EN 62683-2013 8178 Low-voltage switchgear and controlgear - Product data and properties for information exchange.pdf

《EN 62683-2013 8178 Low-voltage switchgear and controlgear - Product data and properties for information exchange.pdf》由会员分享，可在线阅读，更多相关《EN 62683-2013 8178 Low-voltage switchgear and controlgear - Product data and properties for information exchange.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationLow-voltage switchgear and controlgear Product data and properties for information exchangeBS EN 62683:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted withou

2、t license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62683:2013. It is identical to IEC 62683:2013.The UK participation in its preparation was entrusted by Technical Committee PEL/17, Switchgear, controlgear, and HV-LV co-ordination, to Subcommittee PEL/17/2,

3、Low voltage switchgear and controlgear.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards I

4、nstitution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 71662 1ICS 29.130.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2013.Amendments

5、/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62683:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62

6、683 NORME EUROPENNE EUROPISCHE NORM May 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitati

7、on in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62683:2013 E ICS 29.130.20 English version Low-voltage switchgear and controlgear - Product data and properties for information exchange (IEC 62683:2013) Appareillage basse tension - Donnes et proprits de produits po

8、ur lchange dinformations (CEI 62683:2013) Niederspannungsschaltgerte - Produktdaten und -eigenschaften fr den Informationsaustausch (IEC 62683:2013) This European Standard was approved by CENELEC on 2013-04-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipu

9、late the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This Europe

10、an Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC memb

11、ers are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Nor

12、way, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62683:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without lic

13、ense from IHS-,-,-EN 62683:2013 - 2 - Foreword The text of document 17B/1802/FDIS, future edition 1 of IEC 62683, prepared by SC 17B, “Low-voltage switchgear and controlgear“, of IEC TC 17, “Switchgear and controlgear“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 6268

14、3:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-01-15 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 20

15、16-04-15 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62683:2013 was

16、approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60715 NOTE Harmonised as EN 60715. IEC 60947-3 NOTE Harmonised as EN 60947-3. IEC 60947-4-2 NOTE Harmonised as EN 6094

17、7-4-2. IEC 60947-5-1:2003 NOTE Harmonised as EN 60947-5-1:2004 (not modified). IEC 60947-5-2:2007 NOTE Harmonised as EN 60947-5-2:2007 (not modified). IEC 60947-5-5:1997 + A1:2005 NOTE Harmonised as EN 60947-5-5:1997 + A1:2005 (not modified). IEC 60947-6-1:2005 NOTE Harmonised as EN 60947-6-1:2005 (

18、not modified). IEC 60947-6-2 NOTE Harmonised as EN 60947-6-2. IEC 60947-7-2:2009 NOTE Harmonised as EN 60947-7-2:2009 (not modified). IEC 60947-7-3:2009 NOTE Harmonised as EN 60947-7-3:2009 (not modified). IEC 60947-8 NOTE Harmonised as EN 60947-8. IEC 61095 NOTE Harmonised as EN 61095. IEC 61987-10

19、 NOTE Harmonised as EN 61987-10. ISO 13850:2006 NOTE Harmonised as EN ISO 13850:2008 (not modified). ISO 14025 NOTE Harmonised as EN ISO 14025. BS EN 62683:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or

20、 networking permitted without license from IHS-,-,- 3 - EN 62683:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable

21、 for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/

22、HD applies. Publication Year Title EN/HD Year IEC 60947-1 2007 Low-voltage switchgear and controlgear - Part 1: General rules EN 60947-1 2007 IEC 61360-1 - Standard data elements types with associated classification scheme for electric items - Part 1: Definitions - Principles and methods EN 61360-1

23、- BS EN 62683:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 62683 IEC:2013 CONTENTS INTRODUCTION . 7 1 Scope . 8 2 Normative references . 8 3 Terms

24、and definitions . 8 4 General 9 5 Properties . 9 5.1 Criteria for naming properties 9 5.2 Attributes of a property 9 6 Block of properties . 10 7 Device classes . 10 7.1 Device class attributes 10 7.2 Library of low-voltage switchgear and controlgear classes . 10 7.3 Properties of device classes 16

25、7.3.1 General . 16 7.3.2 Motor starter combination 17 7.3.3 Motor protection circuit-breaker . 18 7.3.4 Power contactor, a.c. switching . 19 7.3.5 Power contactor, d.c. switching . 20 7.3.6 Capacitor contactor . 22 7.3.7 Combination of contactors . 23 7.3.8 Electromechanical contactor for household

26、and similar purposes. 24 7.3.9 Thermal overload relay 25 7.3.10 Electronic overload relay . 26 7.3.11 Relay for thermistor protection (PTC) 27 7.3.12 Motor management device . 28 7.3.13 Motor management device, extension module . 29 7.3.14 Motor management device, operator panel 30 7.3.15 Semiconduc

27、tor motor controller . 31 7.3.16 Transfer switching equipment 32 7.3.17 Inductive proximity switch 32 7.3.18 Capacitive proximity switch 32 7.3.19 Non-mechanical magnetic proximity switch 32 7.3.20 Ultrasonic proximity switch 32 7.3.21 Through beam photoelectric proximity switch . 32 7.3.22 Retroref

28、lective photoelectric proximity switch 32 7.3.23 Diffuse reflective photoelectric proximity switch . 32 7.3.24 Diffuse reflective photoelectric proximity switch with background suppression . 32 7.3.25 Auxiliary contact block . 32 7.3.26 Contactor relay 33 7.3.27 Position switch 33 7.3.28 Rotary limi

29、t switch . 33 7.3.29 Safety position switch with separate actuator. 33 7.3.30 Safety position switch with interlocking 33 7.3.31 Trip wire switch . 33 BS EN 62683:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduc

30、tion or networking permitted without license from IHS-,-,-62683 IEC:2013 3 7.3.32 Hinge switch 33 7.3.33 Push-button . 33 7.3.34 Rotary control switch . 33 7.3.35 Key-operated rotary switch 33 7.3.36 Joy stick 33 7.3.37 Foot switch 33 7.3.38 Emergency stop device 33 7.3.39 Signal light 33 7.3.40 Sig

31、nal tower 33 7.3.41 Circuit-breaker . 34 7.3.42 Release for circuit-breaker 34 7.3.43 Residual current release for circuit-breaker . 34 7.3.44 Shunt release for circuit-breaker 34 7.3.45 Under-voltage release for circuit-breaker . 34 7.3.46 Motor-operator for circuit-breaker 34 7.3.47 Switch-disconn

32、ector 34 7.3.48 Switch-disconnector-fuse . 34 7.3.49 Fuse-switch-disconnector 34 7.3.50 Feed-through terminal block 34 7.3.51 Distribution terminal block . 34 7.3.52 Disconnect terminal block 34 7.3.53 Protective conductor terminal block . 34 7.3.54 Fuse terminal block . 34 Annex A (normative) Prope

33、rty library . 35 Annex B (informative) Example of structured data 50 Bibliography 52 Table 1 Library of blocks used in the device classes of low-voltage switchgear 10 Table 2 Library of device classes for contactors, starters and similar equipment 11 Table 3 Library of device classes for control swi

34、tches 13 Table 4 Library of device classes for circuit-breakers and their associated devices 15 Table 5 Library of device classes for switches, disconnectors and similar equipment . 16 Table 6 Library of device classes for multiple function equipment 16 Table 7 Library of device classes for terminal

35、 blocks 16 Table 8 Properties of motor starter combination . 17 Table 9 Properties of motor protection circuit-breaker 18 Table 10 Properties of power contactor, a.c. switching . 19 Table 11 Properties of power contactor, d.c. switching . 20 Table 12 Properties of capacitor contactor . 22 Table 13 P

36、roperties of combination of contactors . 23 Table 14 Properties of electromechanical contactor for household and similar purposes . 24 Table 15 Properties of thermal overload relay 25 Table 16 Properties of electronic overload relay. 26 Table 17 Properties of relay for thermistor protection . 27 Tab

37、le 18 Properties of motor management device 28 BS EN 62683:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 4 62683 IEC:2013 Table 19 Properties of motor

38、 management device, extension module 29 Table 20 Properties of motor management device, operator panel . 30 Table 21 Properties of semiconductor motor controller . 31 Table A.1 Library of properties used in the device classes of low-voltage switchgear and controlgear . 35 Table B.1 Structured proper

39、ties of motor starter combination . 50 BS EN 62683:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62683 IEC:2013 7 INTRODUCTION Mainly large customers a

40、nd wholesalers are requesting standardized product descriptions and product properties. However, all stakeholders will benefit from this standardised presentation and data exchange. Multiple associations or groups of actors launched different initiatives to try to respond to this demand but, due to

41、the lack of standardisation of classes and properties, the situation is not satisfactory neither for customers nor for manufacturers. In order to keep the lead of product description, IEC proposes a new consistent solution within its product standards. The purpose of this International Standard is t

42、o: define device classes and properties for low-voltage switchgear and controlgear in a dedicated standard, provide a basis for introduction of the low-voltage switchgear and controlgear classes and properties into the IEC 61360 database maintained by IEC/SC3D (see http:/std.iec.ch/iec61360). This s

43、tandard is not intended to establish a hierarchy of product classes called classification. The intended benefits of this standard are to: reduce the costs, time and efforts of mapping data for each customer request; optimize the workflow of B2B exchanges; minimize duplication of articles in customer

44、 inventories and in databases; minimize losses and misinterpretation of data during exchanges; facilitate the selection of a product, especially regarding reliability and safety; give access to product data everywhere regardless of country, language and culture; provide product data related to envir

45、onmental aspects such as material declaration; contribute to the fast growth of the e-business by simplifying the development of e-Catalogue allowing the differentiation of products performances, certificates, etc; e-Commerce: use of electronic networks to exchange information, products, services an

46、d payments for commercial and communication purposes between individuals (consumers) and businesses, between businesses themselves. The output of this standard consists of: reference dictionary of low-voltage switchgear and controlgear using existing terms from IEC standards. However, terminology us

47、ed in e-business may be relevant for the purpose of naming classes in this standard to get a high level of acceptance; properties for e-commerce purposes, conformity of properties with product standards being the main goal of this standard. NOTE The classes “under consideration“ are for information

48、only and are intended to be completed during the next maintenance cycle. For this project, the introduction of low-voltage switchgear and controlgear within the IEC 61360 database needs to address the following technical aspect: IEC 61360 requires mandatory attributes. The complete set of mandatory attributes with additional relevant attributes for low-voltage switchgear and controlgear will be available within the IEC 61360 database. Within the present document, only the most useful attributes will be present