EN ISO 15744-2008 en Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2)《手持非电动工具 噪声测量代码 工程法(2级)》.pdf

《EN ISO 15744-2008 en Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2)《手持非电动工具 噪声测量代码 工程法(2级)》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 15744-2008 en Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2)《手持非电动工具 噪声测量代码 工程法(2级)》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO15744:2008ICS 17.140.20; 25.140.01NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDHand-held non-electric power tools Noise measurementcode Engineeringmethod (grade 2) (ISO15744:2002)This British Standard was published under theauthority of the Standards

2、Policy and StrategyCommittee on 32008 BSI 2008ISBN 978 0 580 62584 8Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 15744:2008National forewordThis British Standard is the UK implementation of EN ISO 15744:2008.It is identical to ISO 15744:2002. It supersedes BS EN ISO 15744:200

3、2which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee MCE/8, Compressors, pneumatic tools, pneumatic machinesand vacuum technology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purp

4、ort to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.0 SeptemberEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 15744August 2008ICS 17.140.20; 25.140.01 Supers

5、edes EN ISO 15744:2002 English VersionHand-held non-electric power tools - Noise measurement code -Engineering method (grade 2) (ISO 15744:2002)Machines portatives moteur non lectrique - Code pour lemesurage du bruit - Mthode dexpertise (classe deprcision 2) (ISO 15744:2002)Handgehaltene nicht-elekt

6、risch betriebene Maschinen -Geruschmessverfahren - Verfahren derGenauigkeitsklasse 2 (ISO 15744:2002)This European Standard was approved by CEN on 18 July 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard th

7、e status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German

8、). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republ

9、ic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMA

10、LISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 15744:2008: EBS EN ISO 15744:2008EN ISO 15744:2008 (E) 3 Foreword The text of ISO 1

11、5744:2002 has been prepared by Technical Committee ISO/TC 118 “Compressors, pneumatic tools and pneumatic machines” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 15744:2008 by Technical Committee CEN/TC 255 “Hand-held, non-electric power tools - Safety

12、” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Atte

13、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 15744:2002. This document has been prepared under a mandat

14、e given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directives, see informative Annex ZA and ZB, which are integral part of this document. According to the CEN/CENELEC Internal Regulations

15、, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands

16、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 15744:2002 has been approved by CEN as a EN ISO 15744:2008 without any modification. BS EN ISO 15744:2008EN ISO 15744:2008 (E) 4 Annex ZA (informative) Relat

17、ionship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the Ne

18、w Approach Directive 98/37/EC on machinery, amended by 98/79/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard c

19、onfers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this sta

20、ndard. BS EN ISO 15744:2008EN ISO 15744:2008 (E) 5 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade

21、 Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member S

22、tate, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be app

23、licable to the product(s) falling within the scope of this standard. BS EN ISO 15744:2008ISO 15744:2002(E) ISO 2002 All rights reserved iiiContents Page Foreword.iv Introduction.v 1 Scope 1 2 Normative references1 3 Terms, definitions and symbols.2 4 Machinery families.5 4.1 Applicability of this In

24、ternational Standard 5 4.2 Other equipment 6 5 Sound power level determination 6 5.1 General6 5.2 Measurement surface6 5.3 Calculation .7 6 Emission sound pressure level determination.8 6.1 A-weighted emission sound pressure level at the work station 8 6.2 C-weighted peak emission sound pressure lev

25、el at the work station .9 7 Power tool installation and mounting during noise tests .9 7.1 General9 7.2 Loading devices.9 8 Loading and operating conditions.10 8.1 General10 8.2 Orbital and random orbital sanders.11 8.3 Non-rotary percussive tools.12 8.4 Needle scalers13 8.5 Rotary percussive tools1

26、4 8.6 Ratcheting screwdrivers, impact wrenches and impulse wrenches15 9 Measurement uncertainty .16 10 Information to be recorded.16 11 Test report 18 12 Declaration and verification of noise emission values18 Annex A (informative) Model test report.20 Annex B (informative) Model form for declared n

27、oise emission values21 Annex C (informative) Technical justification for selection of measurement surface and method of sound power calculation.22 Bibliography24 BS EN ISO 15744:2008ISO 15744:2002(E) iv ISO 2002 All rights reserved Foreword ISO (the International Organization for Standardization) is

28、 a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represen

29、ted on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are dr

30、afted in accordance with the rules given in the ISO/IEC Directives, Part 3. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International S

31、tandard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 157

32、44 was prepared by Technical Committee ISO/TC 118, Compressors, pneumatic tools and pneumatic machines, Subcommittee SC 3, Pneumatic tools and machines. Annexes A, B and C of this International Standard are for information only. BS EN ISO 15744:2008ISO 15744:2002(E) ISO 2002 All rights reserved vInt

33、roduction The noise test code presented by this International Standard gives methods for determining and declaring the noise emission values of hand-held non-electric power tools: i.e. the total noise level from the power tool expressed as sound power level and as the emission sound pressure level a

34、t the work station. These methods have been designed to give results that make it possible to compare the acoustic performance of various power tools. The power tools are either run at no load, when this gives a representative value, or in an on-load condition but with the process noise muffled so t

35、hat it is well below the noise level of the power tool. The methods were chosen to give a satisfactory reproducibility of results and are based on present practice in industry. For many power tools in a real work situation the noise from the process dominates the total noise emission in actual use.

36、The process noise varies within very wide limits and cannot be predicted. Users are cautioned that the emission sound pressure level as determined by this code may not be representative of actual operator exposure levels, which are unique characteristics of individual applications and environmental

37、factors beyond the control of the manufacturers of the equipment covered by this International Standard, and are under the exclusive control (and therefore the responsibility) of the users of the equipment. This International Standard was prepared with the assistance of both PNEUROP, the European bo

38、dy representing manufacturers of compressors, vacuum pumps, pneumatic tools, pneumatic machines and allied equipment, and CAGI, the compressed air and gas institute, in the United States. BS EN ISO 15744:2008BS EN ISO 15744:2008INTERNATIONAL STANDARD ISO 15744:2002(E) ISO 2002 All rights reserved 1H

39、and-held non-electric power tools Noise measurement code Engineering method (grade 2) 1 Scope This International Standard specifies methods for the measurement, determination and declaration of the noise emission from hand-held non-electric power tools. It prescribes the loading and working conditio

40、ns under which can be determined a) the noise emission, under specified load conditions, expressed as the sound power level, and b) the emission sound pressure level at the work station under specified load conditions. This International Standard is applicable to typical hand-held non-electric power

41、 tools including rotary tools, orbital and random orbital sanders, rotary and non-rotary reciprocating and percussive tools and a variety of assembly tools. It is not applicable to cartridge-operated tools, fastener driving tools (e.g. nailers, staplers) or any tool powered by an internal combustion

42、 engine, nor is it applicable to breakers or other power tools which, when placed on the market, are required to meet the provisions of legislation specifying test methods and imposing limits on noise emission from, for example, equipment used outdoors. NOTE This noise measurement code could also be

43、 applied to other equipment such as winches, pneumatic motors, auto-feed drills and tappers, pumps, hydraulic motors and screw feed systems, provided their principles of operation were in accordance with those of pneumatic and hydraulic equipment. 2 Normative references The following normative docum

44、ents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encour

45、aged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 278

46、7:1984, Rotary and percussive pneumatic tools Performance tests ISO 3744:1994, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane ISO 4871:1996, Acoustics Declaration and verification of noise em

47、ission values of machinery and equipment ISO 5391, Pneumatic tools and machines Vocabulary ISO 8662-2, Hand-held portable power tools Measurement of vibrations at the handle Part 2: Chipping hammers and riveting hammers ISO 8662-3, Hand-held portable power tools Measurement of vibrations at the hand

48、le Part 3: Rock drills and rotary hammers ISO 8662-7, Hand-held portable power tools Measurement of vibrations at the handle Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action ISO 8662-8, Hand-held portable power tools Measurement of vibrations at the handle Part 8

49、: Polishers and rotary, orbital and random orbital sanders BS EN ISO 15744:2008ISO 15744:2002(E) 2 ISO 2002 All rights reserved ISO 8662-14, Hand-held portable power tools Measurement of vibrations at the handle Part 14: Stone-working tools and needle scalers ISO 11203:1995, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level IEC 60651, Sound level meters IEC 60804, Integrating-averaging