DIN EN ISO 9712-2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712 2012) German version EN ISO 9712 2012《无损检测 无损检测(NDT)人员的资格鉴定与认证(ISO 9712-20.pdf

《DIN EN ISO 9712-2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712 2012) German version EN ISO 9712 2012《无损检测 无损检测(NDT)人员的资格鉴定与认证(ISO 9712-20.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 9712-2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712 2012) German version EN ISO 9712 2012《无损检测 无损检测(NDT)人员的资格鉴定与认证(ISO 9712-20.pdf（41页珍藏版）》请在麦多课文档分享上搜索。

1、December 2012 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 03.100.30; 19.100!$%O“1930244www.din.deDDIN EN ISO 9712Non-destructive testing Qualification and certification of NDT personnel (ISO 9712:2012);English version EN ISO 9712:2012,English translation of DIN EN ISO 9712:2012-12Zerstrungsfreie Prfung Qualifizierung und Zertifizierung von Personal der

3、zerstrungsfreien Prfung(ISO 9712:2012);Englische Fassung EN ISO 9712:2012,Englische bersetzung von DIN EN ISO 9712:2012-12Essais non destructifs Qualification et certification du personnel END (ISO 9712:2012);Version anglaise EN ISO 9712:2012,Traduction anglaise de DIN EN ISO 9712:2012-12SupersedesD

4、IN EN 473:2008-09www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.4111.12 DIN EN ISO 9712:2012-12 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 135 “Non-dest

5、ructive testing” (Secretariat: JISC, Japan) in collaboration with Technical Committee CEN/TC 138 “Non-destructive testing” (Secretariat: AFNOR, France), in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). The responsible German body involved in its prepa

6、ration was the Normenausschuss Materialprfung (Materials Testing Standards Committee), Working Committee NA 062-08-21 AA Qualifizierung und Zertifi-zierung von Personal der zerstrungsfreien Prfung. Working Committee NA 062-08-21 AA Qualifizierung und Zertifizierung von Personal der zerstrungsfreien

7、Prfung recommends, by way of derogation from this standard, to maintain a minimum duration of training of 72 h for RT1 and of 64 h for UT1. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO/IEC 17024 DIN EN ISO/IEC 17024 CEN/TR 14748 DIN-

8、Fachbericht CEN/TR 14748 CEN/TS 15053 DIN CEN/TS 15053 Amendments This standard differs from DIN EN 473:2008-09 as follows: a) infrared thermographic testing and strain gauge testing have been incorporated; b) the responsibility of the employer has been clarified; c) specifications relating to the t

9、raining hours have been revised; d) requirements relating to industrial NDT experience have been revised; e) electronic qualification examinations and digital certificates have been introduced; f) the conditions for revalidation have been revised; g) the scope of recertification tests has been revis

10、ed; h) a description of the different sectors has been included; i) the standard has been editorially revised. Previous editions DIN EN 473: 1993-07, 2001-03, 2006-01 DIN EN 473 Supplement 1: 1996-11 DIN EN ISO 9712:2012-12 3 National Annex NA (informative) Bibliography DIN EN ISO/IEC 17024, Conform

11、ity assessment General requirements for bodies operating certification of persons DIN-Fachbericht CEN/TR 14748, Non-destructive testing Methodology for qualification of non-destructive tests DIN CEN/TS 15053, Non-destructive testing Recommendations for discontinuities-types in test specimens for exa

12、mination DIN EN ISO 9712:2012-12 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9712 June 2012 ICS 03.100.30; 19.100 Supersedes EN 473:2008English Version Non-destructive testing - Qualification and certification of Essais non destructifs - Qualification

13、et certification du personnel END (ISO 9712:2012) Zerstrungsfreie Prfung - Qualifizierung und Zertifizierung von Personal der zerstrungsfreien Prfung This European Standard was approved by CEN on 2 June 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

14、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standar

15、d exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nation

16、al standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerla

17、nd, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.

18、No. EN ISO 9712:2012: ENDT personnel (ISO 9712:2012) (ISO 9712:2012) Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Methods and abbreviated terms .10 5 Responsibilities .10 5.1 General 10 5.2 Certification body 10 5.3 Authorized qualification

19、 body 11 5.4 Examination centre 11 5.5 Employer .12 5.6 Candidate 13 5.7 Certificate holders .13 6 Levels of qualification .13 6.1 Level 1 .13 6.2 Level 2 .13 6.3 Level 3 .14 7 Eligibility .14 7.1 General 14 7.2 Training .14 7.3 Industrial NDT experience 16 7.4 Vision requirements all levels 17 8 Qu

20、alification examination .18 8.1 General 18 8.2 Examination content and grading for Level 1 and Level 2 18 8.3 Examination content and grading for Level 3 .20 8.4 Conduct of examinations 22 8.5 Re-examination 22 8.6 Examination exemptions 23 9 Certification 23 9.1 Administration 23 9.2 Certificates a

21、nd/or wallet cards 23 9.3 Digital certificates 24 9.4 Validity 24 10 Renewal 24 11 Recertification 25 11.1 General 25 11.2 Level 1 and 2 25 11.3 Level 3 .25 12 Files .26 13 Transition period 26 14 Transition between EN 473:2008,4ISO 9712:2005 and this International Standard 27 Annex A (normative) Se

22、ctors .28 2 EN ISO 9712:2012 (E) DIN EN ISO 9712:2012-12 Annex B (normative) Minimum number and type of specimens for the Level 1 and Level 2 practical examination 29 Annex C (normative) Structured credit system for Level 3 recertification . 30 Annex D (normative) Grading practical examination 32 An

23、nex E (informative) Engineering of NDT 35 Bibliography 36 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC 3 EN ISO 9712:2012 (E) DIN EN ISO 9712:2012-12 37Foreword This document (EN ISO 9712:2012) has been prepared by Technic

24、al Committee ISO/TC 135 Non-destructive testing” in collaboration with Technical Committee CEN/TC 138 “Non-destructive testing” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorse

25、ment, at the latest by December 2012, and conflicting national standards shall be withdrawn at the latest by December 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for ident

26、ifying any or all such patent rights. This document supersedes EN 473:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see in

27、formative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto

28、nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 9712:2012 has been approved

29、 by CEN as a EN ISO 9712:2012 without any modification. “4 EN ISO 9712:2012 (E) DIN EN ISO 9712:2012-12 IntroductionSince the effectiveness of any application of non-destructive testing (NDT) depends upon the capabilities of the persons who perform or are responsible for the test, a procedure has be

30、en developed to provide a means of evaluating and documenting the competence of personnel whose duties require the appropriate theoretical and practical knowledge of the non-destructive tests they perform, specify, supervise, monitor or evaluate. An added incentive stems from the worldwide comparabi

31、lity of a wide range of industrial applications requiring common non-destructive testing approaches.When certification of NDT personnel is required in product standards, regulations, codes or specifications, it is important to certify the personnel in accordance with this International Standard. Whe

32、n latitude is provided in the criteria within this International Standard, the certification body has the final decision in determining specific requirements.When there is no requirement in legislation, in standard or in the order for certification of NDT personnel, it is for employers of such perso

33、nnel to decide how to assure themselves that they are competent to do the work assignments. Thus, they may employ people who are already certified or they may apply their own expertise so as to assure themselves that their employee has the necessary competence. In this last case, prudent employers w

34、ould no doubt use this International Standard as a reference document.5 EN ISO 9712:2012 (E) DIN EN ISO 9712:2012-12 1 ScopeThis International Standard specifies requirements for principles for the qualification and certification of personnel who perform industrial non-destructive testing (NDT).NOTE

35、 1 The term “industrial” implies the exclusion of applications in the field of medicine.The system specified in this International Standard can also apply to other NDT methods or to new techniques within an established NDT method, provided a comprehensive scheme of certification exists and the metho

36、d or technique is covered by International, regional or national standards or the new NDT method or technique has been demonstrated to be effective to the satisfaction of the certification body.NOTE 2 CEN/TR 147485can be used as guidance.The certification covers proficiency in one or more of the fol

37、lowing methods:a) acoustic emission testing;b) eddy current testing;c) infrared thermographic testing;d) leak testing (hydraulic pressure tests excluded);e) magnetic testing;f) penetrant testing;g) radiographic testing;h) strain gauge testing;i) ultrasonic testing;j) visual testing (direct unaided v

38、isual tests and visual tests carried out during the application of another NDT method are excluded).NOTE 3 This International Standard specifies requirements for what are, in effect, third party conformity assessment schemes. These requirements do not directly apply to conformity assessment by secon

39、d or first parties, but relevant parts of this International Standard can be referred to in such arrangements.NOTE 4 Wherever gender specific words such as “his”, “her”, “he” or “she” appear in this International Standard, the other gender is also applicable.2 Normative referencesThe following refer

40、enced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/IEC 17024, Conformity assessment General requirements for bodies

41、operating certification of persons6 EN ISO 9712:2012 (E) DIN EN ISO 9712:2012-12 3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1authorized qualification bodybody, independent of the employer, authorized by the certification body to prepare and

42、administer qualification examinations3.2basic examinationwritten examination, at Level 3, which demonstrates the candidates knowledge of the materials science and process technology and types of discontinuities, the specific qualification and certification system, and the basic principles of NDT met

43、hods as required for Level 2NOTE 1 For an explanation of the three levels of qualification, see Clause 6.NOTE 2 The qualification and certification system is specified in this International Standard.3.3candidateindividual seeking qualification and certification who gains experience under the supervi

44、sion of personnel having a qualification acceptable to the certification body3.4certificatedocument issued by the certification body under specified provisions, indicating that the named person has demonstrated the competence(s) defined on the certificateNOTE The provisions are specified in this Int

45、ernational Standard.3.5certificationprocedure used by the certification body to confirm that the qualification requirements for a method, level and sector have been fulfilled, leading to the issuing of a certificate3.6certification bodybody that administers procedures for certification according to

46、specified requirementsNOTE The requirements are specified in this International Standard.3.7employerorganization for which the candidate works on a regular basisNOTE An employer can also be a candidate at the same time.3.8examination centrecentre approved by the certification body where qualificatio

47、n examinations are carried out3.9examinerperson certified to Level 3 in the method and product or industrial sector for which he is authorized by the certification body to conduct, supervise and grade the qualification examination3.10general examinationwritten examination, at Level 1 or Level 2, con

48、cerned with the principles of an NDT method7 EN ISO 9712:2012 (E) DIN EN ISO 9712:2012-12 3.11industrial experienceexperience, acceptable to the certification body, gained under qualified supervision, in the application of the NDT method in the sector concerned, needed to acquire the skill and knowledge to fulfil the provisions of qualification3.12invigilatorperson authorized by the certification body to supervise examinations3.13job-specific trainingtraining, provided by the employer (or his agent) to the certificate holder