EN 3773-004-2014 en Aerospace series - Circuit breakers single-pole temperature compensated rated currents 1 A to 25 A - Part 004 UNC thread terminals - Product standard《航空航天系列 断路器.pdf

《EN 3773-004-2014 en Aerospace series - Circuit breakers single-pole temperature compensated rated currents 1 A to 25 A - Part 004 UNC thread terminals - Product standard《航空航天系列 断路器.pdf》由会员分享，可在线阅读，更多相关《EN 3773-004-2014 en Aerospace series - Circuit breakers single-pole temperature compensated rated currents 1 A to 25 A - Part 004 UNC thread terminals - Product standard《航空航天系列 断路器.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 3773-004:2014Aerospace series Circuitbreakers, single-pole,temperature compensated,rated currents 1 A to 25 APart 004: UNC thread terminals ProductstandardBS EN 3773-004:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 3773-004

2、:2014.It supersedes BS EN 3773-004:1999 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This p

3、ublication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 83452 3ICS 49.060Compliance with a British Standard cannot confer immunity

4、fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments issued since publicationDate Text affectedBS EN 3773-004:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3773-004 October 2014 ICS 49.060

5、 Supersedes EN 3773-004:1999English Version Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard Srie arospatiale - Disjoncteurs unipolaires compenss en temprature, intensits nominales 1 A 25 A - Par

6、tie 004 : Bornes filetage UNC - Norme de produit Luft- und Raumfahrt - Schutzschalter, einpolig, temperaturkompensiert, Nennstrme von 1 A bis 25 A - Teil 004: UNC-Klemmengewinde - Produktnorm This European Standard was approved by CEN on 12 October 2013. CEN members are bound to comply with the CEN/

7、CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Cent

8、re or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the

9、 official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherl

10、ands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All right

11、s of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3773-004:2014 EBS EN 3773-004:2014EN 3773-004:2014 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Dimensions and mass .4 5 Characteristics .6 6 Desi

12、gnation . 11 7 Rated current code . 11 8 Delivery hardware codes . 11 9 Marking 12 10 Technical specification 12 BS EN 3773-004:2014EN 3773-004:2014 (E) 3 Foreword This document (EN 3773-004:2014) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-

13、STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the st

14、atus of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2015, and conflicting national standards shall be withdrawn at the latest by April 2015. Attention is drawn to the possibility that some of the elements of this document may be the subje

15、ct of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3773-004:1999. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement th

16、is European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak

17、ia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3773-004:2014EN 3773-004:2014 (E) 4 1 Scope This European Standard specifies the characteristics of single-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board ci

18、rcuits at a temperature between 55 C and 125 C and at an altitude of 22 000 m max. These circuit breakers are operated by a push-pull type single push button (actuator), with delayed action “trip-free“ tripping. They will continue to function up to the short-circuit current. 2 Normative references T

19、he following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2350,

20、 Aerospace series Circuit breakers Technical specification EN 2282, Aerospace series Characteristics of aircraft electrical supplies EN 3773-001, Aerospace series Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A Part 001: Technical specification EN 6113, Aerospace s

21、eries Circuit breaker, connecting and attachment hardware 1)TR 6083, Aerospace series Cut-outs for installation of electrical components 2)FED-STD-595B, Colors used in Government Procurement 3)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2350 apply

22、. 4 Dimensions and mass 4.1 Dimensional characteristics The circuit breakers do not have to correspond to the pictorial illustration, only the dimensions given shall be adhered to. See Figure 1. Dimensions are in millimetres with exception terminal thread 8-32 UNC. 1) Published as ASD-STAN Prestanda

23、rd at the date of publication of this standard. http:/www.asd-stan.org/ 2) Published as ASD-STAN Technical Report at the date of publication of this standard. http:/www.asd-stan.org/ 3) Published by: DoD National (US) Mil. Department of Defense. http:/www.defenselink.mil/ BS EN 3773-004:2014EN 3773-

24、004:2014 (E) 5 Key 1 Push button released 2 Black colour according to FED-STD-595B 3 White 4 Marking, see Clause 6. 5 Push button pressed 6 Attachment nut 7 Lock washer 8 1,0 max. to 3,0 max. 9 Positioning lug in accordance with the panel cut-out, as per TR 6083C202 10 Rated current marking (white o

25、n black) Figure 1 Circuit breaker BS EN 3773-004:2014EN 3773-004:2014 (E) 6 4.2 Electrical diagram See Figure 2. Push button released: CB open. Push button pressed: CB closed. Key 1 Supply 2 Load Load and supply can be inverted. Figure 2 Electrical diagram 4.3 Mass 26 g max. (delivery hardware code

26、A). 4.4 Panel mounting See EN 3773-001. 5 Characteristics 5.1 Material, surface treatment See EN 3773-001. 5.2 Mechanical characteristics 5.2.1 Fasteners See EN 6113. BS EN 3773-004:2014EN 3773-004:2014 (E) 7 5.2.2 Recommended tightening torque of attaching nut for installation (4,00 0,25) N.m 5.2.3

27、 Recommended tightening torque of connection hardware for installation (1,6 0,1) N.m 5.2.4 Resistance to vibrations 5.2.4.1 Combined test: ambient temperature at 70 C and vibrations Sinusoidal : 10 gn, see EN 3773-001. Random: 5,8 gn,see EN 3773-001. Low frequencies : 10 gn, see EN 3773-001. 5.2.4.2

28、 Combined test: ambient temperature at 85 C, altitude and vibrations Sinusoidal : 3 gn, see EN 3773-001. 5.2.5 Resistance to shocks 50 gn, see EN 3773-001. 5.2.6 Mechanical endurance See Table 6. 5.3 Environment characteristics 5.3.1 Humidity See EN 3773-001. 5.3.2 Corrosion See EN 3773-001. 5.3.3 C

29、ontaminating liquids See EN 3773-001. 5.3.4 Overvoltage caused by lightning See EN 3773-001. BS EN 3773-004:2014EN 3773-004:2014 (E) 8 5.4 Electrical characteristics 5.4.1 Nominal voltage of operational circuits See Table 1. Table 1 Nominal voltage 28 V d.c. 26 V a.c., frequency 400 Hz, single-phase

30、 115 V a.c., frequency 400 Hz, single-phase When using on a variable frequency aircraft power supply, according to EN 2282, limit values (for voltage and frequency) shall be specified. 5.4.2 Voltage drop at nand low current See Table 2. Table 2 Ratings A 1 2 2,5 3 5 7,5 10 15 20 25 U max. at n V 1,1

31、0 0,75 0,70 0,55 0,35 0,30 0,30 0,25 0,25 0,20 U max. at = 100mA mV 110 40 30 18 8 4 3 2,5 2,5 2,5 NOTE The test shall be performed when the contact is established (no switching). 5.4.3 Minimum and maximum tripping thresholds See Table 3. Table 3 Overload (in % of n) Ambient temperatures Ratings Min

32、imum thresholds value 1 h Maximum thresholds value 1 h C A On ground At 22 000 m On ground 23 5 All 115 105 140 55 5 115 105 160 70 5 105 100 140 125 5 100 80 140 BS EN 3773-004:2014EN 3773-004:2014 (E) 9 5.4.4 Overload trip See Table 4. Table 4 Overload (in % of n) 200 500 1 000 Ambient temperature

33、s C Ratings A Trip time s 23 5 1 to 3 2 to 13 0,15 to 2,50 0,035 to 0,600 5 to 15 4 to 18 20 to 25 6 to 20 55 5 All 40 125 5 1,5 5.4.5 Short-circuit values See Table 5. Table 5 Nominal voltage 28 V d.c. 115 V a.c., 400 Hz Prospective currents 65 nL/R 1 ms 0,8 cos 1 65 nor 1 000 A r.m.s. (value the m

34、ost favourable) Test altitudes On the ground and at maximum altitude 22 000 m (4 000 Pa) Number of operations 1 CO a+ 2 OCO b+ 1 CO + 2 OCO aRemoval of short-circuit. bApplication of a short-circuit.BS EN 3773-004:2014EN 3773-004:2014 (E) 10 5.4.6 No-Load and load endurance See Table 6. Table 6 Numb

35、er of operations to be provided No-load Load 5 000 2 500 2 500 2 500 2 500 All ratings Main contacts Applicable Resistive Low current 100 mA, 28 V d.c. (rating 3 A) Resistive n, 28 V d.c. Inductive L/R = 5 ms n, 28 V d.c. Inductive 0,6 cos 0,7 n, 115 V a.c. - 400 Hz NOTE 1 One operation corresponds

36、to one closing and one opening. NOTE 2 Tolerances 5 % on current, voltage and frequency values. 5.4.7 Dielectric rigidity See Table 7. Table 7 Closed position Z = 0 m Z = 22 000 m 1 and 2 with attachment 1 500 V 400 V Open position Z = 0 m Z = 22 000 m 1 with 2 1 and 2 with attachment 1 500 V 400 V

37、5.4.8 Insulation resistance 100 M (measurement points identical to dielectric rigidity points). 5.4.9 Overload endurance Not applicable. BS EN 3773-004:2014EN 3773-004:2014 (E) 11 6 Designation EXAMPLE Description block CIRCUIT BREAKER Identity block EN3773-004D20AA Number of this standard Design co

38、de, D: black button Rated current code (see Table 8) Delivery hardware code A (see Table 9) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 7 Rated current code See Table 8. Table 8 Ratings n1 2 2,5 3 5 7,5 10 15 20 25 Marking on actuator 1 2 2

39、 3 5 7 10 15 20 25 Rated current code 01A 02A 2A5 03A 05A 7A5 10A 15A 20A 25A 8 Delivery hardware codes See Table 9. Table 9 Delivery hardware code Connection and attachment hardware kits EN 6113 Delivery conditions Kit part-No. aIncluded parts Pieces per part Fitted Supplied separately A EN 6113A1

40、Connecting screw 2 X Connecting lock washer 2 Attachment nut 1 Attachment lock washer 1 B EN 6113B1 Attachment nut 1 X Attachment lock washer 1 aSpare parts could be ordered separately, informations see EN 6113.BS EN 3773-004:2014EN 3773-004:2014 (E) 12 9 Marking As defined on the drawing and unless

41、 otherwise specified by contract, marking shall include: the designation defined in Clause 6 (without delivery hardware code), on the packaging; the manufacture date (year, week): YYWW; the manufacturers name or trademark; the pin terminal identification; the manufacturers part number. NOTE The mark

42、ing could be combined on the both opposite faces. For electrical diagram and/or terminal identification refer to the Figure 1. 10 Technical specification See EN 3773-001. This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related

43、 publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business

44、, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of al

45、l sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowle

46、dge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development

47、Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over

48、 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and

49、 subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you ar