EN ISO 28781-2010 en Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment《石油和天然气工业 钻孔和生产设备 地下不渗透层阀门和相关设备》.pdf

《EN ISO 28781-2010 en Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment《石油和天然气工业 钻孔和生产设备 地下不渗透层阀门和相关设备》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 28781-2010 en Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment《石油和天然气工业 钻孔和生产设备 地下不渗透层阀门和相关设备》.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 28781:2010Petroleum and natural gasindustries Drilling andproduction equipment Subsurface barrier valvesand related equipment (ISO28781:2010)BS EN ISO 28781:2010 BRITIS

2、H STANDARDNational forewordThis British Standard is the UK implementation of EN ISO28781:2010.The UK participation in its preparation was entrusted to TechnicalCommittee PSE/17/-/4, Drilling and production equipment forpetroleum and natural gas industries.A list of organizations represented on this

3、committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 57552 5ICS 75.180.10Compliance with a British Standard cannot confer immunity fromlega

4、l obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2010.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 28781 August 2010 ICS 75.180.10 English Version Petro

5、leum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) Industries du ptrole et du gaz naturel - quipement de production et de forage - Vannes de barrage de subsurface et quipement associ (ISO 28781:2010) Erdl- und Erdgas

6、industrie - Bohrlochausrstung - Untertage-Formations-Absperrventile und Zubehr (ISO 28781:2010) This European Standard was approved by CEN on 9 July 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the st

7、atus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German).

8、 A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Cz

9、ech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EU

10、ROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 28781:2010: EBS EN ISO 28781:2010EN ISO 28781:2010 (E) 3 Foreword T

11、his document (EN ISO 28781:2010) has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,

12、petrochemical and natural gas industries” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be with

13、drawn at the latest by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulation

14、s, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, N

15、etherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 28781:2010 has been approved by CEN as a EN ISO 28781:2010 without any modification. BS EN ISO 28781:2010ISO 28781:2010(E) ISO 2010 All rights rese

16、rved iiiContents Page Foreword .v Introductionvi 1 Scope1 2 Normative references1 3 Terms and definitions .2 4 Abbreviated terms .7 5 Functional requirements.7 5.1 General .7 5.2 Functional characteristics9 5.3 Well parameters.10 5.4 Operational parameters 10 5.5 Environmental compatibility 10 5.6 C

17、ompatibility with related well equipment11 5.7 Optional requirements 11 6 Technical specification.11 6.1 General .11 6.2 Technical characteristics12 6.3 Design criteria12 6.4 Materials .13 6.5 Performance envelope14 6.6 Design documentation14 6.7 Design verification 15 6.8 Design validation.15 6.9 D

18、esign changes .15 6.10 Functional test .16 7 Supplier/manufacturer requirements 16 7.1 General .16 7.2 Documentation 16 7.3 Product identification18 7.4 Quality requirements.18 7.5 Material documentation 20 7.6 Additional processes 20 7.7 Traceability.20 7.8 Quality controls .20 7.9 Shear device val

19、idation.23 7.10 Assembly and functional test 24 7.11 Manufacturing nonconformities 24 8 Handling, storage and preparation for transport .24 9 Repair/redress .25 Annex A (informative) Applications overview26 Annex B (normative) Validation requirements for subsurface barrier valves29 Annex C (normativ

20、e) Functional testing.37 Annex D (normative) Validation requirements for subsurface-barrier-valve tools39 Annex E (normative) Performance envelopes .41 BS EN ISO 28781:2010ISO 28781:2010(E) iv ISO 2010 All rights reservedAnnex F (informative) Alternate barrier liquid leakage test acceptance criteria

21、 43 Annex G (informative) Debris-settling design validation 44 Annex H (informative) Closure while flowing slurry test.46 Bibliography 47 BS EN ISO 28781:2010ISO 28781:2010(E) ISO 2010 All rights reserved vForeword ISO (the International Organization for Standardization) is a worldwide federation of

22、 national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Int

23、ernational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with t

24、he rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval

25、by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 28781 was prepared by Technical Committee I

26、SO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 4, Drilling and production equipment. BS EN ISO 28781:2010ISO 28781:2010(E) vi ISO 2010 All rights reservedIntroduction This International Standard has been developed by us

27、ers/purchasers and suppliers/manufacturers of subsurface barrier valves and related equipment as defined herein and is intended for use in the petroleum and natural gas industry worldwide to give requirements and information to both parties in the selection, manufacture, testing and use. Further, th

28、is International Standard addresses the minimum requirements with which the supplier/manufacturer is to comply so as to claim conformity with this International Standard. This International Standard has been structured with six different types of barrier valves. This differentiation is due to the ra

29、nge of product functionality, such as the direction in which pressure is held and its use in pre- or post-production/injection operations. This International Standard has been structured with grades of increased requirements in quality control and design validation. These grades allow the user/purch

30、aser to select the level of requirements that are required for a specific application. There are two quality grades: quality grade Q2 is the minimum grade of quality offered by this International Standard and quality grade Q1 is the highest grade provided. Additional quality requirements can be spec

31、ified by the user/purchaser as supplemental requirements. There are three design validation grades, which provide the user/purchaser with a choice of requirements to meet their preference or application. Design validation grade V3 is the minimum grade and V1 is the most stringent grade provided. Ann

32、exes B, C, D and E are normative requirements, where Annexes A, F, G and H are informative. The International System of Units (SI) is used in this International Standard, however US Customary (USC) or other units are also shown for reference. It is required that users of this International Standard

33、be aware that requirements beyond those outlined in this International Standard can be needed for individual applications. This International Standard is not intended to inhibit a supplier/manufacturer from offering, or the user/purchaser from accepting, alternative equipment or engineering solution

34、s. This can be particularly applicable where there is innovative or developing technology. Where an alternative is offered, it is the responsibility of the supplier/manufacturer to identify any variations from this International Standard and provide details. BS EN ISO 28781:2010INTERNATIONAL STANDAR

35、D ISO 28781:2010(E) ISO 2010 All rights reserved 1Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment 1 Scope This International Standard provides the requirements for subsurface barrier valves and related equipment as they are defin

36、ed herein for use in the petroleum and natural gas industries. Included are the requirements for design, design validation, manufacturing, functional evaluation, repair, redress, handling and storage. Subsurface barrier valves provide a means of isolating the formation or creating a barrier in the t

37、ubular to facilitate the performance of pre- and/or post-production/injection operational activities in the well. The subsurface barrier valve is not designed as an emergency or fail-safe flow controlling safety device. This International Standard does not cover installation and maintenance, control

38、 systems such as computer systems, and control conduits not integral to the barrier valve. Also not included are products covered under ISO 17078, ISO 16070, ISO 14310, ISO 10432, ISO 10423 and the following products: downhole chokes, wellhead plugs, sliding sleeves, casing-mounted flow-control valv

39、es, injection valves, well-condition-activated valves or drill-stem test tools. This International Standard does not cover the connections to the well conduit. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only

40、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection ISO 3601-1,

41、Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes ISO 3601-3, Fluid power systems O-rings Part 3: Quality acceptance criteria ISO 6506 (all parts), Metallic materials Brinell hardness test ISO 6508 (all parts), Metallic materials Rockwell hardness

42、 test ISO 9000, Quality management systems Fundamentals and vocabulary ISO 9712, Non-destructive testing Qualification and certification of personnel ISO 10414-1, Petroleum and natural gas industries Field testing of drilling fluids Part 1: Water-based fluids ISO 18265, Metallic materials Conversion

43、 of hardness values BS EN ISO 28781:2010ISO 28781:2010(E) 2 ISO 2010 All rights reservedAPI Manual of Petroleum Measurement Standards, Chapter 10 Sediment and Water Section 4: 1999, Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure)1)ASME Boiler and Pressure

44、Vessel Code (BPVC), Section II, Materials Specification Part D: Properties2)ASME, Boiler and Pressure Vessel Code (BPVC) Section VIII Rules for Construction of Pressure Vessels Division 1, UW-40: Procedures for Post-weld Heat Treatment ASME, Boiler and Pressure Vessel Code (BPVC) Section VIII: Divis

45、ion 1, Appendix 8: Methods for Liquid Penetrant Examination (PT) ASME, Boiler and Pressure Vessel Code (BPVC) Section IX: Welding and Brazing Qualifications ASTM E165, Standard Test Method for Liquid Penetrant Examination 3 Terms and definitions For the purposes of this document, the terms and defin

46、itions given in ISO 9000 and the following apply. 3.1 assembly (noun) product comprised of more than one component 3.2 ambient temperature prevailing temperature at test site 3.3 barrier obstacle or impediment to flow and/or pressure 3.4 base design design of a specified size, type and model of subs

47、urface barrier valve that has passed the requirements of Annex B and meets the requirements of this International Standard 3.5 batch-lot-traceable material or components having undergone the same process or series of processes and being traceable to one batch of material 3.6 casing pipe extending fr

48、om the surface and intended to line the walls of a drilled well 3.7 casing-mounted flow-control valves downhole valves permanently installed as a component of the casing or liner (pipe not extending from the surface and intended to line the walls of a drilled well) 1)American Petroleum Institute, 12

49、20 L Street NW, Washington, DC 20005-4070, USA. 2) American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990, USA. BS EN ISO 28781:2010ISO 28781:2010(E) ISO 2010 All rights reserved 33.8 city water water that is provided by the local water utility system and is unprocessed thereafter 3.9 common hardware non-critical nuts, bolts, set screws and spacers 3.10 design validation process of proving a design by testing to demonstrate conformity of the product to design requirement