NAVY MIL-STD-3001-7-2001 DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS PERIODIC MAINTENANCE REQUIREMENTS (PART 7 OF 8 PARTS) [Superseded NAVY MIL618.pdf

《NAVY MIL-STD-3001-7-2001 DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS PERIODIC MAINTENANCE REQUIREMENTS (PART 7 OF 8 PARTS) [Superseded NAVY MIL618.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-3001-7-2001 DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS PERIODIC MAINTENANCE REQUIREMENTS (PART 7 OF 8 PARTS) [Superseded NAVY MIL618.pdf（74页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-STD-3001-7(AS)15 May 2001SUPERSEDING(See Section 6.)DEPARTMENT OF DEFENSESTANDARD PRACTICEDIGITAL TECHNICAL INFORMATIONFORMULTI-OUTPUT PRESENTATIONOFTECHNICAL MANUALSPERIODIC MAINTENANCE REQUIREMENTS(PART 7 OF 8 PARTS)AMSC A7194 AREA TMSSDISTRIBUTION STATEMENT A. Approved for public release; dis

2、tribution is unlimited.NOT MEASUREMENTSENSITIVEProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-7(AS) ii FOREWORD 1. This eight-part standard establishes the requirements needed to prepare digital technical information for multi-output pr

3、esentation of NAVAIR work package Technical Manuals (TMs). The technical content and mandatory style and format requirements contained in this eight-part standard can be used to develop and assemble complete TMs for aircraft weapon systems, aeronautical equipment, airborne weapons/ equipment, and su

4、pport equipment work package technical manuals. The requirements are applicable for the output of paper technical manuals or for the display of page-oriented, scrollable, and frame-based technical manuals on an Electronic Display System (EDS). 2. MIL-STD-3001-7 is Part 7 of 8 Parts and is incomplete

5、 without Parts 1 through 6 and Part 8. Part 7 establishes the technical content requirements for the preparation of periodic maintenance inspection requirements for aircraft weapon systems, quick engine change assemblies, powered aerial targets (missiles), support equipment, automatic test equipment

6、, airborne armament equipment or special stores, powered surface targets, and aviation life support systems. This data can be used to develop TMs in a variety of output forms, including interactive screen presentations and page-based, printed manuals. 3. MIL-STD-3001-1 contains general preparation r

7、equirements for the multi-output presentation of NAVAIR work package TMs. MIL-STD-3001-2 through MIL-STD-3001-8 contain specific functional technical content requirements for the preparation of all NAVAIR work package TMs and revisions. Parts 1 through 8 are identified below. MIL-STD-3001-1 Preparat

8、ion of Digital Technical Information for Multi-output Presentation of Technical Manuals. MIL-STD-3001-2 Description, Principles of Operation, and Operation Data. MIL-STD-3001-3 Testing and Troubleshooting Procedures. MIL-STD-3001-4 Maintenance Information with IPB. MIL-STD-3001-5 Aircraft Wiring Inf

9、ormation. MIL-STD-3001-6 Structural Repair Information. MIL-STD-3001-7 Periodic Maintenance Requirements. MIL-STD-3001-8 Separate Illustrated Parts Breakdown (IPB). 4. MIL-HDBK-3001, Guide to the General Style and Format of U.S. Navy Work Package Technical Manuals, complements this eight-part standa

10、rd. MIL-HDBK-3001 provides Navy-preferred, nonmandatory style and format requirements for the preparation of page-oriented, scrollable, and frame-based work package technical manuals. 5. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improvi

11、ng this document should be addressed to: Commander, Naval Air Warfare Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.Provided by IHSNot for

12、 ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-7(AS) CONTENTS PARAGRAPH PAGE iiiFOREWORD . ii 1. SCOPE 1 1.1 Scope 1 2. APPLICABLE DOCUMENTS. 1 3. DEFINITIONS 1 4. GENERAL REQUIREMENTS 1 4.1 General 1 4.2 Selective application and tailoring. 1 4.3 Technical

13、content . 1 4.3.1 Use of the DTDs. 1 4.4 Preparation of digital data for electronic delivery 1 4.5 Style and format requirements. 2 4.6 Standard tables and lists 2 4.7 Electrostatic discharge (ESD) sensitive equipment 2 4.8 Nuclear hardness . 2 4.9 Ozone depleting substances (ODS) 2 4.10 Special pro

14、cesses . 2 5. DETAILED REQUIREMENTS. 2 5.1 Preparation of periodic maintenance requirements . 3 5.1.1 Aircraft card set 3 5.1.1.1 Periodic maintenance information card decks 3 5.1.1.2 Turnaround checklist . 4 5.1.1.3 Daily inspection card deck or daily inspection/servicing card deck . 4 5.1.1.4 Spec

15、ial inspection card deck 4 5.1.1.5 Preservation/depreservation card deck . 5 5.1.1.6 Conditional inspection card deck . 5 5.1.1.7 Phased maintenance card deck 5 5.1.1.7.1 Flight-hour inspections 5 5.1.1.7.2 Phase or calendar inspections . 5 5.1.1.7.3 Phase inspection interval. 6 5.1.1.7.4 Phase insp

16、ection structure 6 5.1.1.8 Zonal inspections 6 5.1.2 QECA card set 6 5.1.3 Airborne armament equipment (AAE) /special stores (SS) card set 7 5.1.3.1 Periodic maintenance information card deck 7 5.1.3.2 Daily/special cards . 7 5.1.4 Support equipment (SE)/automatic test equipment (ATE) card set . 7 5

17、.1.4.1 Preoperational checklist card deck (for SE only) . 7 5.1.4.2 Daily inspection cards or daily inspection/servicing cards . 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-7(AS) CONTENTS PARAGRAPH PAGE iv5.1.4.3 Special inspection

18、 card deck 8 5.1.4.4 Preservation/depreservation requirements card deck . 8 5.1.4.5 Conditional inspections card deck 8 5.1.4.6 Calendar or start maintenance requirements card decks. 8 5.1.5 Powered aerial target (PAT) card set 9 5.1.5.1 Acceptance/initial buildup card deck 9 5.1.5.2 Prelaunch card

19、deck 9 5.1.5.3 Postlaunch/servicing card deck . 9 5.1.6 Powered surface target (PST) card set 9 5.1.6.1 Preoperational checklist deck 9 5.1.6.2 Periodic maintenance requirements card deck . 9 5.1.7 Aviation life support systems (ALSS) card set 9 5.1.7.1 Periodic maintenance requirements card deck .

20、9 5.1.8 Airborne mine countermeasure (AMCM) equipment card set . 10 5.1.8.1 Periodic maintenance information card deck 10 5.1.8.2 Turnaround checklist . 10 5.1.8.3 Daily card deck 10 5.1.8.4 Special inspection card deck 10 5.1.8.5 Preservation/Depreservation requirements card deck . 11 5.1.8.6 Condi

21、tional inspections card deck 11 5.1.8.7 Calendar , hour , or start maintenance requirements card decks 11 5.1.9 Unmanned aerial vehicle (UAV) card set 12 5.1.9.1 Periodic maintenance information card deck 12 5.1.9.2 Turnaround checklist . 12 5.1.9.3 Daily inspection card deck or daily inspection/ser

22、vicing card deck 12 5.1.9.4 Special inspection card deck 12 5.1.9.5 Preservation/Depreservation requirements card deck . 13 5.1.9.6 Conditional inspections card deck 13 5.1.9.7 Calendar , hour , or start maintenance requirements card decks 13 5.2 Card types and arrangement . 14 5.2.1 Front matter ca

23、rds 15 5.2.2 Introduction card . 15 5.2.2.1 Introduction card for periodic maintenance information card (PMIC) deck 15 5.2.2.2 Introduction card for AMCM or UAV PMIC decks 16 5.2.3 Introduction and application statements card . 16 5.2.3.1 Turnaround checklist deck. 16 5.2.3.2 Preoperational checklis

24、t decks . 17 5.2.3.3 Aircraft daily card deck and special, preservation, and conditional card decks . 17 5.2.3.4 Calendar or phased maintenance requirements card deck 18 5.2.3.5 QECA maintenance requirements card deck 19 Provided by IHSNot for ResaleNo reproduction or networking permitted without li

25、cense from IHS-,-,-MIL-STD-3001-7(AS) CONTENTS PARAGRAPH PAGE v5.2.3.6 Airborne armament equipment or special stores daily/special card deck 20 5.2.3.7 SE/ATE calendar or start/special/preservation/conditional card decks. 21 5.2.3.8 Aircraft peculiar support equipment (PSE) maintenance requirements

26、card deck. 21 5.2.3.9 Powered aerial target (PAT) acceptance/initial buildup card deck 22 5.2.3.10 Powered aerial target (PAT) prelaunch card deck. 22 5.2.3.11 Powered aerial target (PAT) postlaunch card deck . 22 5.2.3.12 Powered surface target (PST) periodic card deck. 23 5.2.3.13 AMCM or UAV dail

27、y card deck 23 5.2.3.14 AMCM or UAV calendar or start/special/preservation/conditional card decks 23 5.2.3.15 ALSS maintenance requirements card deck 24 5.2.3.15.1 ALSS maintenance requirements card applicable equipment list. 24 5.2.4 Definitions card . 25 5.2.5 Removal/replacement schedule and spec

28、ial tracking requirements card (for periodic maintenance information card decks only). 25 5.2.6 Inspection requirements index cards (for periodic maintenance information card decks only) . 26 5.2.7 Conditional inspection listing cards (for aircraft, AMCM and UAV periodic maintenance information card

29、 decks only) 26 5.2.8 Phase change implementation card (for aircraft periodic maintenance information card decks only) . 26 5.2.9 Abbreviations and index cards . 27 5.2.10 Abbreviations, index, and checkflight requirements card (for phased maintenance card decks only) . 27 5.2.11 Special tools/suppo

30、rt equipment list cards 27 5.2.12 Consumable maintenance material list cards . 28 5.2.13 Replacement parts list cards 28 5.2.14 Work area cards or zone cards . 28 5.2.15 Zone title and description cards (for aircraft special/preservation/ conditional and phased maintenance card decks only) . 28 5.2.

31、16 Zonal inspection criteria card (for aircraft special/preservation/ conditional and phased maintenance card decks only) . 29 5.2.17 Access panel cards . 29 5.2.18 Antenna location cards . 29 5.2.19 Checklist task cards 30 5.2.20 Phase sequence control cards (for aircraft phased maintenance card de

32、cks only). 30 5.2.21 QECA sequence control card(s) . 30 5.2.22 Task cards 30 5.2.22.1 Preservation task card requirements 32 5.2.22.2 Assist cards . 32 5.2.22.3 Lubrication task cards 33 5.2.23 Illustration cards 33 Provided by IHSNot for ResaleNo reproduction or networking permitted without license

33、 from IHS-,-,-MIL-STD-3001-7(AS) CONTENTS PARAGRAPH PAGE vi5.2.23.1 Lubrication illustration cards 33 5.2.24 QA cards 34 5.2.25 Aircraft service period adjustment (ASPA) card (Aircraft special inspection card deck only). 35 5.3 Card forms and card field details . 35 5.4 Card numbering 37 5.4.1 PMIC

34、card decks 37 5.4.2 Turnaround and preoperational checklists 37 5.4.3 Daily, special, preservation, and conditional card decks. 37 5.4.4 Phased maintenance requirements card deck. 38 5.4.5 QECA deck 38 5.4.6 ALSS deck . 39 5.4.7 Aircraft PSE deck. 39 5.4.8 Added cards 39 5.4.9 Deleted cards 39 5.4.1

35、0 Renumbering . 39 5.5 Changes and revisions 39 5.5.1 Changes 39 5.5.2 Revisions 39 6. NOTES 40 FIGURE FIGURE 1. Example of prime and decimal card format 41 FIGURE 2. Example of preface and illustration card format. 41 FIGURE 3. Example of an aircraft service period adjustment (ASPA) requirements ca

36、rd for aircraft preparation. 42 FIGURE 4. Example of an aircraft service period adjustment (ASPA) requirement card for aircraft restoration. . 43 FIGURE 5. Example of definitions card. 44 FIGURE 6. Example of a removal/replacement schedule and special tracking requirements card. . 44 FIGURE 6. Examp

37、le of removal/replacement schedule and special tracking requirements card - continued. . 45 FIGURE 7. Example of an inspection requirement card. . 45 FIGURE 7. Example of an inspection requirement index card - continued. . 46 FIGURE 8. Example of a conditional inspection listing card. . 46 FIGURE 9.

38、 Example of a phase change implementation card 47 FIGURE 9. Example of a phase change implementation card - continued. . 47 FIGURE 10. Example of an abbreviations and index card for aircrew life support systems card deck. . 48 FIGURE 11. Example of an abbreviations and index card for PSE card deck.

39、48 FIGURE 12. Example of an abbreviations, index, and checkflight requirement card for phased maintenance checklist. 49 FIGURE 13. Example of a special tools/support equipment card (or replacement parts card) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I

40、HS-,-,-MIL-STD-3001-7(AS) CONTENTS PARAGRAPH PAGE viifor aircrew life support systems or QECA card deck. . 49 FIGURE 14. Example of a special tools/support equipment card for support equipment card deck. 50 FIGURE 15. Example of a consumable maintenance material list card for aircrew life support sy

41、stems or QECA card deck. 50 FIGURE 16. Example of a consumable maintenance material list card for aircraft phased maintenance requirements checklist. 51 FIGURE 17. Example of a consumable maintenance material list card for support equipment card deck. 51 FIGURE 18. Example of a replacement parts lis

42、t card for phased maintenance checklist 52 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-7(AS) CONTENTS FIGURE PAGE viii FIGURE 19. Example of a replacement parts list card for support equipment card decks 52 FIGURE 20. Example of work

43、 area or zone cards. 53 FIGURE 21. Example of a zones card. 53 FIGURE 22. Example of a zone title and description card. 54 FIGURE 23. Example of a zonal inspection criteria card. 54 FIGURE 24. Example of an access panel illustration card. 55 FIGURE 25. Example of an access panel matrix card. . 55 FI

44、GURE 26. Example of an antenna location illustration card 56 FIGURE 26. Example of an antenna location illustration card - continued. . 56 FIGURE 27. Example of a checklist task page.57 FIGURE 28. Example of a phase sequence control card.58 FIGURE 29. Example of a quick engine change assembly (QECA)

45、 sequence control card. 59 FIGURE 30. Example of a task card. 60 FIGURE 31. Example of an assist card. 60 FIGURE 32. Example of a lubrication task card. 61 FIGURE 33. Example of a task card illustration. 61 FIGURE 34. Example of a lubrication illustration card. . 62 FIGURE 35. Example of a lubricati

46、on symbols card. 63 FIGURE 36. Example of final and in-process quality assurance cards. 64 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-3001-7(AS) 1 1. SCOPE. 1.1 Scope. This part of the standard establishes the technical content requireme

47、nts for the preparation of periodic maintenance inspection requirements for aircraft weapon systems, quick engine change assemblies, powered aerial targets (missiles), support equipment, automatic test equipment, airborne armament equipment or special stores, powered surface targets, and aviation li

48、fe support systems. This data can be used to develop periodic maintenance requirements card sets in a variety of output forms, including interactive screen presentations and printed maintenance work cards. 2. APPLICABLE DOCUMENTS. The applicable documents in section 2 of MIL-STD-3001-1 apply to this

49、 Part. 3. DEFINITIONS. The definitions in section 3 of MIL-STD-3001-1 apply to this Part. 4. GENERAL REQUIREMENTS. 4.1 General. Periodic maintenance requirements consist of a series of scheduled maintenance requirements that provide a basis for planning, scheduling, and execution of scheduled maintenance. The requirements shall be developed to provide