ETSI TS 100 916-2003 Digital Cellular Telecommunications System (Phase 2+) AT Command Set for GSM Mobile Equipment (ME)《数字蜂窝通信系统(第2+阶段) GSM移动设备(ME)的AT命令集3GPP TS 07 07(版本7 8 0 1998年.pdf

《ETSI TS 100 916-2003 Digital Cellular Telecommunications System (Phase 2+) AT Command Set for GSM Mobile Equipment (ME)《数字蜂窝通信系统(第2+阶段) GSM移动设备(ME)的AT命令集3GPP TS 07 07(版本7 8 0 1998年.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 100 916-2003 Digital Cellular Telecommunications System (Phase 2+) AT Command Set for GSM Mobile Equipment (ME)《数字蜂窝通信系统(第2+阶段) GSM移动设备(ME)的AT命令集3GPP TS 07 07(版本7 8 0 1998年.pdf（126页珍藏版）》请在麦多课文档分享上搜索。

1、ETSI TS 1 O0 91 6 V7.8.0 (2003-03) Technical Specificafion Digital cellular telecommunications system (Phase 2+); AT Command set for GSM Mobile Equipment (ME) (3GPP TS 07.07 version 7.8.0 Release 1998) 3GPP TS 07.07 version 7.8.0 Release 1998 1 ETSI TS 100 916 V7.8.0 (2003-03) Reference RTS/TSGT-020

2、707780 Keywords GSM ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the

3、present document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In

4、case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this

5、 and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction

6、extend to reproduction in all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the be

7、nefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3GPP TS 07.07 version 7.8.0 Release 1998 2 ETSI TS 100 916 V7.8.0 (2003-03) Intellectual Property Rights IPRs essential or potentially essential to the present

8、 document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respec

9、t ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This Technical Specification (TS) has been produ

10、ced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference bet

11、ween GSM, UMTS, 3GPP and ETSI identities can be found under ht tn : Nweb ann. et si. og;kev/aiiervfom. asn . ETSI 3GPP TS 07.07 version 7.8.0 Release 1998 3 ETSI TS 100 916 V7.8.0 (2003-03) Contents Intellectual Property Rights 2 Foreword . 2 Foreword . 7 Introduction 7 1 2 3 3.1 3.2 4 4.1 4.2 4.3 5

12、 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 6.15 6.16 6.17 6.18 6.19 6.20 6.21 6.22 6.23 7 7.1 7.2 Scope 8 References 8 Abbreviations and definitions 10 Abbreviations . 10 Definitions 11 AT command syntax 11 Command line 12 Information res

13、ponses and result codes 12 ITU-T V.25ter 14 TE-TA interface commands . 13 General commands . 13 Request manufacturer identification +CGMI . 13 Request model identification +CGMM 14 Request revision identification +CGMR 14 Request product serial number identification +CGSN . 16 Select TE character se

14、t +CSCS 16 Request internation 17 Multiplexing mode 17 ITU-T V.25ter 14 19 PCCA STD-101 17 select wireless network +WS46 19 Informative examples 20 Call control commands and methods . 21 Select type of address +CSTA 21 ITU-T V.25ter 14 dial command D . 21 Direct dialling from phonebooks 22 Call mode

15、 +CMOD 23 Hangup call +CHUP . 23 Alternating mode call control method 24 Select bearer service type +CBST 26 Radio link protocol +CRLP 27 Service reporting control +CR 28 Extended error report +CEER 29 Cellular result codes +CRC 29 HSCSD device parameters +CHSD . 30 HSCSD transparent call configurat

16、ion +CHST 31 HSCSD non-transparent call configuration +CHSN 31 HSCSD current call parameters +CHSC 32 HSCSD parameters report +CHSR$(AT 32 33 34 35 37 HSCSD automatic user initiated upgradi Single numbering scheme +CSNS 34 Voice Hangup Control +CVHU $(AT W7)$ V . 120 rate adaption protocol +CV120 IT

17、U-T V.25ter 14 call control comm ITU-T V.25ter 14 d 37 Informative examples 37 Network service related commands . 38 Subscriber number +CNUM 38 Network registration +CREG . 39 ETSI 3GPP TS 07.07 version 7.8.0 Release 1998 4 ETSI TS 100 916 V7.8.0 (2003-03) 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12

18、7.13 7.14 7.15 7.16 7.17 7.18 7.19 7.20 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 8.11 8.12 8.13 8.14 8.15 8.16 8.17 8.18 8.19 8.20 8.21 8.22 8.23 8.24 8.25 8.26 8.27 8.28 8.29 8.30 8.3 1 8.32 8.33 8.34 8.35 8.36 8.37 9 9.1 9.2 Operator selection +COPS . 40 Facility lock +CLCK 41 Change password +C

19、PWD . 43 Calling line identification presentation +CLIP . 44 Calling line identification restriction +CLIR 45 Connected line identification presentation +COLP 46 Closed user group +CCUG . 46 Call forwarding number and conditions +CCFC 47 Call waiting +CCWA . 49 Call related supplementary services +C

20、HLD . 50 Call deflection +CTFR . 51 Unstructured supplementary service data +CUSD 51 Advice of Charge +CAOC 53 Supplementary servic 53 Read operator names 57 Informative examples 57 Mobile Equipment control and status commands 59 Phone activity status +CPAS 60 Set phone functionality +CFUN . 60 Ente

21、r PIN +CPIN . 61 Battery charge +CBC . 62 Signal quality +CSQ . 63 Mobile Equipment control mode +CMEC . 63 Keypad control +CKPD . 64 Display control +CDIS . 65 Indicator control +CIND 66 Mobile Equipment event reporting +CMER 67 Select phonebook memory storage +CPBS 68 Read phonebook entries +CPBR

22、69 Find phonebook entries +CPBF . 70 Write phonebook entry +CPBW 71 Clock +CCLK 71 Alarm +CALA 72 Generic SIM access +CSI 73 Restricted SIM access +C 73 Secure control command + 74 75 Ringer sound level +CRSL $(AT R97)$ 76 Vibrator mode +CVIB $(AT R97)$ 76 77 77 78 Accumulated call meter maximum +CA

23、MM $(AT R97)$ 78 Price per unit and currency table +CPUC $(AT R97)$ 79 Call Meter maximum event +CCWE $(AT R98)$ 79 Power class +CPWC$(AT R98)$ 80 Set Language +CLAN$(AT R98)$ 81 Language Event +CLAE$(AT R98)$ 82 Set Greeting Text +CSGT$(AT R98)$ 82 Set Voice Mail Number +CSVM$(AT R98)$ . 83 Ring Me

24、lody Playback +CRMP$(AT R98)$ . 84 Master Reset +CMAR$(AT R98)$ 84 List all available AT commands +CLAC$(AT R98)$ . 85 Informative examples . 85 Mobile Equipment errors 89 Report Mobile Equipment error +CM 89 Mobile Equipment error result code 89 List current calls +CL 55 Preferred operator list 56

25、Alert sound mode +CALM $(AT R97)$ Mute control +CMUT $(AT R97)$ Accumulated call meter +CACM $( 9.2.1 General errors . 90 ETSI 3GPP TS 07.07 version 7.8.0 Release 1998 5 ETSI TS 100 916 V7.8.0 (2003-03) 9.2.2 GPRS-related errors 91 9.2.2.1 Errors related to a failure to perform an Attach 91 9.2.2.2

26、Errors related to a failure to Activate a Context 91 9.2.2.3 Other GPRS errors 91 9.3 Informative examples . 91 1 O Commands for GPRS . 92 10.1 Commands specific to MTs supporting the GPRS . 92 10.1.1 Define PDP Context +CGDCONT . 92 10.1.2 Quality of Service Profile (Requested) +CGQREQ 93 10.1.3 Qu

27、ality of Service Profile (Minimum acceptable) +CGQMIN . 95 10.1.4 GPRS attach or detach +CGATT 96 10.1.5 PDP context activate or deactivate +CGACT . 96 10.1.6 Enter data state +CGDATA 98 10.1.7 Configure local Octet Stream PAD parameters +CGCLOSP (Obsolete) . 99 10.1.8 Show PDP address +CGPADDR 99 1

28、0.1.9 Automatic response to a network request for PDP context activation +CGAUTO 100 10.1.10 Manual response to a network request for PDP context activation +CGANS 101 10.1.11 GPRS mobile station class +CGCLASS . 102 10.1.12 Configure local triple-X PAD parameters +CGCLPAD . 103 10.1.13 GPRS event r

29、eporting +CGEREP . 103 10.1.14 GPRS network registration status +CGREG 105 10.1.15 Select service for MO SMS messages +CGSMS 106 10.2 Modem compatibility commands . 106 10.2.1 MT originated PDP context activation 107 10.2.1.1 Request GPRS service D . 107 10.2.1.2 Request GPRS IP service D . 108 10.2

30、.2 Network requested PDP context activation 109 10.2.2.1 Automatic response to a network request for PDP context activation SO 109 10.2.2.2 Manual acceptance of a network request for PDP context activation A 109 10.2.2.3 Manual rejection of a network request for PDP context activation H . 109 Annex

31、A (normative): Summary of commands from other standards 110 Annex B (normative): Summary of result codes 112 . Annex C (informative): Commands from TIA IS-101 113 C . 1 Introduction 113 C.2 Commands 114 C.2.1 Select mode +FCLASS 114 C.2.2 Buffer threshold setting +VBT . 114 C.2.3 Calling number ID p

32、resentation +VCID 115 C.2.4 Receive gain selection +VGR 115 C.2.5 Transmit gain selection +VGT . 115 C.2.6 Initialise voice parameters +VIP 116 C.2.7 Inactivity timer +VIT . 116 C.2.8 Line selection +VLS . 116 C.2.9 Receive data state +VRX . 117 C.2.10 Select compression method +VSM 118 C.2.11 DTMF

33、and tone generation +VTS 118 C.2.12 Tone duration +VTD 119 C.2.13 Transmit data state +VTX 119 . . Annex D (informative): Bibliography . 120 Annex E (informative): Mobile originated alternating voice/data call example . 121 Annex F (informative): Mobile terminated voice followed by data call example

34、 . 122 Annex G (informative): Voice call example . 123 Annex H (informative): Change History 124 ETSI 3GPP TS 07.07 version 7.8.0 Release 1998 6 ETSI TS 100 916 V7.8.0 (2003-03) History 125 ETSI 3GPP TS 07.07 version 7.8.0 Release 1998 7 ETSI TS 100 916 V7.8.0 (2003-03) Foreword This Technical Speci

35、fication has been produced by the 3d Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modiSl the contents of the present document, it will be re-released by the TSG w

36、ith an identiSling change of release date and an increase in version number as follows: Version 7.x.y where: 7 indicates Release 1998 of GSM Phase 2+. x the second digit is incremented for all other types of changes, i.e. technical enhancements, corrections, updates, etc. y the third digit is increm

37、ented when editorial only changes have been incorporated in the specification. I n t rod uct ion The present document includes some features which are new to this release 98 version GSM 07.07. In order to make it easier for readers of the present document to find these new features compared to the r

38、elease 96 version, special markers are used in the text. The following table lists all the new release 97 and release 98 features and the corresponding marker for each feature. I Feature I Desianator I ETSI 3GPP TS 07.07 version 7.8.0 Release 1998 8 ETSI TS 100 916 V7.8.0 (2003-03) TE 1 TA NE ATcmdc

39、 NEcontrol , Scope The present document specifies a profile of AT commands and recommends that this profile be used for controlling Mobile Equipment (ME) functions and GSM network services from a Terminal Equipment (TE) through Terminal Adaptor (TA). The command prefix +C is reserved for Digital Cel

40、lular in ITU-T Recommendation V.25ter 14. The present document has also the syntax details used to construct these extended GSM commands. Commands from ITU-T Recommendation V.25ter 14 and existing digital cellular standards (TIA IS-99 15 and TIA IS-135 16) are used whenever applicable. Some of the n

41、ew commands are defined in such a way that they can be easily applied to ME of networks other than GSM. ITU-T T.3 1 1 i and T.32 121 fax AT commands may be used for GSM fax transmission from TE. GSM Short Message Service AT commands are defined in GSM 07.05 24. GPRS AT commands are defiied in clause

42、 10 of the present document.The present document assumes an abstract architecture comprising a TE (e.g. a computer) and a ME interfaced by a TA (see figure 1). The span of control of the defined commands should allow to handle any physical implementation that this abstract architecture may lead to:

43、- - - - TA, ME and TE as three separate entities; TA integrated under the ME cover, and the TE implemented as a separate entity; TA integrated under the TE cover, and the ME implemented as a separate entity; TA and ME integrated under the TE cover as a single entity. The commands described in the pr

44、esent document may be observed on the link between the TE and the TA. However, most of the commands retrieve information about the ME, not about the TA. 6 N- Figure I: Setup Interface between TE and TA is intended to operate over existing serial (ITU-T Recommendation V.24) cables, infrared link, and

45、 all link types with similar behaviour. For correct operation many of the defined commands require eight bit data and therefore it is recommended that TE-TA link is set to eight bits/ byte mode. (For infrared operation implementation refer informative references IrDA. For embedding AT commands and d

46、ata during on-line data state refer TIA-617/ITU-T V.80.) Interface between TA and ME is dependent on the interface in the ME. 2 Re fe re nces The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specifi

47、c (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific

48、 reference implicitly refers to the latest version of that document in the same Release as theyresent document. il GSM 02.02: “Digital cellular telecommunication system (Phase 2+); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN)“. ETSI 3GPP TS 07.07 version 7.8.0 Release 19

49、98 9 ETSI TS 100 916 V7.8.0 (2003-03) 31 41 51 71 91 GSM 02.03 : “Digital cellular telecommunication system (Phase 2+); Teleservices supported by a GSM Public Land Mobile Network (PLMN)“. GSM 02.8 1 : “Digital cellular telecommunication system (Phase 2+); Line identification supplementary services - Stage 1“. GSM 02.82: “Digital cellular telecommunication system (Phase 2+); Call Forwarding (CF) supplementary services - Stage 1“. GSM 02.83: “Digital cellular telecommunication system (Phase 2+); Call Waiting (CW) and Call Hold (HOLD) supp