ETSI TS 123 053-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Tandem Free Operation (TFO) Service description S.pdf

《ETSI TS 123 053-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Tandem Free Operation (TFO) Service description S.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 123 053-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Tandem Free Operation (TFO) Service description S.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 123 053 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Tandem Free Operation (TFO); Service description; Stage 2 (3GPP TS 23.053 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COM

2、MUNICATIONSRETSI ETSI TS 123 053 V14.0.0 (2017-04)13GPP TS 23.053 version 14.0.0 Release 14Reference RTS/TSGS-0423053ve00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Associa

3、tion but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print

4、versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a

5、 specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If

6、you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and m

7、icrofilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All righ

8、ts reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and o

9、wned by the GSM Association. ETSI ETSI TS 123 053 V14.0.0 (2017-04)23GPP TS 23.053 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publ

10、icly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI

11、 Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or

12、may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by the ETSI 3rdGeneration Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. Thes

13、e should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“

14、, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 05

15、3 V14.0.0 (2017-04)33GPP TS 23.053 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Main Concepts 6g35 TFO Architecture

16、and Transmission Mechanism . 6g35.1 TFO Access Interfaces and Reference Points . 6g35.2 General In-band Transmission Mechanism for TFO 7g35.3 High-Level Functions Required for TFO . 7g36 Model of operation . 8g36.1 Overview 8g36.2 TFO establishment phase . 8g36.2.1 Sending of TFO_REQ message by a BS

17、S 8g36.2.2 Monitoring of TFO_REQ by a BSS 9g36.3 Transparency of transmission equipments . 9g36.3.1 Local disabling 9g36.3.2 Transparency to TFO negotiation messages . 9g36.3.3 Transparency to TFO speech frames 9g36.4 Modification of speech codec . 10g36.4.1 Introduction. 10g36.4.2 Exchanged paramet

18、ers 10g36.4.3 Change of speech codec configuration in the BSS . 10g36.5 TFO operation 10g36.5.1 End to end delay . 10g36.5.2 Synchronisation between TRAUs . 10g36.5.3 Monitoring in TFO operation 11g36.5.4 DTX aspects 11g36.5.5 Error concealment . 11g36.5.6 Management of UFE bit . 11g36.5.7 Handover

19、management . 11g36.5.8 Other issues . 12g37 Compatibility Issues . 12g38 Interactions with Other Services 12g38.1 General . 12g38.2 Support of DTMF . 13g39 Operational Aspects . 13g3Annex A (informative): Change history . 14g3History 15g3ETSI ETSI TS 123 053 V14.0.0 (2017-04)43GPP TS 23.053 version

20、14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the

21、present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under

22、 change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 123 053 V14.0.0 (2017-04)53GPP TS 23.053 version

23、14.0.0 Release 141 Scope The present document defines the stage 2 service description for Tandem Free Operation (TFO) in and between GSM and UMTS. Tandem Free Operation applies only to speech calls. NOTE: The TFO principles are built so that they could be used as well by other systems other than GSM

24、 and UMTS. In analogy with ITU-T Recommendations I.130 2 and with reference to ITU-T Recommendations Q.65 VI.1 (Stage 2 of the method for the characterisation of services supported by an ISDN), the second stage of the following three-level structure is derived from a stage 1 service description. - S

25、tage 1 is an overall service description, from the service subscribers and users standpoints, that views the network as a single entity which provides services to the user. - Stage 2 identifies the functional capabilities and information flows needed to support the service described in stage 1. Furt

26、hermore, it identifies various possible physical locations for the functional capabilities. The output of Stage 2, which is signalling system independent, is used as an input to Stage 3, the design of signalling system and switching Recommendations. - Stage 3 defines the signalling system protocols

27、and switching functions needed to implement the service described in stage 2. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition numbe

28、r, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version

29、of that document in the same Release as the present document. 1 3GPP TR 01.04: “Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms“. 2 ITU-T Recommendations I.130 (1988): “Method for the characterization of telecommunication services supported by an ISDN and network ca

30、pabilities of an ISDN“. 3 3GPP TS 22.053: “Tandem Free Operation (TFO); Service Description - Stage 1“. 4 3GPP TS 48.060: “Digital cellular telecommunications system (Phase 2+); In-band control of remote transcoders and rate adaptors for full rate traffic channels“. 5 3GPP TS 48.061: “Digital cellul

31、ar telecommunications system (Phase 2+); In-band control of remote transcoders and rate adaptors for half rate traffic channels“. ETSI ETSI TS 123 053 V14.0.0 (2017-04)63GPP TS 23.053 version 14.0.0 Release 143 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, t

32、he following terms and definitions apply: Tandem Free Operation: corresponds to the Mobile-to-Mobile calls for which the speech is not transcoded two times but only one by the Mobile Stations For simplicity the term MS is also used when UE is meant for 3G systems. The same is valid for TRAU and TC a

33、nalogously. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: IPE: In Path Equipment TFO: Tandem Free Operation Further abbreviations used may be found in 3GPP TR 01.04 1. 4 Main Concepts In-band TFO aims to remove the speech coding and decoding done in t

34、he BSS in MS-to-MS calls in order to improve the perceived speech quality. In-band TFO is established after call set-up using in-band signalling. This signalling is therefore controlled by the TRAU. Using in-band signalling implies that the link between the TRAUs is transparent in the sense that the

35、 digital content of what is emitted by a TRAU is not modified. The so-called In Path Equipments must therefore be disabled or configured in such a way that the information (signalling and coded speech) required for Tandem Free is not altered. 5 TFO Architecture and Transmission Mechanism 5.1 TFO Acc

36、ess Interfaces and Reference Points The GSM BSS reference points for TFO are described in figure 1. GSM A interface reference point applies here with the exception that speech is not in the standard 64 kbit/s PCM format and between TFO TRAUs in-band signalling is used. For speech and in-band signall

37、ing the MSC is transparent. The UMTS core network reference points for TFO are described in figure 2. The UMTS Nb interface reference point applies here with the exception that speech is not in the standard 64 kbit/s PCM format and between TFO TRAUs in-band signalling is used. For speech and in-band

38、 signalling the Core Network is transparent. Additional transmission equipments are taken into account. These equipments are all those which can process the PCM signal between the two peer BSS, e.g. echo cancellers, DCME. The BSS to BSS transmission is then considered transparent provided no transmi

39、ssion equipment along the circuit do not modify the 1 or more LSB or these transmission equipments implement a TFO “transparency mode“. A specific signalling allows to remotely control in-band these equipments. BSS-MSC out-of-band signalling consists in this version of TFO of the normal BSSMAP signa

40、lling which carries the list of acceptable speech codec that may be used for the TFO negotiation mechanism. Use of TFO specific out-of-band mechanism is not foreseen in that version of the specification. ETSI ETSI TS 123 053 V14.0.0 (2017-04)73GPP TS 23.053 version 14.0.0 Release 14MS TRAUTRAUMSBTS

41、BTSBSCBSC MSC MSC64 kbit/s Speech Samples carrying- TFO Frames on the LSB containing- Compressed speech samples- Control bits- TFO Messages- Original PCM speech samples on the MSBIPE IPEAbis AbisA AFigure 1 TCUENode BRNCMSC ServerMGw64 kbit/s Speech Samples carrying- TFO Frames on the LSB containing

42、- Compressed speech samples- Control bits- TFO Messages- Original PCM speech samples on the MSBTCUENode B RNCMSC ServerMGwIPE IPEIuNbIu NbFigure 2 5.2 General In-band Transmission Mechanism for TFO In TFO establishment mode, one bit out of 16 LSB bits is regularly stolen of the 64 kbits/s circuit. T

43、his provides for a 0,5 kbits/s channel and has been selected so that the degradation on the speech quality is inaudible. In TFO established mode bit stealing takes place on the LSB bit/s (bit 8, 7 9-N; N=1: number of stolen LSB bits) on each PCM sample. The number N of stolen LSB bit/s depends on th

44、e codec type. This provides for a N*8 kbits/s channel that allows to carry vocoded speech in TFO frames. The contents of the “unstolen“ bits 1- (8-N) is normal A/-law information. 5.3 High-Level Functions Required for TFO The high level functions which apply to TFO are described hereafter. Not all t

45、hese functions need necessarily to be covered by the first description of TFO since some issues may be too complex to solve in an initial stage or at all. ETSI ETSI TS 123 053 V14.0.0 (2017-04)83GPP TS 23.053 version 14.0.0 Release 14The list of functions which are applicable to the BSS follows: - s

46、ignalling a request message (TFO_REQ) on the A interface that the TRAU supports TFO; - signalling an acknowledgement message (TFO_ACK) that the request message has been received from the peer entity; - monitoring request and acknowledgement messages on the A interface that the peer entity supports T

47、FO; - remote control of echo cancellers, DCME, .; - signalling of current speech codec with acknowledgement message; - signalling of speech codec capability with acknowledgement message; - change of current speech codec within the BSS (optional); - sending of TFO speech frames to the A interface; -

48、reception of TFO speech frames from the A interface; - conversion of a flow of TRAU frames into TFO speech frames; - conversion of a flow of TFO speech frames into TRAU frames. The following function applies to IPEs that may be along the 64 kbits/s circuit, such as DCME or echo cancellers equipments

49、: - monitoring of TFO negotiation messages; - repetition of LSB bit 8 one time out of 16 (TFO establishment mode, i.e. reproduce at the output of the IPE the detected message); - capability to go full or sub-64 kbit/s transparent mode and to resume normal operation based on TFO negotiation messages; - capability to monitor and alter TFO speech frame control information (optional); - capability to insert TFO negotiation messages (optional). No assumption is made currently on the interactions between call set-up as seen by the MSC and TFO. This means that