《IEC 60512-21-1-2010 Connectors for electronic equipment - Tests and measurements - Part 21-1 RF resistance tests - Test 21a RF shunt resistance《电子设备连接器.试验和测量.第21-1部分 RF电阻试验.试验21a RF并联电阻》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60512-21-1Edition 1.0 2010-06INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment Tests and measurements Part 21-1: RF resistance tests Test 21a: RF shunt resistance Connecteurs pour quipements lectroniques Essais et mesures Partie 21-1: Essais de rsistance aux frquenc

2、es radiolectriques Essai 21a: Rsistance parallle aux frquences radiolectriques IEC60512-21-1:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or

3、by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this pu

4、blication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectroniq

5、ue ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs

6、 ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

7、International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catal

8、ogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay

9、up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definition

10、s in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Cust

11、omer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectr

12、onique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/

13、searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/

14、justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il c

15、ontient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner de

16、s commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60512-21-1Edition 1.0 2010-06INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment Tests

17、and measurements Part 21-1: RF resistance tests Test 21a: RF shunt resistance Connecteurs pour quipements lectroniques Essais et mesures Partie 21-1: Essais de rsistance aux frquences radiolectriques Essai 21a: Rsistance parallle aux frquences radiolectriques INTERNATIONAL ELECTROTECHNICAL COMMISSIO

18、N COMMISSION ELECTROTECHNIQUE INTERNATIONALE DICS 31.220.01 PRICE CODECODE PRIXISBN 978-2-88910-954-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60512-21-1 IEC:2010 INTERNATIONAL ELECTROTECHNICAL COMMISSION _

19、CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 21-1: RF resistance tests Test 21a: RF shunt resistance FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Co

20、mmittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Ava

21、ilable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental o

22、rganizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technic

23、al matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC

24、National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformi

25、ty, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC

26、 itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure t

27、hat they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any n

28、ature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referen

29、ced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Internat

30、ional Standard IEC 60512-21-1 has been prepared by subcommittee 48B: Connectors, of IEC technical committee 48: Electromechanical components and mechanical structures for electronic equipment. This standard cancels and replaces Test 21a of IEC 60512-9, issued in 1992. The structure of the IEC 60512

31、series is explained in IEC 60512-1-100. The text of this standard is based on the following documents: FDIS Report on voting 48B/2151/FDIS 48B/2186/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 60512-21-1 IEC:2

32、010 3 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60512 series, under the general title Connectors for electronic equipment Tests and measurements, can be found on the IEC website. The committee has decided that the contents of

33、this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 60512-21-1 IEC:2010

34、CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 21-1: RF resistance tests Test 21a: RF shunt resistance 1 Scope and object This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used

35、 for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to determine the value of RF shunt resistance which degrades the quality factor of an L/C circuit when a connector is connected in parallel. This value is expressed in terms

36、 of a parallel damping resistance. 2 Preparation of the specimen The specimen shall be prepared and mounted according to the detail specification. 3 Test method The R.F. shunt resistance shall be measured with suitable measuring equipment. The measuring points shall be specified in the detail specif

37、ication. The measuring error shall not exceed 10 %. The test frequency shall be specified in the detail specification. The preferred frequencies are: 1 MHz, 10 MHz, 30 MHz and 100 MHz. 4 Requirements The value of RF shunt resistance shall be not less than the value specified in the detail specificat

38、ion. 5 Details to be specified When this test is required by the detail specification, the following details shall be specified: a) preparation and mounting of the specimen; b) measuring points; c) measuring frequency; d) minimum value of RF shunt resistance; e) any deviation from the standard test

39、method. _ 6 60512-21-1 CEI:2010 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ CONNECTEURS POUR QUIPEMENTS LECTRONIQUES ESSAIS ET MESURES Partie 21-1: Essais de rsistance aux frquences radiolectriques Essai 21a: Rsistance parallle aux frquences radiolectriques AVANT-PROPOS 1) La Commission Electrotechn

40、ique Internationale (CEI) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale pour toutes les questions de normalisation dans les domaines de llectricit e

41、t de llectronique. A cet effet, la CEI entre autres activits publie des Normes internationales, des Spcifications techniques, des Rapports techniques, des Spcifications accessibles au public (PAS) et des Guides (ci-aprs dnomms “Publication(s) de la CEI“). Leur laboration est confie des comits dtudes

42、, aux travaux desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent galement aux travaux. La CEI collabore troitement avec lOrganisation Internationale de Normalisation

43、 (ISO), selon des conditions fixes par accord entre les deux organisations. 2) Les dcisions ou accords officiels de la CEI concernant les questions techniques reprsentent, dans la mesure du possible, un accord international sur les sujets tudis, tant donn que les Comits nationaux de la CEI intresss

44、sont reprsents dans chaque comit dtudes. 3) Les Publications de la CEI se prsentent sous la forme de recommandations internationales et sont agres comme telles par les Comits nationaux de la CEI. Tous les efforts raisonnables sont entrepris afin que la CEI sassure de lexactitude du contenu technique

45、 de ses publications; la CEI ne peut pas tre tenue responsable de lventuelle mauvaise utilisation ou interprtation qui en est faite par un quelconque utilisateur final. 4) Dans le but dencourager luniformit internationale, les Comits nationaux de la CEI sengagent, dans toute la mesure possible, appl

46、iquer de faon transparente les Publications de la CEI dans leurs publications nationales et rgionales. Toutes divergences entre toutes Publications de la CEI et toutes publications nationales ou rgionales correspondantes doivent tre indiques en termes clairs dans ces dernires. 5) La CEI elle-mme ne

47、fournit aucune attestation de conformit. Des organismes de certification indpendants fournissent des services dvaluation de conformit et, dans certains secteurs, accdent aux marques de conformit de la CEI. La CEI nest responsable daucun des services effectus par les organismes de certification indpe

48、ndants. 6) Tous les utilisateurs doivent sassurer quils sont en possession de la dernire dition de cette publication. 7) Aucune responsabilit ne doit tre impute la CEI, ses administrateurs, employs, auxiliaires ou mandataires, y compris ses experts particuliers et les membres de ses comits dtudes et des Comits nationaux de la CEI, pour tout prjudice caus en cas de dommages corporels et matriels, ou de tout autre dommage de quelque nature que ce soit, directe ou indirecte, ou pour supporter les cots (y compris les frais de justice) et les dpenses dcou