UL 1363 CRD-2017 UL Standard for Safety Relocatable Power Taps - Section Paragraph Reference 13 8 and 48 24 Subject RPT Employing Tamper Resistant Outlets (Edition 4 October 6 201.pdf

《UL 1363 CRD-2017 UL Standard for Safety Relocatable Power Taps - Section Paragraph Reference 13 8 and 48 24 Subject RPT Employing Tamper Resistant Outlets (Edition 4 October 6 201.pdf》由会员分享，可在线阅读，更多相关《UL 1363 CRD-2017 UL Standard for Safety Relocatable Power Taps - Section Paragraph Reference 13 8 and 48 24 Subject RPT Employing Tamper Resistant Outlets (Edition 4 October 6 201.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared by UL LLC. It is normative for the applicable ULProduct Certification Program(

2、s); however, it is currently not part of the UL Standard(s) referencedbelow.Product Category (CCN): XBYSStandard Number: UL 1363Standard Title: Standard for Relocatable Power TapsEdition Date: October 6, 2014Edition Number: 4Section / Paragraph Reference: 13.8 and 48.24Subject: RPT Employing Tamper

3、Resistant OutletsDECISION:CONSTRUCTION13 Receptacles13.8 A RPT employing tamper-resistant receptacle outlets may be marked TR or Tamper Resistantprovided the receptacle outlets comply with the Tamper-Resistant Receptacle requirements, as specifiedin the Standard for Attachment Plugs and Receptacles,

4、 UL 498.MARKINGS48 Details48.24 A RPT as described by 13.8 shall be marked with the phrase Tamper Resistant or the lettersTR. The letters TR shall be a minimum of 3/16 inch (4.8 mm) in height.RATIONALE FOR DECISION:This CRD identifies the applicable requirements for a RTP employing tamper-resistant

5、outlets which areidentified as either “TR” or “Tamper-Resistant”.Copyright 2017 UL LLCUL LLC, in performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification Requirement Decisions it may issue or that they will be recognized or adoptedby a

6、nyone. Certification Requirement Decisions are the opinion of UL LLC. in practically applying therequirements of the standard. They do not represent formal interpretations of the standard underAmerican National Standards Institute (ANSI) processes. UL LLC shall not be responsible to anyone forthe us

7、e of or reliance upon Certification Requirement Decisions by anyone. UL LLC shall not incur anyobligation or liability for damages, including consequential damages, arising out of or in connection withthe use or reliance upon Certification Requirement Decisions. The electronic version of the Certifi

8、cationRequirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULSTANDARD NUMBER: UL 1363 -2-No Text on This Page