SANS 60335-2-97-2009 Household and similar electrical appliances - Safety Part 2-97 Particular requirements for drives for rolling shutters awnings blinds and similar equipment《家用及.pdf

《SANS 60335-2-97-2009 Household and similar electrical appliances - Safety Part 2-97 Particular requirements for drives for rolling shutters awnings blinds and similar equipment《家用及.pdf》由会员分享，可在线阅读，更多相关《SANS 60335-2-97-2009 Household and similar electrical appliances - Safety Part 2-97 Particular requirements for drives for rolling shutters awnings blinds and similar equipment《家用及.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22293-2 SANS 60335-2-97:2009Edition 2.2 IEC 60335-2-97:2009Edition 2.2 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical ap

4、pliances Safety Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment This national standard is the identical implementation of IEC 60335-2-97:2009 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can onl

5、y be used in conjunction with SANS 60335-1. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 60335-2-97:2009 Edition 2.2 IEC 60335-2-97:2009 Edition 2.2 Table of changes Change No. Date

6、Scope IEC amdt 1 2004 Amended to refer to abnormal situations that can be expected in practice and electromagnetic phenomena that can affect the safe operation of appliances, to include shutters that cover doors and windows and to change requirements for marking and construction. IEC amdt 2 2008 Ame

7、nded to add to the introduction, to extend an example of rolling equipment in the scope, to change requirements for marking and instructions, stability and mechanical hazards, construction and resistance to heat, and to add a referenced standard to the bibliography. National foreword This South Afri

8、can standard was approved by National Committee SABS TC 72, Safety of electrical appliances and electronic equipment, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document, by reference, forms part of the Compulsory spec

9、ification for electrical and electronic apparatus, as published by Government Notice No. R. 89 (Government Gazette 31844) of 6 February 2009. This SANS document was published in August 2009. This SANS document supersedes SANS 60335-2-97:2006 (edition 2.1). IEC 60335-2-97Edition 2.2 2009-01INTERNATIO

10、NAL STANDARD NORME INTERNATIONALEHousehold and similar electrical appliances Safety Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment Appareils lectrodomestiques et analogues Scurit Partie 2-97: Rgles particulires pour les motorisations de vole

11、ts, stores, rideaux et quipements enroulables analogues INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CDICS 29.120.01; 91.060.50 PRICE CODECODE PRIXISBN 2-8318-1017-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commi

12、ssion Electrotechnique Internationale SANS 60335-2-97:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 2 60335-2-97 IEC:2002+A1:2004 +A2:2008 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references .7 3 Definitions 7 4 General

13、 requirement.7 5 General conditions for the tests 8 6 Classification8 7 Marking and instructions.8 8 Protection against access to live parts9 9 Starting of motor-operated appliances 10 10 Power input and current .10 11 Heating 10 12 Void .10 13 Leakage current and electric strength at operating temp

14、erature10 14 Transient overvoltages .10 15 Moisture resistance 11 16 Leakage current and electric strength.11 17 Overload protection of transformers and associated circuits .11 18 Endurance11 19 Abnormal operation 11 20 Stability and mechanical hazards .11 21 Mechanical strength .14 22 Construction.

15、14 23 Internal wiring.14 24 Components .14 25 Supply connection and external flexible cords 14 26 Terminals for external conductors.14 27 Provision for earthing .14 28 Screws and connections.14 29 Clearances, creepage distances and solid insulation 14 30 Resistance to heat and fire.15 31 Resistance

16、to rusting15 32 Radiation, toxicity and similar hazards15 Annexes .18 Bibliography18 Figure 101 Examples of types of driven parts.16 Figure 102 Test apparatus for drives without a driven part .17 SANS 60335-2-97:2009This s tandard may only be used and printed by approved subscription and freemailing

17、 clients of the SABS .60335-2-97 IEC:2002+A1:2004 3 +A2:2008 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment FOREWORD 1) The International Electrot

18、echnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To

19、this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nation

20、al Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO

21、) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation fr

22、om all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be h

23、eld responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any

24、divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publicat

25、ion. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, propert

26、y damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in thi

27、s publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or

28、 all such patent rights. This part of International Standard IEC 60335 has been prepared by IEC technical committee 61: Safety of household and similar electrical appliances. This consolidated version of IEC 60335-2-97 consists of the second edition (2002) documents 61/2230/FDIS and 61/2305/RVD, its

29、 amendment 1 (2004) documents 61/2744/FDIS and 61/2796/RVD and its amendment 2 (2008) documents 61/3694/FDIS and 61/3748/RVD. The technical content is therefore identical to the base edition and its amendments and has been prepared for user convenience. It bears the edition number 2.2. A vertical li

30、ne in the margin shows where the base publication has been modified by amendments 1 and 2. SANS 60335-2-97:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 4 60335-2-97 IEC:2002+A1:2004 +A2:2008 The French version of this standard has not

31、 been voted upon. This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fourth edition (2001) of that standard. NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1. This part 2 supplements o

32、r modifies the corresponding clauses in IEC 60335-1, so as to convert that publication into the IEC standard: Safety requirements for electric drives for rolling shutters, awnings, blinds and similar equipment. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause app

33、lies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in

34、Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in

35、 italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. The committee has decided that the contents of the base publication and its amendments will remain unchanged u

36、ntil the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. NOTE 4 The attention of National Committees is drawn

37、to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is th

38、e recommendation of the committee that the content of the amendment 2 be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. 2 SANS 60335-2-97:2009This s tandard may only be used and printed by approved subscription and freemailing c

39、lients of the SABS .60335-2-97 IEC:2002+A1:2004 5 +A2:2008 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level

40、 of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which elec

41、tromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If

42、 an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a pa

43、rt 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question

44、 over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they hav

45、e been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition

46、 to Part 1 or part 2 standards. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirem

47、ents. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard

48、. 2 SANS 60335-2-97:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 6 60335-2-97 IEC:2002+A1:2004 +A2:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-97: Particular requirements for drives for rolling shutters, awnings, bl

49、inds and similar equipment 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric drives for rolling equipment such as shutters, blinds and awnings, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Drives for equipment with a spring-controlled driven part, such as a folding arm awning, are also within the scope of this standar