ETSI TS 122 220-2016 Universal Mobile Telecommunications System (UMTS) Service requirements for Home Node B (HNB) and Home eNode B (HeNB) (V13 0 0 3GPP TS 22 220 version 13 0 0 Rel.pdf

《ETSI TS 122 220-2016 Universal Mobile Telecommunications System (UMTS) Service requirements for Home Node B (HNB) and Home eNode B (HeNB) (V13 0 0 3GPP TS 22 220 version 13 0 0 Rel.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 122 220-2016 Universal Mobile Telecommunications System (UMTS) Service requirements for Home Node B (HNB) and Home eNode B (HeNB) (V13 0 0 3GPP TS 22 220 version 13 0 0 Rel.pdf（27页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Universal Mobile TelService requiremand H(3GPP TS 22.2TECHNICAL SPECIFICATION122 220 V13.0.0 (2016elecommunications System (rements for Home Node B (HNHome eNode B (HeNB) .220 version 13.0.0 Release 1316-01) (UMTS); HNB) 13) ETSI ETSI TS 122 220 V13.0.0 (2016-01)13GPP TS 22.220 version 13.

2、0.0 Release 13Reference RTS/TSGS-0122220vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Impor

3、tant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written

4、authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sh

5、ould be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following s

6、ervices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version

7、 shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registere

8、d for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 122 220 V13.0.0 (2016-01)23GPP TS 22.220 version

9、13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Inte

10、llectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, incl

11、uding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) h

12、as been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross

13、reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described

14、 in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 220 V13.0.0 (2016-01)33GPP TS 22.220 version 13.0.0 Release 13Contents Intellectual Property Rig

15、hts 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 General . 7g34.1 Description . 7g35 Common requirements for Home NodeB / Home eNodeB 7g35.1 HNB and HeNB

16、Installation, identification and location requirements . 7g35.2 OA 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third d

17、igit is incremented when editorial only changes have been incorporated in the document. Introduction In Rel-8, 3GPP has specified the basic functionalities for the support of Home Node B (HNB) and Home eNodeB (HeNB). The requirements for these basic functionalities were captured in TS 22.011. From R

18、el-9 onward, it has been agreed to consolidate all the requirements from Rel-8 and further requirements for HNB and HeNB in a new TS, which is this specification. ETSI ETSI TS 122 220 V13.0.0 (2016-01)63GPP TS 22.220 version 13.0.0 Release 131 Scope This specification defines the service requirement

19、s for the basic functionalities for the support of Home NodeB (HNB) and Home eNodeB (HeNB) jointly referred to as H(e)NB and the further functionalities that will enable the mobile operators to provide more advanced services as well as improving the user experience. 2 References The following docume

20、nts contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a no

21、n-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specificat

22、ions“. 2 Void 3 3GPP TS 22.246: “Multimedia Broadcast/Multicast Service (MBMS) user services; Stage 1“. 4 3GPP TS 22.101: “Service Aspects; Service Principles“. 5 TR-069 Amendment 2: “CPE WAN Management Protocol v1.1, Broadband Forum, viewable at http:/www.broadband-forum.org/technical/download/TR-0

23、69Amendment2.pdf 6 3GPP TS 25.304: “User Equipment (UE) procedures in idle mode and procedures for cell reselection in connected mode. 7 3GPP TS 36.304: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) procedures in idle mode“. 8 3GPP TS 22.115: “Service aspects; Charging an

24、d billing“. 9 3GPP TS 22.268: “Public Warning System (PWS) requirements“. 10 3GPP TS 22.011: “Service accessibility“. 11 3GPP TS 31.115: “Secured packet structure for (Universal) Subscriber Identity Mobule (U)SIM Toolkit applications“. 12 3GPP TS 31.116: “Remote APDU Structure for (U)SIM Toolkit app

25、lications“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1.

26、 Closed access mode: H(e)NB provides services only to its associated CSG members. Home based network: An IP based network in the same premises as, and is connected to, the H(e)NB. ETSI ETSI TS 122 220 V13.0.0 (2016-01)73GPP TS 22.220 version 13.0.0 Release 13Hybrid access mode: H(e)NB provides servi

27、ces to its associated CSG members and to non-CSG members. Open access mode: H(e)NB operates as a normal NodeB or eNodeB. HNB: A HNB is a Customer-premises equipment that connects a 3GPP UE over UTRAN wireless air interface to a mobile operator“s network using a broadband IP backhaul. HeNB: A HeNB is

28、 a Customer-premises equipment that connects a 3GPP UE over EUTRAN wireless air interface to a mobile operator“s network using a broadband IP backhaul. H(e)NB Gateway: H(e)NB Gateway is a mobile operator“s equipment (usually physically located on mobile operator premises) through which the H(e)NB ge

29、ts access to mobile operator“s core network. H(e)NB Hosting Party: A H(e)NB Hosting Party has a contractual relationship with the operator, related to the provision of access to the operator“s network via one or more H(e)NBs. NOTE: A H(e)NB Hosting Party is likely to have the billing relationship wi

30、th the operator. A H(e)NB Hosting Party will typically be the lead user in a household, but could be e.g. the corporate IT manager in an enterprise context. H(e)NB Subsystem: A H(e)NB Subsystem consists of the H(e)NB and the H(e)NB Gateway. 3.2 Abbreviations For the purposes of the present document,

31、 the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. CSG Closed Subscriber Group HNB Home NodeB HeNB Home eNodeB H(e)NB HNB and HeNB 4 General 4.1 Descri

32、ption Access to 3G and evolved 3G (EPS) services may be provided via UTRAN or E-UTRAN cellular base stations belonging to e.g. domestic, business, commercial enterprises. This type of access may be provided by the PLMN by means of HNB and HeNB (jointly referred to as H(e)NB). The H(e)NB provides ser

33、vices either only to a Closed Subscriber Group (CSG) or to other mobile subscribers too. The H(e)NB is connected to the mobile operator core network using IP via any suitable access technology. 5 Common requirements for Home NodeB / Home eNodeB 5.1 HNB and HeNB Installation, identification and locat

34、ion requirements - H(e)NB shall have a unique equipment identity. - All the H(e)NBs serving the same CSG share the same unique (within the PLMN) identity called CSG Identity. ETSI ETSI TS 122 220 V13.0.0 (2016-01)83GPP TS 22.220 version 13.0.0 Release 13NOTE: CSGs of different PLMNs are considered d

35、ifferent, even if the PLMNs are indicated to the UE as “equivalent PLMNs“ 10. - It shall be possible to support at least 125 million CSG Identities within a PLMN of an operator. - The radio transmitter of a H(e)NB shall not be activated until configured and authorised by the operator. - When install

36、ing, provisioning, configuring or re-configuring an H(e)NB the operator shall be able to: - verify the H(e)NBs identity. - obtain the geographical location of the H(e)NB. NOTE: The scenario where a H(e)NB is connected to one operator“s network and later changed to another operator“s network is not r

37、equired. - The operator shall be able to determine that the H(e)NB is installed and operated in accordance with all relevant regulatory requirements. - The operator shall be able to configure the settings of the H(e)NB. In the case where the H(e)NB has detrimental impact on the spectrum usage, the H

38、(e)NB can be set to out-of-service by the operator. - Installation and activation of a new H(e)NB shall require no reconfiguration of the operators network. - The impact of H(e)NB on the core network should be minimised. 5.2 OA this allows a maximum length of 48 characters coded on one byte, 24 char

39、acters on two bytes, 16 characters on 3 bytes down to a minimum of 12 characters if all characters are encoded on 4 bytes. - If available and depending on operator preferences a HNB Name may be stored together with the associated CSG Identity in the UE“s Operator CSG List. - If available and dependi

40、ng on operator preferences a HNB Name may be stored together with the associated CSG Identity in the UE“s Allowed CSG List. - A HNB Name present in the Operator CSG list shall take precedence over a HNB Name present in the Allowed CSG list, which in turn shall take precedence over the broadcasted HN

41、B Name. NOTE 2: The UE“s Operator CSG List and Allowed CSG List are stored on the USIM or, optionally, in the ME as specified in section 5.3.2. NOTE 3: The HNB Name is necessary in order to aid the user in choosing the correct CSG identity when performing a manual CSG identity selection. ETSI ETSI T

42、S 122 220 V13.0.0 (2016-01)113GPP TS 22.220 version 13.0.0 Release 135.5 Mobility Aspects for Home NodeB and Home eNodeB 5.5.1 PLMN selection The standard automatic and manual network selection procedures are used to register a UE on a PLMN via a H(e)NB. 5.5.2 Idle-mode operation In addition to norm

43、al cell reselection procedures, the following requirements apply: - It shall be possible to support idle mode mobility between a H(e)NB cell and other cells and between H(e)NB cells. - A UE in idle mode shall prefer to select a cell whose CSG Identity is in the UE“s Allowed CSG List or in the Operat

44、or CSG list, when the cell reselection criteria has been met. NOTE: All CSG identities on the Allowed CSG list and the Operator CSG list have the same priority. - The cell reselection procedure should not result in excessive power consumption in the UE. 5.5.3 Connected mode operation - It shall be p

45、ossible to support service continuity, including handover, between a H(e)NB cell and other cells and between H(e)NB cells. This includes H(e)NB cells in residential and enterprise environment. - For operational and deployment purposes, handovers between a H(e)NB cell and other cells and between H(e)

46、NB cells should not significantly increase mobility related signalling. - Data session(s) may be terminated by the network after the UE leaves the H(e)NB coverage area on a per UE basis (e.g. based on subscriber tariff change). 5.5.4 Manual CSG selection The user shall be able to request the UE to p

47、erform a scan for available CSGs. When such request is received the UE shall perform a scan of available CSGs, their CSG Identities and their HNB Names. In the UE display, the available CSGs shall be represented by their associated HNB Names and PLMN Name(s). If the HNB Name is not available, the CS

48、G Identity shall be displayed instead. An indication shall be given to the user as to which of the available CSGs is contained in the Allowed CSG List or Operator CSG list. The available CSGs shall be displayed in the following order: - The CSGs, whose CSG Identities are contained in the Allowed CSG

49、 list. - The CSGs, whose CSG Identities are contained in the Operator CSG List. - Any other CSG, whose CSG Identity is not included in the Allowed CSG List or the Operator CSG list. The HPLMN shall configure, on a PLMN basis, the UE to display the available CSGs so that either: - all CSGs are displayed, or - only CSGs in the Operator CSG List are displayed. NOTE: It is assumed that OMA DM/OTA will be used by the HPLMN to configure the ME/USIM By default, the UE shall display all available CSGs for any PLMN, unless the UE ha