CEN TR 115-3-2017 Safety of escalators and moving walks - Part 3 Correlation between EN 115-1 2008+A1 2010 and EN 115-1 2017.pdf

《CEN TR 115-3-2017 Safety of escalators and moving walks - Part 3 Correlation between EN 115-1 2008+A1 2010 and EN 115-1 2017.pdf》由会员分享，可在线阅读，更多相关《CEN TR 115-3-2017 Safety of escalators and moving walks - Part 3 Correlation between EN 115-1 2008+A1 2010 and EN 115-1 2017.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Safety of escalators and moving walksPart 3: Correlation between EN 115-1:2008+A1:2010 and EN 115-1:2017PD CEN/TR 115-3:2017TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 115-3 November 2017 ICS 91.140.90

2、 Supersedes CEN/TR 115-3:2009English Version Safety of escalators and moving walks - Part 3: Correlation between EN 115-1:2008+A1:2010 and EN 115-1:2017 Scurit des escaliers mcaniques et trottoirs roulants - Partie 3 : Corrlation entre lEN 115-1:2008+A1:2010 et lEN 115-1:2017 Sicherheit von Fahrtrep

3、pen und Fahrsteigen - Teil 3: bereinstimmung zwischen EN 115-1:2008+A1:2010 und EN 115-1:2017 This Technical Report was approved by CEN on 22 October 2017. It has been drawn up by the Technical Committee CEN/TC 10. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia,

4、 Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey a

5、nd United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.

6、No. CEN/TR 115-3:2017 ENational forewordThis Published Document is the UK implementation of CEN/TR 1153:2017. It supersedes PD CEN/TR 1153:2009, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee MHE/4, Lifts, hoists and escalators.A list of organizations

7、 represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 97

8、8 0 580 98976 6ICS 91.140.90Compliance with a British Standard cannot confer immunity from legal obligations.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 January 2018.Amendments/corrigenda issued since publicationDate Text affectedPUB

9、LISHED DOCUMENTPD CEN/TR 1153:2017TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 115-3 November 2017 ICS 91.140.90 Supersedes CEN/TR 115-3:2009English Version Safety of escalators and moving walks - Part 3: Correlation between EN 115-1:2008+A1:2010 and EN 115-1:2017 Scurit des escalie

10、rs mcaniques et trottoirs roulants - Partie 3 : Corrlation entre lEN 115-1:2008+A1:2010 et lEN 115-1:2017 Sicherheit von Fahrtreppen und Fahrsteigen - Teil 3: bereinstimmung zwischen EN 115-1:2008+A1:2010 und EN 115-1:2017 This Technical Report was approved by CEN on 22 October 2017. It has been dra

11、wn up by the Technical Committee CEN/TC 10. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

12、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-

13、1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 115-3:2017 EPD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 2 Contents Page European foreword . 3 Introduction 3 1 Scope 5 2 Normative references 5 3 Terms and definit

14、ions . 5 4 List of significant hazards 5 5 Correlation between EN 115-1:2017 and EN 115-1:2008+A1:2010 and vice versa . 5 Bibliography . 31 PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 3 European foreword This document (CEN/TR 115-3:2017) has been prepared by Technical Committee CEN/TC 10 “Lifts, escala

15、tors and moving walks”, the secretariat of which is held by AFNOR. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document super

16、sedes CEN/TR 115-3:2009. The reason for the revision of CEN/TR 115-3 was the publication of EN 115-1:2017. CEN/TR 115-3:2009 compared EN 115-1:1995, including amendments A1 and A2, with EN 115-1:2008. CEN/TR 115-3:2017 compares EN 115-1:2017 with EN 115-1:2008+A1:2010. PD CEN/TR 1153:2017CEN/TR 115-

17、3:2017 (E) 4 Introduction This Technical Report has been prepared to allow the user to compare the existing standard EN 115-1:2017 with the EN 115-1:2008+A1:2010 and vice versa. PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 5 1 Scope This Technical Report applies to escalators and moving walks built in a

18、ccordance with EN 115-1:2017. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

19、 document (including any amendments) applies. EN 115-1:2008+A1:2010, Safety of escalators and moving walks - Part 1: Construction and installation EN 115-1:2017, Safety of escalators and moving walks - Part 1: Construction and installation 3 Terms and definitions For the purposes of this document, t

20、he terms and definitions given in EN 115-1:2017 and EN 115-1:2008+A1:2010 apply. 4 List of significant hazards For the purpose of this document, the list of significant hazards given in EN 115-1:2017 and EN 115-1:2008+A1:2010 apply. 5 Correlation between EN 115-1:2017 and EN 115-1:2008+A1:2010 and v

21、ice versa This Technical Report is presented in the form of two tables. Table 1 provides a correlation between EN 115-1:2008+A1:2010 and EN 115-1:2017 based upon the chronological clause references of EN 115-1:2008+A1:2010. Table 2 provides a similar correlation but using EN 115-1:2017 as the base d

22、ocument for comparison. Each clause is cross-referenced to its equivalent clause and the table illustrates the status of the text or requirement. Guidance is given on whether the clause has remained unchanged, is modified, is new or has been deleted. Where appropriate a short explanation is given in

23、 the “Remarks” column to highlight changes and new requirements contained in the revision of EN 115-1:2017. PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 6 Table 1 Correlation between EN 115-1:2008+A1:2010 and EN 115-1:2017 EN 115-1:2008+A1:2010 EN 115-1:2017 UnchangedModifiedNewDeletedRemarks Introducti

24、on Introduction x 1 Scope 1 Scope 1.1 1.1 x 1.2 - x Requirements for seismic activities included in Annex M. 1.3 1.2 x 2 Normative references 2 Normative references x Updated. 3 Terms and definitions 3 Terms and definitions 3.1.1 3.1.1 x - 3.1.2 x 3.1.2 3.1.3 x 3.1.3 3.1.4 x 3.1.4 3.1.5 x 3.1.5 a 3.

25、1.6 x 3.1.5 b 3.1.7 x - 3.1.8 x 3.1.6 3.1.27 x Term changed, definition the same. 3.1.7 3.1.24 x Term changed, definition the same. 3.1.8 3.1.9 x 3.1.9 3.1.10 x 3.1.10 3.1.11 x 3.1.11 3.1.12 x 3.1.12 3.1.13 x 3.1.13 a 3.1.14 x 3.1.13 b 3.1.15 x PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 7 EN 115-1:200

26、8+A1:2010 EN 115-1:2017 UnchangedModifiedNewDeletedRemarks 3.1.14 3.1.16 x 3.1.15 3.1.17 x 3.1.16 3.1.18 x 3.1.17 3.1.19 x 3.1.18 3.1.20 x 3.1.19 3.1.21 x Rated speed not used anymore and deleted. 3.1.20 3.1.26 x E/E/PE instead of PESSRAE. 3.1.21 - x 3.1.22 3.1.22 x 3.1.23 3.1.23 x 3.1.24 3.1.25 x E

27、/E/PE instead of PESSRAE. 3.1.25 3.1.28 x 3.1.26 3.1.29 x 3.1.27 - x 3.1.28 - x - 3.1.30 x 3.2 3.2 Modified 4 List of significant hazards 4 List of significant hazards 4.1 4.1 x Reference EN ISO 14121-1 obsolete, replaced by EN ISO 12100. 4.2 4.2 x “fixed devices” added. 4.3 4.3 x 4.4 4.4 x 4.5 4.5

28、x 4.6 4.6 x 4.7 4.7 x PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 8 EN 115-1:2008+A1:2010 EN 115-1:2017 UnchangedModifiedNewDeletedRemarks 4.8 4.8 x 4.9 4.9 x “stopping” added. 4.10 4.10 x - 4.11 x 5 Safety requirements and/or protective/risk reduction measures 5 Safety requirements and/or protective/r

29、isk reduction measures 5.1 5.1 x Reference to Annex M (seismic conditions) added. 5.2.1.1 5.2.1.1 x 5.2.1.2 5.2.1.2 x Definition of gaps added. 5.2.1.3 5.2.1.3 x 5.2.1.4 5.2.1.4 x 5.2.1.5 5.2.1.5 x 5.2.1.6 5.2.1.6 x 5.2.2 5.2.2 x 5.2.3 5.2.3 x 5.2.4 5.2.4 x 5.2.5 5.2.5 x Requirements for comb and fl

30、oor plate deflection added. 5.3.1 5.3.1 x 5.3.2 5.3.2 x 5.3.3.1 5.3.3.1 x 5.3.3.2.1 5.3.3.2.1 x New requirements for inserts/fixings and tread surface on the side. 5.3.3.2.2 5.3.3.2.2 x New requirements for inserts/fixings and test procedure defined more accurately. 5.3.3.2.3 5.3.3.2.3 x 5.3.3.2.4 5

31、.3.3.2.4 x PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 9 EN 115-1:2008+A1:2010 EN 115-1:2017 UnchangedModifiedNewDeletedRemarks 5.3.3.3 5.3.3.3 x 5.3.4 5.3.4 x 5.3.5 5.3.5 x Measuring procedure defined more accurately 5.3.6 5.3.6 x 5.12.2.7.11 x Position of the device more accurately defined. 5.4.1.1 5

32、.4.1.1 x 5.4.1.2.1 5.4.1.2.1 x “Nominal speed” replaced by “speed of an unloaded escalator”. 5.4.1.2.2 5.4.1.2.2 x 5.4.1.2.3 5.4.1.2.3 x 5.4.1.3.1 5.4.1.3.1 x 5.4.1.3.2 5.4.1.3.2 x New requirement for fatigue life clarified. Driving elements defined more accurately. 5.4.1.4 5.4.1.4 x 5.4.1.5 5.12.3.

33、5.1 x Stopping, as the initiation of a braking sequence, defined more accurately. 5.4.2.1.1 5.4.2.1.1 x 5.4.2.1.1.1 5.4.2.1.1 x Improved wording; condition added for no intentional delay. 5.12.2.7.12 5.12.3.5.2.1 5.12.3.10 - 5.4.2.1.1.2 x Electrical braking added as specific type of braking. 5.4.2.1

34、.1.2 5.12.3.5.1 x Note added. PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 10 EN 115-1:2008+A1:2010 EN 115-1:2017 UnchangedModifiedNewDeletedRemarks 5.4.2.1.1.3 5.4.2.1.1.1 x 5.4.2.1.1.2 5.4.2.1.1.3 5.4.2.1.1.4 5.4.2.1.1.4 x 5.4.2.1.2 5.4.2.1.2 x 5.12.3.5.1 5.4.2.1.3 5.4.2.1.3 x 5.4.2.2 5.4.2.2 5.4.2.2.

35、1 5.4.2.2.1 x 5.4.2.2.2 5.4.2.2.2 x Butterworth filter added for auxiliary brake. 5.4.2.2.3 5.4.2.2.3 x 5.4.2.2.4 5.4.2.2.4 x 5.12.3.5.3 5.12.2.7.4 5.4.2.2.5 5.4.2.2.5 x 5.4.2.3.1 5.4.2.3 x 5.12.2.2 x 5.12.2.7.2 x 5.4.2.3.2 5.4.2.3 x 5.12.2.2 x 5.12.2.7.3 x 5.4.3.1 5.4.3.1 X 5.12.2.7.5 X 5.4.3.2 5.4

36、.3.2 X 5.4.3.3 5.4.3.3 X 5.12.2.7.6 X PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 11 EN 115-1:2008+A1:2010 EN 115-1:2017 UnchangedModifiedNewDeletedRemarks 5.4.4.1 5.4.4.1 X 5.4.4.2 5.4.4.2 x 5.12.2.7.6 x 5.5 5.5 x 5.5.3 5.5.3 x 5.5.3.1 5.5.3.1 x 5.5.3.2 5.5.3.2 x 5.5.3.3 5.5.3.3 x Deflection requireme

37、nt defined more accurately. 5.5.3.4 5.5.3.4 x Shape of skirt deflector defined in more detail. Materials for friction test updated, based on modified referenced standard. 5.5.4 5.5.4 x 5.5.5 5.5.5 x 5.6.1 5.6.1 x 5.12.2.7.13 x Requirement for detection time frame updated. 5.6.2.1 5.6.2.1 x Requireme

38、nt for clearance under handrail profile modified. 5.6.2.2 5.6.2.2 x 5.6.2.3 5.6.2.3 x 5.6.3 5.6.3 x 5.6.4.1 5.6.4.1 x 5.6.4.2 5.6.4.2 x 5.6.4.3 5.6.4.3 x 5.12.2.7.9 x 5.6.5 5.6.5 x 5.7.1 5.7.1 x PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 12 EN 115-1:2008+A1:2010 EN 115-1:2017 UnchangedModifiedNewDelet

39、edRemarks 5.7.2 5.7.2 x 5.7.2.1 5.7.2.1 x 5.7.2.2 5.7.2.2 x 5.7.2.3 5.7.2.3 x 5.7.2.4 5.7.2.4 x 5.7.2.5 5.7.2.5 x 5.12.2.7.10 x 5.7.3.1 5.7.3.1 x 5.7.3.2 5.7.3.2 x 5.7.3.2.1 5.7.3.2.1 x 5.7.3.2.2 5.7.3.2.2 x 5.7.3.2.3 5.7.3.2.3 x 5.7.3.2.4 5.7.3.2.4 x 5.7.3.2.5 5.7.3.2.5 x 5.7.3.2.6 5.7.3.2.6 x 5.12

40、.2.7.7 x 5.7.3.3 5.7.3.3 x 5.8.1 5.8.1 x 5.8.2.1 5.8.2.1 x Requirement for standing area updated. 5.8.2.2 5.8.2.2 x 5.8.2.3 5.8.2.3 x 5.8.3 5.8.3 x 5.8.4 5.12.2.7.17 x 5.9 5.9 x Requirements for test added. Sprinkler and water mist systems added. 5.10 5.10 x PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E)

41、13 EN 115-1:2008+A1:2010 EN 115-1:2017 UnchangedModifiedNewDeletedRemarks 5.11.1 5.11.1 x 5.11.2.1.1 5.11.2.1.1 x 5.11.2.1.2 5.11.2.1.2 x 5.11.2.1.3 5.11.2.1.3 x - 5.11.2.1.4 x 5.11.2.2 5.11.2.2 x 5.11.3 5.12.1.3 x 5.11.4 5.11.3 x 5.11.5.1 5.11.5.1.1 5.11.5.1.2 5.11.5.1.3 5.11.5.1.4 5.11.5.1.5 5.11.

42、4.1 x 5.11.5.2 5.11.4.2 x 5.11.5.3 5.11.4.3 x 5.11.5.3.1 5.11.4.3.1 x Reference to EN 60204-1. 5.11.4.3.2 x 5.11.4.3.3 x 5.11.4.3.4 x 5.11.5.3.2 5.11.4.3.5 x Warning label according to EN 60204-1. 5.11.5.3.3 5.11.4.3.7 x 5.11.5.4 5.11.4.4 x 5.11.6 5.11.4.3.6 x 5.11.7 5.12.1.5 x 5.12.1.1 - x - 5.12.1

43、 x - 5.12.1.1 x PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 14 EN 115-1:2008+A1:2010 EN 115-1:2017 UnchangedModifiedNewDeletedRemarks 5.12.1.1.1 5.12.1.2.1 x 5.12.1.1.2 5.12.1.2.2 x 5.12.1.1.3 5.12.1.2.3 x 5.12.1.1.4 5.12.1.4 x 5.12.1.2.1.1 5.12.2.2 x 5.12.1.2.1.2 5.12.2.3 x 5.12.1.2.1.3 - x 5.12.1.2.1

44、.4 - x 5.12.1.2.1.5 5.12.2.4 x 5.12.1.2.2 5.12.2.6.1 x 5.12.1.2.2.1 5.12.2.6.1.1 x 5.12.1.2.2.2 5.12.2.6.1.2 x 5.12.1.2.2.3 5.12.2.6.1.3 x 5.12.1.2.2.4 5.12.2.6.1.4 x 5.12.1.2.2.5 5.12.2.6.1.5 x 5.12.1.2.3 5.12.2.6.2 x 5.12.1.2.4 5.12.2.2 x 5.12.3.5 x Initiation of braking sequence defined. 5.12.1.2

45、.5 5.12.2.5 x 5.12.1.2.6 5.12.2.6.3 x E/E/PE instead of PESSRAE. 5.12.2.1 - x - 5.12.3.1 x 5.12.2.1.1 5.12.3.2 x 5.12.2.1.2 5.12.3.3.1 x 5.12.3.4.1 x PD CEN/TR 1153:2017CEN/TR 115-3:2017 (E) 15 EN 115-1:2008+A1:2010 EN 115-1:2017 UnchangedModifiedNewDeletedRemarks 5.12.2.1.3 5.12.3.3.2 x Requirement

46、s for automatic operation defined in more detail. Separation of starting in predetermined-direction and starting in 2-direction-mode. 5.12.3.3.3 5.12.3.3.3.1 5.12.3.3.3.2 5.12.3.4.2 5.12.3.4.3 5.12.3.4.3.1 5.12.3.4.3.2 5.12.2.2.1 5.12.3.6 x 5.12.2.2.2 5.12.3.7 x 5.12.2.2.3 5.12.3.8 x Wording updated

47、. 5.12.2.2.3.1 5.12.3.8.1 x Requirement for Stop indicator defined. 5.12.2.2.3.2 5.12.3.8.1 x 5.12.2.2.4 5.12.2.2.4.1 5.12.3.9 x 5.12.2.2.4.1 5.12.2.7 x Failure lock and enabled inspection mode included in Table 8. Events to be detected updated. 5.12.2.7.1 5.12.2.2.4.2 5.12.2.2 x 5.12.2.3 5.12.3.11 x 5.12.2.4.1 5.12.2.8 x 5.12.3.2 x 5.12.2.4.2 5.12.