ETSI EN 301 908-6-2011 IMT cellular networks Harmonized EN covering the essential requirements of article 3 2 of the R&TTE Directive Part 6 CDMA TDD (UTRA TDD) User Equipment (UE) .pdf

《ETSI EN 301 908-6-2011 IMT cellular networks Harmonized EN covering the essential requirements of article 3 2 of the R&TTE Directive Part 6 CDMA TDD (UTRA TDD) User Equipment (UE) .pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 908-6-2011 IMT cellular networks Harmonized EN covering the essential requirements of article 3 2 of the R&TTE Directive Part 6 CDMA TDD (UTRA TDD) User Equipment (UE) .pdf（47页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 301 908-6 V5.2.1 (2011-07)Harmonized European Standard IMT cellular networks;Harmonized EN covering the essential requirementsof article 3.2 of the RPart 6: CDMA TDD (UTRA TDD) User Equipment (UE)ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 2Reference REN/MSG-TFES-010-6 Keywords 3G, 3GPP, cellul

2、ar, digital, IMB, IMT, IMT-2000, MBSFN, mobile, radio, regulation, TD-CDMA, TDD, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de

3、Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, t

4、he reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision

5、 or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp C

6、opyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Tra

7、de Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 908-6 V5.2.1 (2011-

8、07) 3Contents Intellectual Property Rights 6g3Foreword . 6g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 9g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 10g33.3 Abbreviations . 11g34 Technical requirements specifi

9、cations . 11g34.1 Environmental profile . 11g34.2 Conformance requirements 11g34.2.1 Introduction. 12g34.2.2 Spectrum emission mask 12g34.2.2.1 Definition 12g34.2.2.1.1 3,84 Mcps TDD option 12g34.2.2.1.2 1,28 Mcps TDD option 12g34.2.2.1.3 7,68 Mcps TDD option 12g34.2.2.2 Limits 13g34.2.2.2.1 3,84 Mc

10、ps TDD option 13g34.2.2.2.2 1,28 Mcps TDD option 13g34.2.2.2.3 7,68 Mcps TDD option 14g34.2.2.3 Conformance . 14g34.2.3 Transmitter spurious emissions . 14g34.2.3.1 Definition 14g34.2.3.2 Limits 14g34.2.3.2.1 3,84 Mcps TDD option 14g34.2.3.2.2 1,28 Mcps TDD option 15g34.2.3.2.3 7,68 Mcps TDD option

11、15g34.2.3.3 Conformance . 16g34.2.4 Maximum output power 16g34.2.4.1 Definition 16g34.2.4.2 Limits 16g34.2.4.3 Conformance . 16g34.2.5 Minimum transmit output power 16g34.2.5.1 Definition 16g34.2.5.2 Limits 16g34.2.5.2.1 3,84 Mcps TDD option 16g34.2.5.2.2 1,28 Mcps TDD option 16g34.2.5.2.3 7,68 Mcps

12、 TDD option 16g34.2.5.3 Conformance . 16g34.2.6 Receiver spurious emissions . 16g34.2.6.1 Definition 16g34.2.6.2 Limits 17g34.2.6.2.1 3,84 Mcps TDD option 17g34.2.6.2.2 1,28 Mcps TDD option 17g34.2.6.2.3 7,68 Mcps TDD option 17g34.2.6.3 Conformance . 18g34.2.7 Receiver blocking characteristics . 18g

13、34.2.7.1 Definition 18g34.2.7.2 Limits 18g3ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 44.2.7.2.1 3,84 Mcps TDD option 18g34.2.7.2.2 1,28 Mcps TDD option 19g34.2.7.2.3 7,68 Mcps TDD option 20g34.2.7.3 Conformance . 21g34.2.8 Receiver intermodulation characteristics 21g34.2.8.1 Definition and applicabili

14、ty . 21g34.2.8.2 Limits 21g34.2.8.2.1 3,84 Mcps TDD option 21g34.2.8.2.2 1,28 Mcps TDD option 21g34.2.8.2.3 7,68 Mcps TDD option 21g34.2.8.3 Conformance . 22g34.2.9 Receiver spurious response . 22g34.2.9.1 Definition 22g34.2.9.2 Limits 22g34.2.9.2.1 3,84 Mcps TDD option 22g34.2.9.2.2 1,28 Mcps TDD o

15、ption 22g34.2.9.2.3 7,68 Mcps TDD option 23g34.2.9.3 Conformance . 23g34.2.10 Receiver adjacent channel selectivity . 23g34.2.10.1 Definition 23g34.2.10.2 Limits 23g34.2.10.2.1 3,84 Mcps TDD option 23g34.2.10.2.2 1,28 Mcps TDD option 23g34.2.10.2.3 7,68 Mcps TDD option 24g34.2.10.3 Conformance . 24g

16、34.2.11 Out-of-synchronization handling of output power 24g34.2.11.1 Definition 24g34.2.11.2 Limit 24g34.2.11.2.1 3,84 Mcps TDD option 24g34.2.11.2.2 1,28 Mcps TDD option 25g34.2.11.2.3 7,68 Mcps TDD option 26g34.2.11.3 Conformance . 27g34.2.12 Transmitter adjacent channel leakage power ratio 28g34.

17、2.12.1 Definition 28g34.2.12.2 Limits 28g34.2.12.2.1 3,84 Mcps TDD option 28g34.2.12.2.2 1,28 Mcps TDD option 28g34.2.12.2.3 7,68 Mcps TDD option 28g34.2.12.3 Conformance . 28g35 Testing for compliance with technical requirements 29g35.1 Environmental conditions for testing . 29g35.2 Interpretation

18、of the measurement results 29g35.3 Essential radio test suites 30g35.3.1 Spectrum emission mask 30g35.3.1.1 Method of test . 30g35.3.1.1.1 Initial conditions 30g35.3.1.1.2 Procedure . 31g35.3.1.2 Test requirements 31g35.3.2 Transmitter spurious emissions . 31g35.3.2.1 Method of test . 31g35.3.2.1.1

19、Initial conditions 31g35.3.2.1.2 Procedure . 31g35.3.2.2 Test requirements 32g35.3.3 Maximum output power 32g35.3.3.1 Method of test . 32g35.3.3.1.1 Initial conditions 32g35.3.3.1.2 Procedure . 32g35.3.3.2 Test requirements 32g35.3.4 Minimum transmit output power 32g35.3.4.1 Method of test . 32g35.3

20、.4.1.1 Initial conditions 32g3ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 55.3.4.1.2 Procedure . 33g35.3.4.2 Test requirements 33g35.3.5 Receiver spurious emissions . 33g35.3.5.1 Method of test . 33g35.3.5.1.1 Initial conditions 33g35.3.5.1.2 Procedure . 34g35.3.5.2 Test requirements 34g35.3.6 Receiver

21、blocking characteristics . 35g35.3.6.1 Method of test . 35g35.3.6.1.1 Initial conditions 35g35.3.6.1.2 Procedure . 35g35.3.6.2 Test requirements 36g35.3.7 Receiver intermodulation characteristics 36g35.3.7.1 Method of test . 36g35.3.7.1.1 Initial conditions 36g35.3.7.1.2 Procedure . 36g35.3.7.2 Test

22、 requirements 36g35.3.8 Receiver spurious response . 36g35.3.8.1 Method of test . 36g35.3.8.1.1 Initial conditions 36g35.3.8.1.2 Procedure . 37g35.3.8.2 Test requirements 37g35.3.9 Receiver adjacent channel selectivity . 37g35.3.9.1 Method of test . 37g35.3.9.1.1 Initial conditions 37g35.3.9.1.2 Pro

23、cedure . 37g35.3.9.2 Test requirements 38g35.3.10 Out-of-synchronization handling of output power 38g35.3.10.1 Method of test . 38g35.3.10.1.1 Initial conditions 38g35.3.10.1.2 Procedure . 38g35.3.10.2 Test requirements 39g35.3.11 Transmitter adjacent channel leakage power ratio 39g35.3.11.1 Method

24、of test . 39g35.3.11.1.1 Initial conditions 39g35.3.11.1.2 Procedure . 39g35.3.11.2 Test requirements 40g3Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) 41g3Annex B (normative): Environmental profile . 43g3B.1 General . 43g3B.1.1 Introduction 43g3B.1.2 Temper

25、ature . 43g3B.1.3 Voltage . 43g3B.1.4 Test environment 44g3Annex C (informative): The EN title in the official languages . 45g3Annex D (informative): Bibliography . 46g3History 47g3ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 6Intellectual Property Rights IPRs essential or potentially essential to the pr

26、esent document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

27、respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence o

28、f other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present docum

29、ent has been produced by ETSI in response to mandate M/284 from the European Commission issued under Council Directive 98/34/EC i.1 (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present docume

30、nt are intended to included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC i.2. See article 5.1 of Directive 1999/5/EC i.2 for information on presumption of conformity and Harmonised Standards or parts th

31、ereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC i.2 are summarised in annex A. The present document is part 6 of a multi-part deliverable covering the essential requirements under article 3.2 of Directi

32、ve 1999/5/EC i.2 (R Part 2: “CDMA Direct Spread (UTRA FDD) User Equipment (UE)“; Part 3: “CDMA Direct Spread (UTRA FDD) Base Stations (BS)“; Part 4: “CDMA Multi-Carrier (cdma2000) User Equipment (UE)“; Part 5: “CDMA Multi-Carrier (cdma2000) Base Stations (BS)“; Part 6: “CDMA TDD (UTRA TDD) User Equi

33、pment (UE)“; Part 7: “CDMA TDD (UTRA TDD) Base Stations (BS)“; Part 8: “Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R Part 9: “Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of ar

34、ticle 3.2 of the R Part 10: “Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R Part 11: “CDMA Direct Spread (UTRA FDD) (Repeaters)“; Part 12: “Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential requirements

35、of article 3.2 of the R Part 13: “Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)“; ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 7Part 14: “Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)“; Part 15: “Evolved Universal Terrestrial Radio Access (E-UTRA FDD) (R

36、epeaters)“; Part 16: “Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R Part 17: “Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential require

37、ments of article 3.2 of the R Part 18: “E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)“; Part 19: “OFDMA TDD WMAN (Mobile WiMAX) TDD User Equipment (UE)“; Part 20: “OFDMA TDD WMAN (Mobile WiMAX) TDD Base Stations (BS)“; Part 21: “OFDMA TDD WMAN (Mobile WiMAX) FDD User Equipme

38、nt (UE)“; Part 22: “OFDMA TDD WMAN (Mobile WiMAX) FDD Base Stations (BS)“. National transposition dates Date of adoption of this EN: 4 July 2011 Date of latest announcement of this EN (doa): 31 October 2011 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 Apr

39、il 2012 Date of withdrawal of any conflicting National Standard (dow): 30 April 2013 Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R

40、1,28 Mcps UTRA TDD option user equipment for Releases 4, 5, 6, 7, 8 and 9; 7,68 Mcps UTRA TDD option user equipment for Releases 7, 8 and 9. For the case of IMB, only the 3,84 Mcps UTRA TDD option applies. The present document covers the provisions of Directive 1999/5/EC i.2 (R User Equipment (UE) r

41、adio transmission and reception (TDD) (3GPP TS 25.102 version 9.4.0 Release 9)“. ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 93 ETSI TS 134 108 (V9.2.0): “Universal Mobile Telecommunications System (UMTS); LTE; Common test environments for User Equipment (UE); Conformance testing (3GPP TS 34.108 version

42、 9.2.0 Release 9)“. 4 ETSI TS 134 109 (V9.2.0): “Universal Mobile Telecommunications System (UMTS); LTE; Terminal logical test interface; Special conformance testing functions (3GPP TS 34.109 version 9.2.0 Release 9)“. 5 ETSI TS 134 122 (V9.2.0): “Universal Mobile Telecommunications System (UMTS); T

43、erminal conformance specification; Radio transmission and reception (TDD) (3GPP TS 34.122 version 9.2.0 Release 9)“. 6 IEC 60068-2-1 (2007): “Environmental testing - Part 2-1: Tests - Test A: Cold“. 7 IEC 60068-2-2 (2007): “Environmental testing - Part 2-2: Tests - Test B: Dry heat“. 8 ETSI EN 301 9

44、08-1 (V5.2.1): “IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R A guide to the production of Harmonized Standards for application under the R Uncertainties in the measurement of mobile radio equipment characteristics“. 3 Definitions, symbols and abbre

45、viations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: chip rate: rate of “chips“ (modulated symbols after spreading) per second data rate: rate of the user information, which is transmitted over the Air Interface EXAMPLE: Output rate of the voi

46、ce codec. environmental profile: range of environmental conditions under which the equipment within the scope of the present document is required to comply with the provisions of the present document maximum output power: measure of the maximum power supported by the UE (i.e. the actual power as wou

47、ld be measured assuming no measurement error) in a bandwidth of at least (1 + ) times the chip rate of the radio access mode, where the period of measurement is a transmit timeslot excluding the guard period unless otherwise stated MBSFN-only UE: UE operable in receive mode only (for the purpose of

48、MBSFN reception) ETSI ETSI EN 301 908-6 V5.2.1 (2011-07) 10mean power: when applied to a CDMA modulated signal this is the power (transmitted or received) in a bandwidth of at least (1 + ) times the chip rate of the radio access mode, where the period of measurement is a transmit timeslot excluding

49、the guard period unless otherwise stated node B: logical node responsible for radio transmission/reception in one or more cells to/from the User Equipment nominal maximum output power: nominal power defined by the UE power class operating band: frequency range that is defined with a specific set of technical requirements, in which UTRA TDD operates NOTE: The operating band(s) for a UTRA TDD UE is declared by the manufacturer according to the designations in table 1-1. Operating bands for UTRA are designated with Roman numerals, while the correspon