ETSI EN 301 908-18-2014 IMT cellular networks Harmonized EN covering the essential requirements of article 3 2 of the R&TTE Directive Part 18 E-UTRA UTRA and GSM EDGE Multi-Standar.pdf

《ETSI EN 301 908-18-2014 IMT cellular networks Harmonized EN covering the essential requirements of article 3 2 of the R&TTE Directive Part 18 E-UTRA UTRA and GSM EDGE Multi-Standar.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 908-18-2014 IMT cellular networks Harmonized EN covering the essential requirements of article 3 2 of the R&TTE Directive Part 18 E-UTRA UTRA and GSM EDGE Multi-Standar.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 301 908-18 V7.1.2 (2014-07) IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) HARMONIZED EUROPEAN STANDARD ETSI ETSI EN 301 908-18 V7.1.2 (2014-07)2Reference REN/MS

2、G-TFES-011-18a Keywords 3G, 3GPP, cellular, digital, EDGE, E-UTRA, GSM, IMT, IMT-Advanced, IMT-2000, LTE, mobile, MSR, radio, regulation, UMTS, UTRA, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - N

3、AF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print v

4、ersions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a

5、specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find er

6、rors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as

7、authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2014. All rights reserved. DECTTM

8、, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Ass

9、ociation. ETSI ETSI EN 301 908-18 V7.1.2 (2014-07)3Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 8g32.2 Informative references 9g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g

10、33.2 Symbols 11g33.3 Abbreviations . 12g34 Technical requirements specifications . 13g34.1 Environmental profile . 13g34.2 Conformance requirements 13g34.2.1 Introduction. 13g34.2.2 Operating band unwanted emissions 15g34.2.2.1 Definition 15g34.2.2.2 Limits 16g34.2.2.2.1 Limits for Band Categories 1

11、 and 3 . 16g34.2.2.2.2 Limits for Band Category 2 . 20g34.2.2.2.3 Limits for GSM/EDGE single-RAT operation 25g34.2.2.2.4 Limits for protection of DTT . 25g34.2.2.2.5 Limits for co-existence with services in adjacent frequency bands . 25g34.2.2.3 Conformance . 26g34.2.3 Adjacent Channel Leakage power

12、 Ratio (ACLR) 26g34.2.3.1 Definition 26g34.2.3.2 Limits 26g34.2.3.2.1 E-UTRA limits 26g34.2.3.2.2 UTRA FDD limits . 26g34.2.3.2.3 UTRA TDD limits . 26g34.2.3.2.4 Cumulative ACLR requirement in non-contiguous spectrum . 27g34.2.3.3 Conformance . 28g34.2.4 Transmitter spurious emissions . 28g34.2.4.1

13、Limits 28g34.2.4.1.1 Spurious emissions 28g34.2.4.1.2 Additional spurious emissions requirement for BC2 . 28g34.2.4.1.3 Co-existence with other systems . 29g34.2.4.1.4 Protection of the BS receiver of own or different BS 30g34.2.4.2 Conformance . 31g34.2.5 Base station maximum output power 31g34.2.5

14、.1 Definition 31g34.2.5.2 Limits 31g34.2.5.3 Conformance . 31g34.2.6 Transmit intermodulation . 31g34.2.6.1 Definition 31g34.2.6.2 Limits 32g34.2.6.2.1 General limits 32g34.2.6.2.2 Additional limits (BC1 and BC2) 32g34.2.6.2.3 Additional limits (BC3) . 33g34.2.6.3 Conformance . 33g34.2.7 Receiver sp

15、urious emissions . 33g34.2.7.1 Definition 33g3ETSI ETSI EN 301 908-18 V7.1.2 (2014-07)44.2.7.2 Limits 34g34.2.7.2.1 General limits 34g34.2.7.2.2 Additional limits for BC2 34g34.2.7.3 Conformance . 34g34.2.8 In-band blocking . 34g34.2.8.1 Definition 34g34.2.8.2 Limits 35g34.2.8.2.1 General limits 35g

16、34.2.8.2.2 Additional BC3 blocking limits . 36g34.2.8.3 Conformance . 36g34.2.9 Out-of-band blocking 36g34.2.9.1 Definition 36g34.2.9.2 Limits 36g34.2.9.3 Conformance . 37g34.2.10 Receiver intermodulation characteristics 37g34.2.10.1 Definition 37g34.2.10.2 Limits 37g34.2.10.2.1 General intermodulat

17、ion limits 37g34.2.10.2.2 General narrowband intermodulation limits 38g34.2.10.2.3 Additional narrowband intermodulation limits for GSM/EDGE . 40g34.2.10.3 Conformance . 40g34.2.11 Narrowband blocking . 40g34.2.11.1 Definition 40g34.2.11.2 Limits 40g34.2.11.2.1 General limits 40g34.2.11.2.2 Addition

18、al limits for GSM/EDGE . 41g34.2.11.2.3 GSM/EDGE limits for AM suppression 41g34.2.11.3 Conformance . 41g35 Testing for compliance with technical requirements 41g35.1 Environmental conditions for testing . 41g35.2 Interpretation of the measurement results 41g35.3 Essential radio test suites 43g35.3.

19、1 Operating band unwanted emissions 43g35.3.1.1 Initial conditions . 43g35.3.1.2 Procedure 44g35.3.1.3 Test requirement . 44g35.3.2 Adjacent Channel Leakage power Ratio (ACLR) 44g35.3.2.1 Initial conditions . 44g35.3.2.2 Procedure 45g35.3.2.3 Test requirement . 45g35.3.3 Transmitter spurious emissio

20、ns . 45g35.3.3.1 Initial conditions . 45g35.3.3.2 Procedure 46g35.3.3.3 Test requirement . 46g35.3.4 Base station maximum output power 46g35.3.4.1 Initial conditions . 46g35.3.4.2 Procedure 46g35.3.4.3 Test requirement . 46g35.3.5 Transmit intermodulation . 47g35.3.5.1 Initial conditions . 47g35.3.5

21、.2 Procedure 47g35.3.5.2.1 General minimum requirement test procedure 47g35.3.5.2.2 Additional minimum requirement (BC1 and BC2) test procedure 48g35.3.5.2.3 Additional minimum requirement (BC3) test procedure . 49g35.3.5.3 Test requirement . 49g35.3.6 Receiver spurious emissions . 49g35.3.6.1 Initi

22、al conditions . 49g35.3.6.2 Procedure 50g35.3.6.3 Test requirement . 50g35.3.7 In-band blocking . 50g35.3.7.1 Initial conditions . 50g3ETSI ETSI EN 301 908-18 V7.1.2 (2014-07)55.3.7.2 Procedure 50g35.3.7.2.1 Procedure for general blocking 50g35.3.7.2.2 Procedure for additional BC3 blocking requireme

23、nt . 51g35.3.7.3 Test requirement . 51g35.3.8 Out-of-band blocking 51g35.3.8.1 Initial conditions . 51g35.3.8.2 Procedure 52g35.3.8.3 Test requirement . 52g35.3.9 Receiver intermodulation characteristics 52g35.3.9.1 Initial conditions . 52g35.3.9.2 Procedure 53g35.3.9.2.1 Procedure for general and n

24、arrowband intermodulation . 53g35.3.9.2.2 Procedure for additional narrowband intermodulation for GSM/EDGE . 53g35.3.9.3 Test requirement . 53g35.3.10 Narrowband blocking . 53g35.3.10.1 Initial conditions . 53g35.3.10.2 Procedure 54g35.3.10.2.1 Procedure for narrowband blocking 54g35.3.10.2.2 Proced

25、ure for additional narrowband blocking for GSM/EDGE . 54g35.3.10.2.3 Procedure for GSM/EDGE AM suppression . 54g35.3.10.3 Test requirement . 54g3Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) 55g3Annex B (normative): Base Station configurations . 57g3B.1 Rece

26、ption with multiple receiver antenna connectors and receiver diversity 57g3B.2 Duplexers . 57g3B.3 Power supply options . 57g3B.4 Ancillary RF amplifiers 57g3B.5 BS using antenna arrays . 58g3B.5.1 Receiver tests 58g3B.5.2 Transmitter tests . 59g3B.6 Transmission with multiple transmitter antenna co

27、nnectors 59g3B.7 BS with integrated Iuant BS modem 59g3Annex C (informative): Environmental profile specification . 60g3Annex D (informative): Bibliography . 61g3History 62g3ETSI ETSI EN 301 908-18 V7.1.2 (2014-07)6Intellectual Property Rights IPRs essential or potentially essential to the present d

28、ocument may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect

29、 of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other

30、 IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has

31、 been produced by ETSI in response to mandate M/284 issued from the European Commission under Directive 98/34/EC i.1 as amended by Directive 98/48/EC i.6. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of t

32、itles and references of Harmonized Standard under the Directive 1999/5/EC i.2. See article 5.1 of Directive 1999/5/EC i.2 for information on presumption of conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of the European Union.

33、The requirements relevant to Directive 1999/5/EC i.2 are summarized in annex A. The present document is part 18 of a multi-part deliverable. Full details of the entire series can be found in part 1 i.7. National transposition dates Date of adoption of this EN: 30 June 2014 Date of latest announcemen

34、t of this EN (doa): 30 September 2014 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 March 2015 Date of withdrawal of any conflicting National Standard (dow): 31 March 2016 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “sho

35、uld not“, “may“, “may not“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct ci

36、tation. Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R Universal Mobile Telecommunications System (UMTS); LTE; E-UTRA, UTRA and GSM/

37、EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing (3GPP TS 37.141 version 11.8.0 Release 11)“. 3 ETSI TS 125 104 (V11.8.0) (2014-01): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 11.8.0 Relea

38、se 11)“. 4 ETSI TS 125 105 (V11.6.0) (2014-01): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (TDD) (3GPP TS 25.105 version 11.6.0 Release 11)“. 5 ETSI TS 136 104 (V11.8.2) (2014-04): “LTE; Evolved Universal Terrestrial Radio Access (E-UTRA);

39、Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 11.8.2 Release 11)“. 6 ETSI TS 145 005 (V11.4.0) (2014-01): “Digital cellular telecommunications system (Phase 2+); Radio transmission and reception (3GPP TS 45.005 version 11.4.0 Release 11)“. 7 Void. 8 ETSI EN 301 908-3 (V6

40、.2.1) (2013-10): “IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)“. 9 ETSI EN 301 908-7 (V5.2.1) (2011-07): “IMT cellular networks; Harmonized EN covering the essential requirements of article 3

41、.2 of the R Part 7: CDMA TDD (UTRA TDD) Base Stations (BS)“. 10 ETSI EN 301 908-14 (V6.2.1) (2013-10): “IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)“. 11 ETSI EN 301 50

42、2 (V11.1.1) (2014-07): “Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R Universal Mobile Telecommunications System (UMTS); LTE; E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS)

43、radio transmission and reception (3GPP TS 37.104 version 11.8.0 Release 11)“. 13 ETSI TS 136 141 (V11.8.0) (2014-04): “LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 11.8.0 Release 11)“. 14 ETSI TS 125 141 (V11.8.0) (2014-04):

44、“Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 11.8.0 Release 11)“. 15 ETSI TS 125 142 (V11.3.0) (2013-07): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (TDD) (3GPP TS 25.142 version

45、 11.3.0 Release 11)“. 16 ETSI TS 151 021 (V11.4.0) (2013-10): “Digital cellular telecommunications system (Phase 2+); Base Station System (BSS) equipment specification; Radio aspects (3GPP TS 51.021 version 11.4.0 Release 11)“. ETSI ETSI EN 301 908-18 V7.1.2 (2014-07)92.2 Informative references The

46、following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of informatio

47、n in the field of technical standards and regulations. i.2 Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R A guide to the production of Harmonized Standard

48、s for application under the R Uncertainties in the measurement of mobile radio equipment characteristics“. i.6 Directive 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending Directive 98/34/EC laying down a procedure for the provision of information in the field of technic

49、al standards and regulations. i.7 ETSI EN 301 908-1 (V6.2.1) (2013-04): “IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R Part 1: Introduction and common requirements“. i.8 Recommendation ITU-R SM.329-12 (09/2012): “Unwanted emissions in the spurious domain“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: band category: group of operating bands for which the same MSR scenarios apply NOTE: