NEMA C82 2-2002 Lamp Ballasts - Method of Measurement of Fluorescent Lamp Ballasts《灯镇流器 荧光灯镇流器的测量方法[代替 ANSI C82 2 ANSI C82 2]》.pdf

《NEMA C82 2-2002 Lamp Ballasts - Method of Measurement of Fluorescent Lamp Ballasts《灯镇流器 荧光灯镇流器的测量方法[代替 ANSI C82 2 ANSI C82 2]》.pdf》由会员分享，可在线阅读，更多相关《NEMA C82 2-2002 Lamp Ballasts - Method of Measurement of Fluorescent Lamp Ballasts《灯镇流器 荧光灯镇流器的测量方法[代替 ANSI C82 2 ANSI C82 2]》.pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C82.2 2002For Lamp Ballasts - Method of Measurement of Fluorescent Lamp BallastsANSI C82.2 2002 Revision of ANSI C82.2-1994(R1995) Copyright 2002 by American National Standard Lighting Group- NEMA American National Standard

2、Approved: June 6, 2002 Secretariat: ANSLG- National Electrical Manufacturers Association For Lamp Ballasts- Method of Measurement of Fluorescent Lamp Ballasts An American National Standard implies a consensus of those substantially concerned with its scope and provisions. It is intended as a guide t

3、o aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to

4、the standards. Users are cautioned to obtain the latest editions. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretati

5、on of an American National Standard in the name of the American National Standards Institute. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, re

6、vise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lighting Group

7、- NEMA iiAmerican National Standard Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An American National Standard implies a consensus of those substanti

8、ally concerned with its scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily

9、unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The existence of an American National Standard does not in any respect preclude anyone, whether s/he has approved the standard or not, from manufacturing, marketing

10、, purchasing, or using products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation

11、 of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the Committee Secretariat referred to on

12、 the title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards ma

13、y receive current information on all standards by calling or writing the American National Standards Institute. Printed and distributed by: Information Handling Services/Global Engineering Documents 15 Inverness Way East, Englewood, CO 80112-5776 Under Contract with National Electrical Manufacturers

14、 Association Copyright 2002 by American National Standard Lighting Group In Affiliation with National Electrical Manufacturers Association All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission

15、of the publisher. Printed in the United States of America ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lighting Group- NEMA iii This standard is Dedicated to the memory of J. F. Luchetta Who gave more than 40 years of service to the lighting indust

16、ry. We will miss you. 1933-2001ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lighting Group- NEMA ivThis Page Intentionally Left Blank ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lighting Group- N

17、EMA v Foreword (This Foreword is not part of ANSI C82.2-2002.) Suggestions for improvement of this standard should be submitted to the Secretariat C82, American National Lighting Group of the National Electrical Manufacturers Association, 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209. This s

18、tandard was processed and approved by Accredited Standards Committee on Lamp Ballasts, C82, and its Sub-Committee, C82-1. Committee approval of the standard does not necessarily imply that all committee members voted for that approval Information concerning the approval of this standard is based on

19、the documents listed in the table below: CDV RV C82(1)/m680 C82(1)/m681v2 At the time of publications the C82 committee consisted of the following members: Howard Wolfman, Chair C82 Ken Denton, Technical Coordinator Randolph N. Roy, Secretariat Ken Denton, Consulting Editor Organization Represented:

20、 Name of Representative: Advance Transformer Company .Robert Erhardt Cooper Lighting (NEMA Delegate) Donald Miletich Edison Electric Institute (Delegate). Al Maguire GE Lighting . Edward Yandek Edward Hammer Selmar DorseyGE Lighting Systems Michael Owens Rebecca LancasterHolophane Lighting Company.

21、Michael Tanner Hubbell Lighting, Inc. (NEMA Delegate) . William E. Buckson InterTek Testing Services . David Edwards David Ellis Lithonia/Hi-Tek Lighting (NEMA Delegate) . Fred Carpenter MagneTek Lighting Products Group .Bill Brosius Michael Stein OSRAM SYLVANIA.Howard Wolfman Joe Parisella Philips

22、Lighting CompanyAl Rousseau Underwriters Laboratories Inc. John Marshall David Belt ANSI C82.2-2002 Revision of ANSI C82.2-1984 (R1995) Copyright 2002 by American National Standard Lighting Group- NEMA viAt the time it approved this standard, the C82-1 Work Group had the following members: Ken Dento

23、n, Chair, C82-1 Randolph N. Roy, Secretariat Organization Represented: Name of Representative: Advance Transformer Company.Robert Erhardt Beth Jug GE Lighting Edward M. Yandek Edward E. Hammer Howard Industries Inc. . Wayne Causey Eric Brown Industrias Sola Basic Emilio Catan G. Gerardo Arias InterT

24、ek Testing Services David Edwards Lutron Electronics Co. Inc. . Robert Newman Jr. MagneTek Lighting Products Group.Thomas Poehlman Robert BurkeManufacturera De Reactores . Garcia Azcue OSRAM SYLVANIA INC. . Howard Wolfman Joe Parisella Philips Lighting Company. Thomas O. Leyh Al C. Rousseau Power Li

25、ghting Products Inc. Marcelino Garcia Thomas connecting the filaments from a lamp to one side of the test circuit and the filaments of a second lamp connected to the other side of the test circuit. 19 Starting capacitor In the case of the series types of rapid start ballasts, the capacitance of the

26、starting capacitor(s) should be measured using a universal capacitance bridge. The measurement shall be made across the appropriate test ballast lamp circuit(s) with the ballast deactivated. 7The specific value of the test resistor and the related lamp types can be found in ANSI C78.4 NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB