FORD ESW-M2C68-A-2010 OIL RUBBER PROCESSING AID TO BE USED WITH FORD WSS-M99P1111-A 《橡胶加工助剂石油 与福特WSS-M99P1111-A 一起使用》.pdf

《FORD ESW-M2C68-A-2010 OIL RUBBER PROCESSING AID TO BE USED WITH FORD WSS-M99P1111-A 《橡胶加工助剂石油 与福特WSS-M99P1111-A 一起使用》.pdf》由会员分享，可在线阅读，更多相关《FORD ESW-M2C68-A-2010 OIL RUBBER PROCESSING AID TO BE USED WITH FORD WSS-M99P1111-A 《橡胶加工助剂石油 与福特WSS-M99P1111-A 一起使用》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 08 10 N-STATUS No replacement named D. DiGregorio, NA 2004 05 17 Revised Para 3.0 inserted; para 3.7 & 4 deleted 1964 09 04 Released CW10-113000-11 Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 1

2、OIL, RUBBER PROCESSING AID ESW-M2C68-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a naphthenic oil suitable for use as a rubber processing aid. 2. APPLICATION This specification was released originally for oil used as the lubricant for the assembly of the ru

3、bber driveshaft elements. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 VISCOSITY AT 37.8 C 31.9 - 34.1 cSt (mm2/s) (ASTM D 445) 3.2 API GRAVITY 20.2 - 22.5 (ASTM D 287) 3.3 FLASH POINT, min 149 C (ASTM D 92) 3.4 FIRE POINT, min 183 C (ASTM D 92) 3.5 POUR POINT, max -29 C (ASTM D 97) 3.6 ANILINE POINT 68 - 71 C (ASTM D 611)