CLC TS 50654-2-2018 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2 Parameter Lists.pdf

《CLC TS 50654-2-2018 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2 Parameter Lists.pdf》由会员分享，可在线阅读，更多相关《CLC TS 50654-2-2018 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2 Parameter Lists.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06HVDC Grid Systems and connected Converter Stations Guideline and Parameter Lists for Functional SpecificationsPart 2: Parameter ListsPD CLC/TS 50654-2:2018TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIF

2、IKATION CLC/TS 50654-2 March 2018 ICS 29.240.01 English Version HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists Rseaux CCHT et stations de conversion connectes - Lignes directrices et listes de paramtres pour

3、les spcifications fonctionnelles - Partie 2: Listes de paramtres Hochspannungsgleichstrom-Netzsysteme - Leitfaden und Parameter-Listen fr funktionale Spezifikationen - Teil 2: Parameter-Listen This Technical Specification was approved by CENELEC on 2018-01-22. CENELEC members are required to announc

4、e the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croat

5、ia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerlan

6、d, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in a

7、ny form and by any means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50654-2:2018 ENational forewordThis Published Document is the UK implementation of CLC/TS 50654-2:2018.The UK participation in its preparation was entrusted to Technical Committee GEL/8, Systems Aspects for Electrical E

8、nergy Supply.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published

9、by BSI Standards Limited 2018ISBN 978 0 580 99257 5ICS 29.240.01Compliance with a British Standard cannot confer immunity from legal obligations.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued sinc

10、e publicationDate Text affectedPUBLISHED DOCUMENTPD CLC/TS 50654-2:2018TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50654-2 March 2018 ICS 29.240.01 English Version HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Spe

11、cifications - Part 2: Parameter Lists Rseaux CCHT et stations de conversion connectes - Lignes directrices et listes de paramtres pour les spcifications fonctionnelles - Partie 2: Listes de paramtres Hochspannungsgleichstrom-Netzsysteme - Leitfaden und Parameter-Listen fr funktionale Spezifikationen

12、 - Teil 2: Parameter-Listen This Technical Specification was approved by CENELEC on 2018-01-22. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep con

13、flicting national standards in force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

14、Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elek

15、trotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50654-2:2018 EPD CLC/TS 50654-2:2018CLC/TS 50654-2:2018 (E) 2 Contents Page European

16、 foreword . 5 Introduction . 6 1 Scope . 7 1.1 General . 7 1.2 About the present release 7 2 Normative references . 7 3 Terms, definitions and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Abbreviations 10 4 Coordination of HVDC Grid System and AC Systems . 11 4.1 Purpose of the HVDC Grid Syst

17、em and Power Network Diagram 11 4.2 Hybrid AC/DC Power Flow Optimization 12 4.3 Basic Operation Functions Converter Normal Operation State 14 4.3.1 General 14 4.3.2 AC System Frequency by a Frequency / Power Droop 15 4.3.3 DC Voltage / DC Power Droop . 15 4.4 Basic Operation Functions Converter Abno

18、rmal Operation State 15 4.4.1 General 15 4.4.2 Network Conditions and Power Flow Requirements 16 4.4.3 Abnormal AC Voltage Conditions . 16 4.5 Ancillary Services . 18 4.5.1 General 18 4.5.2 Frequency Control Related Services 18 4.5.3 AC Voltage Control Related Services . 20 4.5.4 Power Oscillation D

19、amping Services 20 4.5.5 System Restoration Services 20 5 HVDC Grid System Characteristics . 21 5.1 HVDC Circuit Topologies . 21 5.1.1 Basic Characteristics and Nomenclature 21 5.1.2 Attributes of HVDC Grid Systems or HVDC Grid Sub-Systems . 21 5.1.3 Attributes of a Converter Station . 21 5.2 Grid O

20、perating States 22 5.2.1 Normal State . 22 5.2.2 Alert State . 22 5.2.3 Emergency State . 22 5.2.4 Blackout State . 23 5.2.5 Restoration 23 5.3 DC Voltages . 23 5.3.1 General 23 5.3.2 Nominal DC System Voltage 24 5.3.3 Steady-State DC Voltage 24 5.3.4 Temporary DC Voltage . 24 5.4 Insulation Coordin

21、ation 25 PD CLC/TS 50654-2:2018CLC/TS 50654-2:2018 (E) 3 5.5 Short-Circuit Characteristics 25 5.5.1 General Remarks 25 5.5.2 Calculation of Short-Circuit Currents in HVDC Grid Systems. 25 5.5.3 Short Circuit Current Design Requirements 27 5.6 Steady-State Voltage and Current Distortions . 27 6 HVDC

22、Grid System Control 27 6.1 Closed-Loop Control Functions 27 6.1.1 General 27 6.1.2 Core Control Functions . 27 6.1.3 Coordinating Control Functions 28 6.2 Controller Hierarchy . 28 6.2.1 General 28 6.2.2 Internal Converter Control . 28 6.2.3 DC Node Voltage Control 28 6.2.4 Coordinated System Contro

23、l . 28 6.2.5 AC/DC Grid Control . 30 6.3 Propagation of Information . 31 6.4 Open-Loop Controls . 34 6.4.1 Operating Sequences for Grid Installations 34 6.4.2 Operating Sequences for the Return Path 35 6.4.3 Recovery . 35 7 HVDC Grid System Protection . 36 7.1 General . 36 7.2 DC Fault Separation .

24、36 7.3 Protection System Related Installations and Equipment . 36 7.3.1 AC/DC Converter Station 36 7.3.2 HVDC Grid System Topology and Equipment 36 7.4 HVDC Grid System Protection Zones 36 7.4.1 General 36 7.4.2 Permanent Stop P . 38 7.4.3 Permanent Stop PQ 38 7.4.4 Temporary Stop P . 39 7.4.5 Tempo

25、rary Stop PQ 39 7.4.6 Continued Operation . 39 7.4.7 Example of a Protection Zone Matrix 39 7.5 DC Protection . 39 7.5.1 General 39 7.5.2 DC Converter Protections . 40 7.5.3 HVDC Grid System Protections 40 7.5.4 HVDC Hub Respective HVDC Node Protections . 40 7.5.5 DC Grid Protection Communication 40

26、 8 AC/DC Converter Stations . 40 8.1 General . 40 8.2 AC/DC Converter Station Types 40 9 HVDC Grid System Installations 40 10 Models and Validation 40 10.1 Introduction . 40 10.2 HVDC Grid System Studies . 40 10.2.1 Type of Studies . 40 PD CLC/TS 50654-2:2018CLC/TS 50654-2:2018 (E) 4 10.2.2 Tools an

27、d Methods 41 10.3 Model General Specifications 41 10.3.1 Model Capability 41 10.3.2 Model Format and Data Type . 41 10.3.3 Model Aggregation 41 10.4 Model Specific Recommendations . 42 10.4.1 Load Flow Models . 42 10.4.2 Short-Circuit Models 42 10.4.3 Protection System Models 42 10.4.4 Insulation Co

28、ordination Related Models . 42 10.4.5 Electromechanical Transient Models 43 10.4.6 Electromagnetic Transient Models 44 10.4.7 Power Quality Models . 49 10.5 Model Validation . 50 10.6 Compliance Simulation 51 10.7 Outputs/Results 51 10.7.1 Model Data 51 10.7.2 Model Documentation . 51 10.7.3 Model E

29、xample . 51 10.7.4 Model Compliance Documentation . 51 10.7.5 Model Validation Documentation Model Final Version 51 10.7.6 Model Guarantee 51 11 HVDC Grid System Integration Tests 51 Bibliography 52 PD CLC/TS 50654-2:2018CLC/TS 50654-2:2018 (E) 5 European foreword This document (CLC/TS 50654-2:2018)

30、 has been prepared by CLC/TC8X/WG 06 “System Aspects of HVDC Grid”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. PD CLC/TS 50654-2:2018CLC/TS

31、50654-2:2018 (E) 6 Introduction HVDC Grid Systems are a new field of technology. There are very few systems with a small number of converter stations in operation; some more are in execution or in detailed planning. The Guidelines and Parameter Lists to Functional Specifications are presented featur

32、ing planning, specification and execution of multi-vendor HVDC Grid Systems in Europe. Being elaborated by a team of experts from leading manufacturers of HVDC technology, Transmission System Operators (TSOs), Academia and Institutions in Europe, the present document provides a commonly agreed basis

33、 for an open market of compatible equipment and solutions for HVDC Grid Systems. Executing such systems and gaining operational experience is seen an important prerequisite for developing corresponding technical standards in the future. By elaborating this document, special care has been taken to as

34、 far as possible describe the requirements in a technologically independent way. In order to achieve that, a function of interest is described by a comprehensive set of parameters. The parameters are selected based on a systematic analysis of physical phenomena relevant to achieve the requested func

35、tionality. The physical phenomena are categorized in order to show the mutual dependence of the individual parameters and ensure completeness of the physical aspects to be considered. Based on a clearly defined common language describing the functionalities requested, existing technologies can be ap

36、plied or new dedicated technical solutions can be developed. Reflecting the early stage of technology, these Guidelines and Parameter Lists to Functional Specifications need comprehensive explanations and background information for the technical parameters. This dual character of the content will be

37、 represented by two corresponding parts: Part I “Guidelines” containing the explanations and the background information in context with the Parameter Lists. Part II “Parameter Lists” containing the essential lists of parameters and values describing properties of the a.c. respectively d.c. system (o

38、perating conditions) and parameters describing the performance of the newly installed component (performance requirements). PD CLC/TS 50654-2:2018CLC/TS 50654-2:2018 (E) 7 1 Scope 1.1 General These Guidelines and Parameter Lists to Functional Specifications describe specific functional requirements

39、for HVDC Grid Systems. The terminology “HVDC Grid Systems” is used here describing HVDC systems for power transmission having more than two converter stations connected to a common d.c. circuit. While this document focuses on requirements, that are specific for HVDC Grid Systems, some requirements a

40、re considered applicable to all HVDC systems in general, i.e. including point-to-point HVDC systems. Existing IEC, Cigr or other documents relevant have been used for reference as far as possible. Corresponding to electric power transmission applications, this document is applicable to high voltage

41、systems, i.e. .only nominal d.c. voltages equal or higher than 50 kV with respect to earth are considered in this document. NOTE While the physical principles of d.c. networks are basically voltage independent, the technical options for designing equipment get much wider with lower d.c. voltage leve

42、ls, e.g. in case of converters or switchgear. Both parts have the same outline and headlines to aid the reader. 1.2 About the present release The present release of the Guidelines and Parameter Lists for Functional Specifications describes technical guidelines and specifications for HVDC Grid System

43、s which are characterized by having exactly one single connection between two converter stations, often referred to as radial systems. When developing the requirements for radial systems, care is taken not to build up potential show-stoppers for meshed systems. Meshed HVDC Grid Systems can be includ

44、ed into this specification at a later point in time. The Guidelines and Parameter List to the Functional Specification of HVDC Grid Systems cover technical aspects of Coordination of HVDC Grid and a.c. Systems HVDC Grid System Characteristics HVDC Grid System Control HVDC Grid System Protection Mode

45、ls and Validation Beyond the present scope, the following aspects are proposed for future work: AC/DC converter stations HVDC Grid System Equipment HVDC Grid System Integration Tests 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and

46、are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 62747:2014, Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC

47、) systems (IEC 62747:2014) PD CLC/TS 50654-2:2018CLC/TS 50654-2:2018 (E) 8 EN 61660-1:1997, Short-circuit currents in d.c. auxiliary installations in power plants and substations Part 1: Calculation of short-circuit currents (IEC 61660-1:1997) 3 Terms, definitions and abbreviations 3.1 Terms and def

48、initions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.

49、iso.org/obp 3.1.1 AC/DC converter unit indivisible operative unit comprising all equipment between the point of connection on the a.c. side and the point of connection on the d.c. side, essentially one or more converters, together with converter transformers, control equipment, essential protective and switching devices and auxiliaries, if any, used for conversion SOURCE: EN 62747:2014, modified The definition was neutralised with respect to technology (not only VSC converters) and uses the terms PoC as defined in the prese