ETSI TS 124 608-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Terminating Identification Presentation (TIP) and T.pdf

《ETSI TS 124 608-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Terminating Identification Presentation (TIP) and T.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 124 608-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Terminating Identification Presentation (TIP) and T.pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelTerminating Ideand Terminatingusing IP Multimedia Prot(3GPP TS 24.6floppy3TECHNICAL SPECIFICATION124 608 V13.0.0 (2016communications system (Phaelecommunications System (LTE; Identification Presentation (TIng Identification Restriction (Tia (IM) C

2、ore Network (CN) subrotocol specification .608 version 13.0.0 Release 1316-01) hase 2+); (UMTS); TIP) ( IR) ubsystem; 13) ETSI ETSI TS 124 608 V13.0.0 (2016-01)13GPP TS 24.608 version 13.0.0 Release 13Reference RTS/TSGC-0124608vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Ant

3、ipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present

4、document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions

5、and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the curren

6、t status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be re

7、produced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restric

8、tion extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of it

9、s Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 124 608 V13.0.0 (2016-01)23GPP TS 24.608 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present docu

10、ment may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of

11、 ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other

12、IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to tec

13、hnical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryf

14、orm.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “mu

15、st not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 608 V13.0.0 (2016-01)33GPP TS 24.608 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions an

16、d abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 8g34 Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) . 8g34.1 Introduction 8g34.2 Description . 8g34.2.1 General description . 8g34.3 Operational requirements . 9g34.3.1 Provision/withdrawal 9g

17、34.3.1.1 TIP provision/withdrawal 9g34.3.1.2 TIR provision/withdrawal . 9g34.3.2 Requirements on the originating network side 9g34.3.3 Requirements on the terminating network side . 9g34.4 Syntax requirements . 10g34.5 Signalling procedures . 10g34.5.0 General 10g34.5.1 Activation/deactivation . 10g

18、34.5.1A Registration/erasure 10g34.5.1B Interrogation . 11g34.5.2 Invocation and operation 11g34.5.2.1 Actions at the originating UE 11g34.5.2.2 Void. 11g34.5.2.3 Void. 11g34.5.2.4 Actions at the AS serving the originating UE . 11g34.5.2.5 Void. 12g34.5.2.6 Void. 12g34.5.2.7 Void. 12g34.5.2.8 Void.

19、12g34.5.2.9 Actions at the AS serving the terminating UE 12g34.5.2.10 Void. 12g34.5.2.11 Void. 12g34.5.2.12 Actions at the terminating UE . 12g34.6 Interaction with other services 12g34.6.1 Communication session Hold (HOLD). 12g34.6.2 Terminating Identification Presentation (TIP) 13g34.6.3 Terminati

20、ng Identification Restriction (TIR) 13g34.6.4 Originating Identification Presentation (OIP) . 13g34.6.5 Originating Identification Restriction (OIR) . 13g34.6.6 Conference (CONF) 13g34.6.7 Communication DIVersion services (CDIV) 13g34.6.8 Malicious Communication IDentification (MCID) 13g34.7 Interac

21、tions with other networks 14g34.7.1 Void 14g34.7.2 Void 14g34.7.3 Void 14g34.8 Parameter values (timers) . 14g34.9 Service configuration . 14g3ETSI ETSI TS 124 608 V13.0.0 (2016-01)43GPP TS 24.608 version 13.0.0 Release 134.9.0 General 14g34.9.1 Data semantics 14g34.9.2 XML schema 15g3Annex A (infor

22、mative): Signalling flows 16g3Annex B (informative): Example of filter criteria . 17g3B.1 Originating IFC for TIP service . 17g3B.2 Terminating IFC for TIR service 17g3Annex C (informative): Void . 18g3Annex D (informative): Change history . 19g3History 20g3ETSI ETSI TS 124 608 V13.0.0 (2016-01)53GP

23、P TS 24.608 version 13.0.0 Release 13Foreword This Technical Specification (TS) was been produced by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) and originally published as ETSI TS 183 008 18. It was transferred to the 3r

24、d Generation Partnership Project (3GPP) in January 2008. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying

25、change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of su

26、bstance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 608 V13.0.0 (2016-01)63GPP TS 24.608 version 13.0.0 Release 131 Scope The present document specifies the stage three

27、protocol description of the Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) services, based on stage one and two of the ISDN COLP 3 and COLR 4 supplementary services. It provides the protocol details in the IP Multimedia (IM) Core Network (CN) subsystem

28、 based on the Session Initiation Protocol (SIP) and the Session Description Protocol (SDP). 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication,

29、 edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the l

30、atest version of that document in the same Release as the present document. 1 3GPP TS 23.002: “Network architecture“. 2 3GPP TS 24.229: “IP Multimedia Call Control Protocol based on SIP and SDP“. 3 ETSI EN 300 094 V2.1.1: “Integrated Services Digital Network (ISDN); Connected Line Identification Pre

31、sentation (COLP) supplementary service; Service description“. 4 ETSI ETS 300 095 (January 1992): “Integrated Services Digital Network (ISDN); Connected Line Identification Restriction (COLR) supplementary service; Service description“. 5 IETF RFC 3323: “A Privacy Mechanism for the Session Initiation

32、 Protocol (SIP)“. 6 IETF RFC 3325: “Private Extensions to the Session Initiation Protocol (SIP) for Network Asserted Identity within Trusted Networks“. 7 IETF RFC 2396: “Uniform Resource Identifiers (URI): Generic Syntax“. 8 IETF RFC 3966: “The tel URI for Telephone Numbers“. 9 IETF RFC 3261: “SIP:

33、Session Initiation Protocol“. 10 Void. 11 IETF RFC 2806: “URLs for Telephone Calls“. 12 ITU-T Recommendation E.164: “The international public telecommunication numbering plan“. 13 ITU-T Recommendation I.210: “Principles of telecommunication services supported by an ISDN and the means to describe the

34、m“. 14 3GPP TS 23.228: “IP multimedia subsystem; Stage 2“. 15 3GPP TS 24.623: “Extensible Markup Language (XML) Configuration Access Protocol (XCAP) over the Ut interface for Manipulating Supplementary Services“. 16 Void 17 IETF RFC 4916: “Connected Identity in the Session Initiation Protocol (SIP)“

35、. ETSI ETSI TS 124 608 V13.0.0 (2016-01)73GPP TS 24.608 version 13.0.0 Release 1318 ETSI TS 183 008 V1.6.0: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services Terminating Identification Presentation (TIP) and Terminating

36、Identification Restriction (TIR); Protocol specification“. 19 3GPP TS 24.238: “Session Initiation Protocol (SIP) based user configuration; stage 3“. 20 IETF RFC 4825: “The Extensible Markup Language (XML) Configuration Access Protocol (XCAP)“. 3 Definitions and abbreviations 3.1 Definitions For the

37、purposes of the present document, the following terms and definitions apply: Call Session Control Function (CSCF): See 3GPP TS 23.002 1. dialog: See IETF RFC 3261 9. header: See IETF RFC 3261 9. header field: See IETF RFC 3261 9. identity information: all the information (IETF RFC 2806 11 / IETF RFC

38、 2396 7 / ITU-T Recommendation E.164 12) identifying a user, including trusted (network generated) and/or untrusted (user generated) addresses NOTE: Identity information takes the form of either a SIP URI (see IETF RFC 3261 9) or a “tel“ URI (see IETF RFC 3966 8). incoming initial request: all reque

39、sts intended to initiate either a dialog or a standalone transaction received from the served user Interconnection Border Control Function (IBCF): See 3GPP TS 24.229 2. method: See IETF RFC 3261 9. outgoing initial request: all requests intended to initiate either a dialog or a standalone transactio

40、n terminated by the served user provisional response: See IETF RFC 3261 9. public user identity: See 3GPP TS 23.228 14, subclause 4.3.3.2 and 3GPP TS 24.229 2. request: See IETF RFC 3261 9. response: See IETF RFC 3261 9. session: See IETF RFC 3261 9. (SIP) transaction: See IETF RFC 3261 9. supplemen

41、tary service: See ITU-T Recommendation I.210 13, clause 2.4. tag: See IETF RFC 3261 9. trusted identity information: network generated user public identity information ETSI ETSI TS 124 608 V13.0.0 (2016-01)83GPP TS 24.608 version 13.0.0 Release 133.2 Abbreviations For the purposes of the present doc

42、ument, the following abbreviations apply: AS Application Server CDIV Communication DIVersion CN Core Network CONF CONFerenceCS Circuit Switched CSCF Call Session Control Function HOLD communication HOLD IBCF Interconnection Border Control Function IFC Initial Filter Criteria IMS IP Multimedia Subsys

43、tem IP Internet Protocol ISDN Integrated Service Data Network MCID Malicious Communication IDentification OIP Originating Identification Presentation OIR Originating Identification Restriction PSTN Public Switch Telephone Network S-CSCF Serving-Call Session Control Function SIP Session Initiation Pr

44、otocol TIP Terminating Identification Presentation TIR Terminating Identification Restriction UE User Equipment XML Extensible Markup Language 4 Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) 4.1 Introduction The Terminating Identification Presentation

45、 (TIP) service provides the originating party with the possibility of receiving identity information in order to identify the terminating party. The network shall deliver the Terminating Identity to the originating party on communication acceptance regardless of the terminal capability to handle the

46、 information. The Terminating Identification Restriction (TIR) is a service offered to the connected party which enables the connected party to prevent presentation of the terminating identity information to originating party. 4.2 Description 4.2.1 General description The Terminating Identification

47、Presentation (TIP) service provides the originating party with the possibility of receiving trusted information in order to identify the terminating party. The Terminating Identification Restriction (TIR) is a service offered to the terminating party which enables the terminating party to prevent pr

48、esentation of the terminating identity information to originating party. ETSI ETSI TS 124 608 V13.0.0 (2016-01)93GPP TS 24.608 version 13.0.0 Release 134.3 Operational requirements 4.3.1 Provision/withdrawal 4.3.1.1 TIP provision/withdrawal The TIP service may be provided after prior arrangement wit

49、h the service provider or be generally available. The TIP service shall be withdrawn at the subscribers request or for administrative reasons. As a general operator policy a special arrangement may exist on a per subscriber basis or on a general behaviour basis whereby the terminating users identity information intended to be transparently transported by the network is not screened by the network. 4.3.1.2 TIR provision/withdrawal The TIR service, temporary mode, may be provided on a