NFPA 30A-2018 Code for Motor Fuel Dispensing Facilities and Repair Garages (Effective Date 8 21 2017).pdf

《NFPA 30A-2018 Code for Motor Fuel Dispensing Facilities and Repair Garages (Effective Date 8 21 2017).pdf》由会员分享，可在线阅读，更多相关《NFPA 30A-2018 Code for Motor Fuel Dispensing Facilities and Repair Garages (Effective Date 8 21 2017).pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、ISBN: 978-145591663-4 (Print) ISBN: 978-145591664-1 (PDF) ISBN: 978-145591792-1 (eBook) IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA STANDARDS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), of

2、which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus on fire and other safety issues

3、. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims liability for any

4、personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy or completeness

5、 of any information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone us

6、ing this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the conte

7、nts of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certification or other statement of compliance with the requirements of this document shall not be attributable to the NFPA and is solely the responsibi

8、lity of the certifier or maker of the statement. See ALERT ALERT: THIS STANDARD HAS BEEN MODIFIED BY A TIA OR ERRATA Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuance of a Ten

9、tative Interim Amendment (TIA) or corrected by Errata. An official NFPA Standard at any point in time consists of the current edition of the document together with any TIAs and Errata then in effect. To determine whether an NFPA Standard has been amended through the issuance of TIAs or corrected by

10、Errata, go to www.nfpa.org/docinfo to choose from the list of NFPA Standards or use the search feature to select the NFPA Standard number (e.g., NFPA 13). The document information page provides up-to- date document-specific information as well as postings of all existing TIAs and Errata. It also inc

11、ludes the option to register for an “Alert” feature to receive an automatic email notification when new updates and other information are posted regarding the document. REVISION SYMBOLS IDENTIFYING CHANGES FROM THE PREVIOUS EDITION Text revisions are shaded. A before a section number indicates that

12、words within that section were deleted and a to the left of a table or figure number indicates a revision to an existing table or figure. When a chapter was heavily revised, the entire chapter is marked throughout with the symbol. Where one or more sections were deleted, a is placed between the rema

13、ining sections. Chapters, annexes, sections, figures, and tables that are new are indicated with an N . Note that these indicators are a guide. Rearrangement of sections may not be captured in the markup, but users can view complete revision details in the First and Second Draft Reports located in t

14、he archived revision information section of each code at www.nfpa.org/docinfo. Any subsequent changes from the NFPA Technical Meeting, Tentative Interim Amendments, and Errata are also located there.IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS ADDITIONAL NOTICES AND DISCLAIMERS Updati

15、ng of NFPA Standards Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of Tentative Interim Amendments or cor

16、rected by Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendments and any Errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through t

17、he issuance of Tentative Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications such as the National Fire Codes Subscription Service, visit the NFPA website at www.nfpa.org, or contact the NFPA at the address listed below. Interpretations of NFPA Standa

18、rds A statement, written or oral, that is not processed in accordance with Section 6 of the Regulations Governing the Development of NFPA Standards shall not be considered the ofcial position of NFPA or any of its Committees and shall not be considered to be, nor be relied upon as, a Formal Interpre

19、tation. Patents The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an NFPA Standard. The users of NFPA Standards bear the sole responsibility for determining the validity of any such patent rights, as well a

20、s the risk of infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA Standards. NFPA adheres to the policy of the American National Standards Institute (ANSI) regarding the inclusion of patents in American Nation

21、al Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy: NOTICE: The users attention is called to the possibility that compliance with an NFPA Standard may require use of an invention covered by patent rights. NFPA takes no position as to the validity o

22、f any such patent rights or as to whether such patent rights constitute or include essential patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has led a statement of willingness to grant licenses under these rights on reasonable and nondiscrim

23、inatory terms and conditions to applicants desiring to obtain such a license, copies of such led statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the address listed below. Law and Regulations Users of NFPA Standards should consult applicable federal, st

24、ate, and local laws and regulations. NFPA does not, by the publication of its codes, standards, recommended practices, and guides, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights NFPA Standards are copyrighted. Th

25、ey are made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of safe practices and methods. By making these documents available for use and adoption by p

26、ublic authorities and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Standards for regulatory purposes should be accomplished through adoption by reference. The term “adoption by reference” means the citing of title, edition, and publishing information

27、 only. Any deletions, additions, and changes desired by the adopting authority should be noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents, adopting authorities are requested to notify the NFPA (Attention: Secretary, Standards Council) i

28、n writing of such use. For technical assistance and questions concerning adoption of NFPA Standards, contact NFPA at the address below. For Further Information All questions or other communications relating to NFPA Standards and all requests for information on NFPA procedures governing its codes and

29、 standards development process, including information on the procedures for requesting Formal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA standards during regular revision cycles, should be sent to NFPA headquarters, addressed to the attention of

30、the Secretary, Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101; email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/docinfo.30A-1 NFPA and National

31、 Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2017 National Fire Protection Association . All Rights Reserved. NFPA 30A Code for Motor Fuel Dispensing Facilities and Repair Garages 2018 Edition This edition

32、of NFPA 30A, Code for Motor Fuel Dispensing Facilities and Repair Garages, was prepared by the Technical Committee on Automotive and Marine Service Stations. It was issued by the Standards Council on August 1, 2017, with an effective date of August 21, 2017, and supersedes all previous editions. Thi

33、s document has been amended by one or more Tentative Interim Amendments (TIAs) and/or Errata. See “Codes & Standards” at www.nfpa.org for more information. This edition of NFPA 30A was approved as an American National Standard on August 21, 2017. Origin and Development of NFPA 30A This code originat

34、ed as Chapter 7 of NFPA 30, Flammable and Combustible Liquids Code, and was developed by the Technical Committee on Flammable and Combustible Liquids to provide more detailed requirements for vehicle fueling and to anticipate the need to address self-service fueling and alternative fuels. It was rst

35、 adopted in 1984. The second edition, adopted in 1987, recognized unattended self-service fueling, and a third edition, adopted in 1990 and prepared by the (new) Technical Committee on Automotive and Marine Service Stations, incorporated requirements for lubrication-only service facilities. The four

36、th edition, adopted in 1993, incorporated several major amendments, the most important of which allowed aboveground fuel storage tanks at retail motor fuel dispensing facilities, based on a Tentative Interim Amendment to the 1990 edition. The 1996 (fth) edition of NFPA 30A incorporated the following

37、 major amendments: (1) An increase in the maximum allowable aboveground fuel storage for Class II liquids (i.e., diesel fuel) at eet refueling operations to 75,700 L (20,000 gal) per tank, with a maximum aggregate capacity of 302,800 L (80,000 gal) (2) A new chapter that provided comprehensive re sa

38、fety requirements for marine motor fuel dispensing facilities, including fuel dispensing practices (3) More specic requirements for installation and function of the emergency shear valve at the base of the fuel dispenser (4) A new section on low-melting-point piping materials After the adoption of t

39、he 1996 edition of NFPA 30A, the Technical Committee on Automotive and Marine Service Stations was given responsibility for NFPA 88B, Standard for Repair Garages, and was also charged with developing re safety requirements for alternative fuels, such as compressed natural gas (CNG), when these fuels

40、 are dispensed along with liquid fuels. With respect to repair garages, the Technical Committee decided to integrate the technical requirements of NFPA 88B into NFPA 30A.MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES 30A-2 2018 Edition The 2000 (sixth) edition of NFPA 30A incorporated the follo

41、wing major amendments: (1) A change in the title of the document to Code for Motor Fuel Dispensing Facilities and Repair Garages to more accurately reect its scope (2) A complete editorial review to enhance readability and to replace ambiguous text (3) Revisions to the minimum separation distances f

42、or aboveground storage tanks, including minimum separation distances for protected aboveground tanks and tanks in vaults (4) Addition of basic requirements for protected aboveground tanks (5) Corrosion protection requirements for tanks and piping (6) New and more detailed requirements for installati

43、on and testing of piping systems, including secondary containment piping (7) Revisions to the requirements for emergency power disconnects for fuel dispensing systems (8) Incorporation of requirements for repair garages from NFPA 88B (9) Addition of a new chapter that set requirements for compressed

44、 natural gas (CNG), liqueed natural gas (LNG), and liqueed petroleum gas (LP-Gas) The 2003 (seventh) edition of NFPA 30A contained one major revision and several less signicant changes. The major revision was the addition of a new chapter, Chapter 13, Farms and Remote Sites, which incorporated the r

45、equirements of NFPA 395, Standard for the Storage of Flammable and Combustible Liquids at Farms and Isolated Sites, which had been withdrawn in 2002. Other changes included a revision of the denition of re-resistant tanks in Chapter 3, a change in scope to reect the incorporation of requirements fro

46、m NFPA 395, and the addition of material from TIA No. 733 containing requirements and annex material warning people of electrostatic and other hazards that occur during dispensing operations. The 2008 (eighth) edition of NFPA 30A contained minor revisions. All technical specications for tanks were r

47、emoved and replaced by references to NFPA 30, Flammable and Combustible Liquids Code. References to NFPA 52, Vehicular Gaseous Fuel Systems Code, were inserted into Chapter 12 to address storage and dispensing of hydrogen at facilities that dispense gaseous liquid fuels. The 2012 (ninth) edition of

48、NFPA 30A incorporated the following major amendments: (1) Denitions for combustible liquid and ammable liquid have been revised to correlate with NFPA 30, Flammable and Combustible Liquids Code, and relocated to their proper location in Chapter 3. (2) Erroneous cross-references to specic paragraphs

49、in NFPA 30, Flammable and Combustible Liquids Code, were corrected. (3) New Subsection 6.3.6, Inspections, was added to address inspection, maintenance, and repairs of fuel dispensing equipment, leak detection equipment, and secondary containment equipment. (4) New Paragraph 6.6.1.1 was added to require that any modication of the dispensing nozzle be either listed or approved by the manufacturer of the nozzle. (5) Subsection 6.6.1 was corrected to require that dispensing nozzles have a latch-open device. (6) New Paragraph 7.4.7.4 was added to require th