TIA-136-332-2000 TDMA - Third Generation Wireless- Packet Data Service- 136+ Medium Access Control (ANSI APPROVAL WITHDRAWN JUNE 12 2015).pdf

《TIA-136-332-2000 TDMA - Third Generation Wireless- Packet Data Service- 136+ Medium Access Control (ANSI APPROVAL WITHDRAWN JUNE 12 2015).pdf》由会员分享，可在线阅读，更多相关《TIA-136-332-2000 TDMA - Third Generation Wireless- Packet Data Service- 136+ Medium Access Control (ANSI APPROVAL WITHDRAWN JUNE 12 2015).pdf（236页珍藏版）》请在麦多课文档分享上搜索。

1、 ANSI/TIA-136-332-2000 APPROVED: MARCH 31, 2000 REAFFIRMED: OCTOBER 20, 2004 REAFFIRMED: AUGUST 14, 2013 WITHDRAWN: JUNE 12, 2015 TIA-136-332 March 2000TDMA Third Generation Wireless- Packet Data Service- 136+ Medium Access Control NOTICE TIA Engineering Standards and Publications are designed to se

2、rve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of su

3、ch Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, ei

4、ther domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting

5、 the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability

6、 of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-136.332-RF2-WD, formulated under the cognizance of th

7、e TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of thi

8、s Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to T

9、IAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any lice

10、nsing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been com

11、plied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommend

12、ation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance rel

13、ating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records o

14、r publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products,

15、designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MER

16、CHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, O

17、R THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDI

18、NG WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF

19、 ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA/EIA-136-332iForeword:This foreword is not part of TIA/EIA-136-332.TIA/EIA-136-332

20、specifies a Medium Access Control function that layer-3 functions and radio resource functions may use to transport data octets across a TDMA radio interface.MAC supports two multiplexed MAC Logical Links of different priorities. The MAC provides in sequence delivery of normal data and expedited dat

21、a provided to it by the higher layer. Both unacknowledged and acknowledged modes are supported on the downlink. Acknowledged mode is supported on the uplink. In acknowledged mode, error recov-ery is handled using a sliding window ARQ protocol.TIA/EIA-136-332 was developed by TR-45.3.2, the Data Serv

22、ices Working Group of TR-45.3, the TIA TDMA Wire-less Standards Subcommittee.TIA welcomes suggestions for improvement of this standard. Please send suggestions to the following address:Telecommunications Industry Association2500 Wilson Boulevard - Suite 300Arlington - VA 22201-3836This standard cont

23、ains two annexes: Annex A contains normative text defining half-duplex operation. Annex B contains normative definitions of SDL symbols used within this standard.This standard contains Appendix A contains no requirements, just a description of fixed coding mode transactions. Appendix B contains no r

24、equirements, just a description of Packet Channel Feedback procedures. Appendix C contains no requirements, just descriptions of transaction initiation, completion and abort pro-cedures. Appendix D contains no requirements, just a description of adaptive modulation. Appendix E contains no requiremen

25、ts, just a description of the incremental redundancy radio link protocol.As an aid to the first-time reader, the organization of this document in terms of text and SDL is presented below together with a suggested approach to reading the document, for obtaining either an overview or an in-depth under

26、-standing of the TIA/EIA-136 packet MAC.Document OrganizationThe document is divided into two separate parts, viz. a text part and an SDL part:Text:The textual part of the document consists of chapters 1 through 5 (normative), Annex A (normative) and Appendices A through E (informative). These can b

27、e read independent of the SDL part of the document (chapters 6, 7 and Annex B). They provide the first level of detail of the MAC by providing a functional-level description without going into the details of the internal entities of the MAC. Specifically, they cover the MAC internal/external archite

28、cture, signal flows, coding, transaction descriptions and various other incidental details. The Fixed Coding (FCM) and Incremen-tal Redundancy (IRM) specific text are presented in independent sections with headings that clearly indicate the applicable mode. Therefore readers may focus effort on the

29、sections with content relevant to their interestsSDL:The SDL part of the document consists - in its entirety - of chapters 6 (MS), 7 (BS) and Annex B (all normative). The SDLs are provided in addition to the text as a second level of detail by elaborating on the internals of the MAC. Each SDL corres

30、ponds to one of the internal functional entities of the MAC and is a separate section. It is not necessary to read the SDLs to understand the text part of the document. Each SDL section contains an overview of the SDL, a list (with descriptions) of the variables used in the SDL and finally the SDL f

31、lowcharts. The Fixed Coding (FCM) and TIA/EIA-136-332iiIncremental Redundancy (IRM) specific SDLs are presented independent of each other with headings that clearly indicate the applicable mode. Therefore readers may focus effort on the SDLs with content relevant to their interests.Suggested Approac

32、h to Reading the Document1. The text part of the document should be read first to get a thorough functional-level understanding of theMAC (chapters 1-5 except section 5.10, Annex A and Appendices A-E). Readers may focus effort on thesections with content relevant to their interests. 2. The SDLs may

33、be read next for additional in-depth understanding of the MAC and for comprehensive refer-ence purposes (chapters 6 and 7 and section 5.10). In the first pass, it is sufficient to read the text overview atthe beginning of each SDL section and then to roughly verify the SDL for correspondence with th

34、e over-view. Variable names are self-explanatory so the variable list may be used as a reference. Subsequent passesmay be performed in progressively greater detail as required.Note that there are substantial similarities between the corresponding MS and BS functional entities and also between the FC

35、M and IRM modes (the IRM-specific SDLs appear in the Transmission Controller and PDU Encoder/Decoder entities only). In addition, low-level details such as ARQ table management can be skipped in the initial passes through the SDLs.TIA/EIA-136-332iiiContents1 Introduction . . . . . . . . . . . . . .

36、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 RR Sublayer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 MAC Reference Model. . . . . . . . . .

37、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.1 MAC Logical Link Discriminator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.2 Stuffer . . . . . . . . . . . . . . . . . . . . . . . .

38、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.3 Frame Extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.4 Transmit Buffer . . . . . . . . . . . . . . . . . . . .

39、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.5 Broadcast Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.6 Point-to-Multipoint Transmission Controller . . . . . . . . . . .

40、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.7 Transmission Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.8 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63.9 PDU Encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63.9.1 FC PDU Encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42、 . . . . . . . . . . . . . . . . . . . . . . . 63.9.2 IR PDU Encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63.10 PDU Decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43、 . . . . . . . . . . . . . . . . . . 63.10.1 FC PDU Decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63.10.2 IR PDU Decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44、 . . . . . . . . . . 63.11 IR Segment Encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63.12 IR Segment Decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45、 . . . 73.13 Channel Access Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.14 Subchannel Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.15 MAC

46、Layer Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Services Required from the Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.1 Sleep Mode Support . . . . . . .

47、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.1.1 Superframe Phase (SFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.1.2 PDCH Superframe . . . . . . . . . . . . . . . . . .

48、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.1.3 Primary and Supplementary Phases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 MAC Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105.1 Overview of MAC Signals for Continue MAC PDUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105.2 MAC SDUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155.3 MAC Stuffed SDU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155.4 MAC Data Segments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .