FORD SB1-15-1988 NEOPRENE LATEX COTTON (KNIT) LINED GLOVE《氯丁胶乳棉（针织织物）衬里手套》.pdf

《FORD SB1-15-1988 NEOPRENE LATEX COTTON (KNIT) LINED GLOVE《氯丁胶乳棉（针织织物）衬里手套》.pdf》由会员分享，可在线阅读，更多相关《FORD SB1-15-1988 NEOPRENE LATEX COTTON (KNIT) LINED GLOVE《氯丁胶乳棉（针织织物）衬里手套》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、FORD HANUFACTURING STANDARDS SDl-15 JULY, 1988 NEOPRENE LATEX COTTON (KNIT) LINED GLOVE SSl-15 Page 1 1. USAGE : The usage of this giovt must be approved by the Corporate Safety Office for handling sharp objects in bath solutions. Recommended for protection against oil, acid, grease, caustic and alc

2、ohol. Additional information regarding glove usage can be found in Jndustrial Hygiene- Technical Bulletin No. 8 dated z/25/76 entitled Skin Protection from Chemicals - Glove Usage. Protects from hot and cold temperatures: absorbs perspiration. Laundcrab I t. 2. RATER1 AL: 2.1 COATING: Neoprene Latex

3、 Coating securely bonded to I i ntr bond 5 lbr./inch (2.3 kg/mm). Blue Color Dictionary Blue gl. Plate 34. Hilled neoprene, black, nonslip grip overdip 2-3/4 in. +/- l/4 in. (7011s +/- 6mn) btiow thumb crotch. .030-.033 in. (0.76mm-0.84mm) normal thickness. 2.2 LINING: Natural color interlocked knit

4、. 4011 yarn, 18 twist/inch. Single seam lining construction sewn with No. 50 thread, 10 chain stitches Nassait blue (2 color thread stitch reveals skipped stitches for inspection). 2.3 SIZE: Length from base to tip of middle finger 11-l/4 in. +/- l/4 in. (286mm +/- 6s) . Palm width at thumb crotch 4

5、-7/8 in. (12411). Thumb crotch to tip of index finger 4-l/4 in. (lO8mn). Cuff width 5-3/8 in. (137md. 2.4 WEIGHT: 8-l/4 oz. Pr +/- l/3 oz. (.23 kg +/- .OOl kg) site large. 3. CQNSTRUCT I ON : Five-finger style made on comnerciai glove forms in accordance with Federal Specifications 22-381 to conform

6、 in shape to natural hand. Curved finger style. Tip of thumb shall turn inward slightly toward second finger. Base of thumb positioned in front of i ndex f i ngtr wi th base set but as on natura 1 hand and cant i nuts to palm in gentle, til iptical curve to keep thumb crotch area and part just below

7、 thumb crotch area on palm without noticeabiecrease. C.iquid proof - chemical resistant - oil, grease. acid, caustic, alcohol and solvent resistant. Physical hazard resistant - good insulation properties for short duration liquid iimsersion or exposure i.e., 212 F (100 C). G 1 oves launderable. Fold

8、 cuffs down to fully cover nonslip grip surface to facilitate automatic machine washing and drying. 4. SUPPLIER3 RESPONSIBILITY: All material supplied to this standard must be equivalent in all characteristics to the material upon which approval was originally granted, and shall be satisfactory for

9、the intended application. FORD MANUFACTURING STANDARDS SBl-15 JULY, 1988 NEOPRENE LATEX COTTON (KNIT) LINED GLOVE SSl-15 Page 2 5. APPROVAL OF NEW SUPPLIERS: 5.1 Gloves submitted by new manufacturers to this standard must have laboratory and shop trial approvals. Recommendations for the L additions

10、of new manufacturers to the bnufacturing Approved Source List (ASL) must be made by the appropriate division standards activity in writing to the Plant Engineering Office, Nanufacturing Staff. All supporting data must atcocnpany the written request. 5.2 The Plant Engineering Office, Ranufacturing Staff, and the ions Staff, mloyee Relat Environmental Health and Safety Hanager, Emp wi 11 review request approval.