书签分享收藏举报版权申诉 / 16

立即下载加入VIP,交流精品资源

当前位置：首页 > 标准规范 > 国际标准 > 其他 > DLA MS8006 REV C (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARELESS-TO-FLARELESS《非耀斑对非耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf

DLA MS8006 REV C (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARELESS-TO-FLARELESS《非耀斑对非耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf

上传人：Iclinic170

文档编号：693863

上传时间：2018-12-30

格式：PDF

页数：16

大小：378.70KB

《DLA MS8006 REV C (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARELESS-TO-FLARELESS《非耀斑对非耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf》由会员分享，可在线阅读，更多相关《DLA MS8006 REV C (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARELESS-TO-FLARELESS《非耀斑对非耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 MS8006C w/AMENDMENT 1 09 September 2005 SUPERSEDING MS8006C 4 September 2003 DETAIL SPECIFICATION SHEET HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PERMANENTLY ATTACHED FITTINGS, HIGH TEMPERATURE, MEDIUM PRESSURE, FLARELESS-TO-FLARELESS This specification is approved for use by all Departments and Agen

2、cies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-25579. Hose assembly dimensions for style A: See table l. TABLE I. Hose assembly dimensions for style A. 1/ Fitting ends Dimensions 2/ 3/ 1 2 Hose size

3、 A (nom) B ( max) C (max) F (max) 3/4 0.191 1.282 0.620 0.580 4 0.222 1.222 0.620 0.6545 0.235 1.340 0.680 0.726 6 0.230 1.469 0.750 0.798Straight Straight 8 0.310 1.640 0.880 1.014 10 0.356 1.940 0.967 1.15812 0.393 1.913 1.122 1.447 16Z 0.429 2.298 1.480 1.73620Z 0.393 2.577 1.750 2.328 24Z 0.398

4、2.800 2.150 2.621INCH-POUND1/ Style A uses class 1 fittings which are made from corrosion resistant steel (CRES). 2/ Dimensions are shown on figure 1. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 1. Style A hose assembly. AMSC N/A FSC 4720 Source: http:/assist.daps.

5、dla.mil - Downloaded: 2005-10-05T07:15ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 2 Hose assembly dimensions for style B: See table II. TABLE II. Hose a

6、ssembly dimensions for style B. 1/ Fitting ends Dimensions 2/ 3/ 1 2 Hose size A (nom) B (max)C (max)D (max)E (max)F (max)G (min) G (max) 3/4 0.191 1.282 0.620 1.240 0.950 0.580 0.412 0.537 4 0.222 1.222 0.620 1.490 0.970 0.654 0.404 0.5295 0.235 1.340 0.680 1.495 1.017 0.726 0.428 0.553 6 0.230 1.4

7、69 0.750 1.610 1.122 0.798 0.506 0.631Straight 45 8 0.310 1.640 0.880 1.722 1.426 1.014 0.542 0.789 10 0.356 1.940 0.967 2.037 1.596 1.158 0.631 0.877 12 0.393 1.913 1.122 2.368 1.739 1.447 0.631 0.952 16Z 0.429 2.298 1.480 2.583 1.931 1.736 0.741 1.069 20Z 0.393 2.577 1.750 2.946 2.084 2.328 0.863

8、1.196 24Z 0.398 2.800 2.150 3.210 2.376 2.621 1.012 1.402 1/ Style B uses class 1 fittings which are made from CRES. 2/ Dimensions are shown on figure 2. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 2. Style B hose assembly. Source: http:/assist.daps.dla.mil - Downl

9、oaded: 2005-10-05T07:15ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 3 Hose assembly dimensions for style C: Seed table III. TABLE III. Hose assembly dime

10、nsions for style C. 1/ 1/ Style C uses class 1 fittings which are made from CRES. Fitting ends Dimensions 2/ 3/ 1 2 Hose size A (nom) B (max) C (max) F (max) H (max) J (max) K (min) K (max)3/4 0.191 1.282 0.620 0.580 1.845 1.350 0.721 0.846 4 0.222 1.222 0.620 0.654 1.885 1.370 0.705 0.830 5 0.235 1

11、.340 0.680 0.726 1.980 1.550 0.788 0.975 6 0.230 1.469 0.750 0.798 2.205 1.687 0.895 1.082 Straight 90 8 0.310 1.640 0.880 1.014 2.495 2.032 1.032 1.282 10 0.356 1.940 0.967 1.158 2.955 2.437 1.357 1.607 12 0.393 1.913 1.122 1.447 3.705 2.795 1.591 1.841 16Z 0.429 2.298 1.480 1.736 4.100 3.160 1.741

12、 1.991 20Z 0.393 2.577 1.750 2.328 4.835 3.664 2.021 2.396 24Z 0.398 2.800 2.150 2.621 5.480 4.251 2.403 2.778 2/ Dimensions are shown on figure 3. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 3. Style C hose assembly. Source: http:/assist.daps.dla.mil - Downloaded:

13、 2005-10-05T07:15ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 4 Hose assembly dimensions for style D: See table IV. TABLE IV. Hose assembly dimensions fo

14、r style D. 1/ 1/ Style D uses class 1 fittings which are made from CRES. Fitting ends Dimensions 2/ 3/ 1 2 Hose size A (nom) C (max) D (max) E (max) F (max) G (min) G (max) 3/4 0.191 0.620 1.240 0.950 0.580 0.412 0.537 4 0.222 0.620 1.490 0.970 0.654 0.404 0.529 5 0.235 0.680 1.495 1.017 0.726 0.428

15、 0.553 6 0.230 0.750 1.610 1.122 0.798 0.506 0.631 45 45 8 0.310 0.880 1.722 1.426 1.014 0.542 0.789 10 0.356 0.967 2.037 1.596 1.158 0.631 0.877 12 0.393 1.122 2.368 1.739 1.447 0.631 0.952 16Z 0.429 1.480 2.583 1.931 1.736 0.741 1.069 20Z 0.393 1.750 2.946 2.084 2.328 0.863 1.196 24Z 0.398 2.150 3

16、.210 2.376 2.621 1.012 1.402 2/ Dimensions are shown on figure 4. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 4. Style D hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-10-05T07:15ZCheck the source to verify that this is the current version befo

17、re use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 5 Hose assembly dimensions for style E: See table V. TABLE V. Hose assembly dimensions for style E. 1/ 1/ Style E uses class 1 fittings which are made from CRES. Dimensions

18、2/ 3/ Fitting ends 1 2 Hose size A (nom) C (max) D (max)E (max)F (max)G (min) G (max)H (max) J (max) K (min) K (max)3/4 0.191 0.620 1.240 0.950 0.580 0.412 0.537 1.845 1.350 0.721 0.8464 0.222 0.620 1.490 0.970 0.654 1.404 0.529 1.885 1.370 0.705 0.8305 0.235 0.680 1.495 1.017 0.726 0.428 0.553 1.98

19、0 1.550 0.788 0.9756 0.230 0.750 1.610 1.122 0.798 0.506 0.631 2.205 1.687 0.895 1.08245 90 8 0.310 0.880 1.722 1.426 1.014 0.542 0.789 2.495 2.032 1.032 1.28210 0.356 0.967 2.037 1.596 1.158 0.631 0.877 2.955 2.437 1.357 1.60712 0.393 1.122 2.368 1.739 1.447 0.631 0.952 3.705 2.795 1.591 1.84116Z 0

20、.429 1.480 2.583 1.931 1.736 0.741 1.069 4.100 3.160 1.741 1.99120Z 0.393 1.750 2.946 2.084 2.328 0.863 1.196 4.835 3.664 2.021 2.39624Z 0.398 2.150 3.210 2.376 2.621 1.012 1.402 5.480 4.251 2.403 2.7782/ Dimensions are shown on figure 5. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see req

21、uirements. FIGURE 5. Style E hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-10-05T07:15ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1

22、6 Hose assembly dimensions for style F: See table VI. TABLE VI. Hose assembly dimensions for style F. 1/ 1/ Style F uses class 1 fittings which are made from CRES. Fitting ends Dimensions 2/ 3/ 1 2 Hose size A (nom) C (max) F (max) H (max) J (max) K (min) K (max) 3/4 0.191 0.620 0.580 1.845 1.350 0.

23、721 0.846 4 0.222 0.620 0.654 1.885 1.370 0.705 0.830 5 0.235 0.680 0.726 1.980 1.550 0.788 0.975 6 0.230 0.750 0.798 2.205 1.687 0.895 1.082 90 90 8 0.310 0.880 1.014 2.495 2.032 1.032 1.282 10 0.356 0.967 1.158 2.955 2.437 1.357 1.607 12 0.393 1.122 1.447 3.705 2.795 1.591 1.841 16Z 0.429 1.480 1.

24、736 4.100 3.160 1.741 1.991 20Z 0.393 1.750 2.328 4.835 3.664 2.021 2.396 24Z 0.398 2.150 2.621 5.480 4.251 2.403 2.778 2/ Dimensions are shown on figure 6. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 6. Style F hose assembly. Source: http:/assist.daps.dla.mil - Do

25、wnloaded: 2005-10-05T07:15ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 7 Hose assembly dimensions for style G: See table VII. TABLE VII. Hose assembly di

26、mensions for style G. 1/ 1/ Style G uses class 2 fittings which are made from a combination of aluminum and CRES. Fitting ends Dimensions 2/ 3/ 1 2 Hose size A (nom) B ( max) C (max) F (max) 8 0.310 1.640 0.880 1.014 10 0.356 1.940 0.967 1.158Straight Straight 12 0.393 1.913 1.122 1.447 16Z 0.429 2.

27、298 1.480 1.73620Z 0.393 2.577 1.750 2.328 24Z 0.398 2.800 2.150 2.6212/ Dimensions are shown on figure 7. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 7. Style G hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-10-05T07:15ZCheck the source to ver

28、ify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 8 Hose assembly dimensions for style H: See table VIII. TABLE VIII. Hose assembly dimensions for style H. 1/ 1/ Style H uses class 2

29、 fittings which are made from a combination of aluminum and CRES. Fitting ends Dimensions 2/ 3/ 1 2 Hose size A (nom) B (max) C (max) D (max) E (max) F (max) G (min) G (max)8 0.310 1.640 0.880 1.722 1.426 1.014 0.542 0.789 10 0.356 1.940 0.967 2.037 1.596 1.158 0.631 0.877 Straight 45 12 0.393 1.913

30、 1.122 2.368 1.739 1.447 0.631 0.952 16Z 0.429 2.298 1.480 2.583 1.931 1.736 0.741 1.069 20Z 0.393 2.577 1.750 2.946 2.084 2.328 0.863 1.196 24Z 0.398 2.800 2.150 3.210 2.376 2.621 1.012 1.402 2/ Dimensions are shown on figure 8. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements

31、. FIGURE 8. Style H hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-10-05T07:15ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 9 Hose as

32、sembly dimensions for style J: See table IX. TABLE IX. Hose assembly dimensions for style J. 1/ 1/ Style J uses class 2 fittings which are made from a combination of aluminum and CRES. Fitting ends Dimensions 2/ 3/ 1 2 Hose size A (nom) B (max) C (max) F (max) H (max) J (max) K (min) K (max)8 0.310

33、1.640 0.880 1.014 2.495 2.032 1.032 1.282 10 0.356 1.940 0.967 1.158 2.955 2.437 1.357 1.607 Straight 90 12 0.393 1.913 1.122 1.447 3.705 2.795 1.591 1.841 16Z 0.429 2.298 1.480 1.736 4.100 3.160 1.741 1.991 20Z 0.393 2.577 1.750 2.328 4.835 3.664 2.021 2.396 24Z 0.398 2.800 2.150 2.621 5.480 4.251

34、2.403 2.778 2/ Dimensions are shown on figure 9. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 9. Style J hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-10-05T07:15ZCheck the source to verify that this is the current version before use.Provided b

35、y IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 10 Hose assembly dimensions for style K: See table X. TABLE X. Hose assembly dimensions for style K. 1/ 1/ Style K uses class 2 fittings which are made from a combination of aluminum and CRE

36、S. Fitting ends Dimensions 2/ 3/ 1 2 Hose size A (nom) C (max) D (max) E (max) F (max) G (min) G (max) 8 0.310 0.880 1.722 1.426 1.014 0.542 0.789 10 0.356 0.967 2.037 1.596 1.158 0.631 0.877 45 45 12 0.393 1.122 2.368 1.739 1.447 0.631 0.952 16Z 0.429 1.480 2.583 1.931 1.736 0.741 1.069 20Z 0.393 1

37、.750 2.946 2.084 2.328 0.863 1.196 24Z 0.398 2.150 3.210 2.376 2.621 1.012 1.402 2/ Dimensions are shown on figure 10. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 10. Style K hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-10-05T07:15ZCheck the

38、source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 11 Hose assembly dimensions for style M: See table XI. TABLE XI. Hose assembly dimensions for style M. 1/ 1/ Style M us

39、es class 2 fittings which are made from a combination of aluminum and CRES. Dimensions 2/ 3/ Fitting ends 1 2 Hose size A (nom) C (max) D (max)E (max)F (max)G (min) G (max)H (max) J (max) K (min) K (max)8 0.310 0.880 1.722 1.426 1.014 0.542 0.789 2.495 2.032 1.032 1.28210 0.356 0.967 2.037 1.596 1.1

40、58 0.631 0.877 2.955 2.437 1.357 1.60745 90 12 0.393 1.122 2.368 1.739 1.447 0.631 0.952 3.705 2.795 1.591 1.84116Z 0.429 1.480 2.583 1.931 1.736 0.741 1.069 4.100 3.160 1.741 1.99120Z 0.393 1.750 2.946 2.084 2.328 0.863 1.196 4.835 3.664 2.021 2.39624Z 0.398 2.150 3.210 2.376 2.621 1.012 1.402 5.48

41、0 4.251 2.403 2.7782/ Dimensions are shown on figure 11. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 11. Style M hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-10-05T07:15ZCheck the source to verify that this is the current version before use.P

42、rovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 12 Hose assembly dimensions for style N: See table XII. TABLE XII. Hose assembly dimensions for style N. 1/ 1/ Style N uses class 2 fittings which are made from a combination of alu

43、minum and CRES. Fitting ends Dimensions 2/ 3/ 1 2 Hose size A (nom) C (max) F (max) H (max) J (max) K (min) K (max) 8 0.310 0.880 1.014 2.495 2.032 1.032 1.282 10 0.356 0.967 1.158 2.955 2.437 1.357 1.607 90 90 12 0.393 1.122 1.447 3.705 2.795 1.591 1.841 16Z 0.429 1.480 1.736 4.100 3.160 1.741 1.99

44、1 20Z 0.393 1.750 2.328 4.835 3.664 2.021 2.396 24Z 0.398 2.150 2.621 5.480 4.251 2.403 2.778 2/ Dimensions are shown on figure 12. 3/ Apply NAS 1760 in accordance with MIL-DTL-25579/1, see requirements. FIGURE 12. Style N hose assembly. Source: http:/assist.daps.dla.mil - Downloaded: 2005-10-05T07:

45、15ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS8006C w/AMENDMENT 1 13 Protective sleeve code: See table XIII. TABLE XIII. Protective sleeve code. Code TypeA SAE AS1072 sleev

46、e, fire protection, silicone covered, temperature ranging from -65F to 450F, and intermittently to 500F, secured with CRES bands as required. 1/ B SAE AS1073 - code B sleeve, abrasion protection, heat shrinkable, black polyolefin, temperature ranging from -65F to 250F. C SAE AS1291 - code A sleeve,

47、chafe guard, extruded seamless white PTFE, temperature ranging from -65F to 450F, secured with CRES bands as required. D SAE AS1291 - code C sleeve, chafe guard, extruded seamless transparent FEP, temperature ranging from -65F to 350F, secured with CRES bands as required. E SAE AS1298 sleeve, heavy

48、wall chafe guard, extruded seamless black PTFE, temperature ranging from -65F to 450F, secured with CRES bands as required. L Lock-wire hole F Code A + L G Code B + L H Code C + L J Code D + L K Code E + L 1/ To prevent wicking of fluids, the cut end of the fire protective sleeve (code A) shall be coated with Room Temperature Vulcanized (RTV) silicone rubber prior to installation. After installation, cracks and voids in the fire protective sleeve shall be coated with RTV rubber to prevent expo

下载提示：本站仅提供存储空间/不修改/不编辑

1.请仔细阅读文档，确保文档完整性，对于不预览、不比对内容而直接下载带来的问题本站不予受理。
2.下载的文档，不会出现我们的网址水印。
3、该文档所得收入（下载+内容+预览）归上传者、原创作者；如果您是本文档原作者，请点此认领！既往收益都归您。

同意并开始全文预览

文档包含非法信息？点此举报后获取现金奖励！

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

10000 积分 0人已下载

下载	加入VIP,交流精品资源

版权申诉 word格式文档无特别注明外均可编辑修改；预览文档经过压缩，下载后原文更清晰！ 立即下载

配套讲稿：: 如PPT文件的首页显示word图标，表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
特殊限制：: 部分文档作品中含有的国旗、国徽等图片，仅作为作品整体效果示例展示，禁止商用。设计者仅对作品中独创性部分享有著作权。
关键词：: DLAMS8006REVC12005HOSEASSEMBLYPOLYTETRAFLUOROETHYLENEPERMANENTLYATTACHEDFITTINGSHIGHTEMPERATUREMEDIUMPRESSUREFLARELESSTOFLARELESS

麦多课文档分享所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。

关于本文

本文标题：DLA MS8006 REV C (1)-2005 HOSE ASSEMBLY POLYTETRAFLUOROETHYLENE PERMANENTLY ATTACHED FITTINGS HIGH TEMPERATURE MEDIUM PRESSURE FLARELESS-TO-FLARELESS《非耀斑对非耀斑中压高温可重复使用永久配件聚四氟乙烯软管组件》.pdf
链接地址：http://www.mydoc123.com/p-693863.html