ASTM D123-2007 Standard Terminology Relating to Textiles《纺织材料相关标准术语》.pdf
《ASTM D123-2007 Standard Terminology Relating to Textiles《纺织材料相关标准术语》.pdf》由会员分享,可在线阅读,更多相关《ASTM D123-2007 Standard Terminology Relating to Textiles《纺织材料相关标准术语》.pdf(71页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: D 123 07Standard Terminology Relating toTextiles1This standard is issued under the fixed designation D 123; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates t
2、he year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This standard is the compilation of all terminologydeveloped by Committee D-13 on Textiles.1.1.1 This terminology, consists mostly of definitions,which are specific to
3、 the textile industry. Meanings of the sameterms used outside the textile industry can be found in othercompilations or in dictionaries of general usage.1.1.2 The specific D13 subcommittee which has jurisdic-tional responsibility for every item is the first attribution notedafter the definition. The
4、 standards in which the terms anddefinitions appear are listed by number after the jurisdiction forthe term. The wording of an entry cannot be changed withoutthe approval of the subcommittee which has jurisdiction andsubcommittee D13.92 on Terminology. See 1.2, 1.3, 1.4.1.2 In addition to being a sp
5、ecialized dictionary, Terminol-ogy D 123 is also a tool for managing the committeesterminology. This includes finding, eliminating, and preventingredundancies, that is, where two or more terms relating thesame concept are defined in different words. Redundancies canalso occur when one definition is
6、used for two or more terms.1.3 While the review for clarity and form are the responsi-bility of the terminology subcommittee, the concept of man-aging terminology is the broad responsibility of every writer ofstandards, specifically the task group leader and subcommitteechairman.1.4 Subsequent to a
7、listing of specific subcommittee com-pilations, this standard is comprised of the following sectionsthat are listed in the order in which they appear.1.4.1 Alphabetical listing of terms and respective defini-tions.1.4.2 Ready reference guide.1.4.3 Annex A1 Generic names and definitions of manufac-tu
8、red fibers.1.4.4 Annex A2 Classification of manufactured and naturalfibers.1.4.5 Annex A3 Terms relating to the hand of fabrics.1.4.6 Annex A4 Terminology revision procedures.1.4.7 Annex A5 Industry accepted synonyms.1.4.8 Appendix X1 Other sources of textile terminology.2. Referenced Documents2.1 A
9、STM Standards:2D76 Specification for Tensile Testing Machines for TextilesD 122 Tolerances for Tire Fabrics Other Than Tire CordFabric3D 204 Test Methods for Sewing ThreadsD 276 Test Methods for Identification of Fibers in TextilesD 418 Methods of Testing Pile Yarn Floor Covering Con-struction3D 519
10、 Test Method for Length of Fiber in Wool TopD 434 Test Method for Resistance to Slippage of Yarns inWoven Fabrics Using a Standard Seam3D 461 Test Methods for Felt3D 519 Test Method for Length of Fiber in Wool TopD 578 Specification for Glass Fiber StrandsD 579 Specification for Greige Woven Glass F
11、abricsD 541 Specification for Single Jute Yarn3D 580 Specification for Greige Woven Glass Tapes andWebbingsD 581 Specification for Glass Fiber Greige Braided TubularSleevingD 584 Test Method for Wool Content of Raw WoolLaboratory ScaleD 629 Test Methods for Quantitative Analysis of TextilesD 737 Tes
12、t Method for Air Permeability of Textile FabricsD 861 Practice for Use of the Tex System to DesignateLinear Density of Fibers, Yarn Intermediates, and YarnsD 885 Test Methods for Tire Cords, Tire Cord Fabrics, andIndustrial Filament Yarns Made from ManufacturedOrganic-Base FibersD 1059 Test Method f
13、or Yarn Number Based on Short-Length SpecimensD 1060 Practice for Core Sampling of Raw Wool in Pack-ages for Determination of Percentage of Clean Wool FiberPresentD 1113 Test Method for Vegetable Matter and OtherAlkali-Insoluble Impurities in Scoured WoolD 1117 Guide for Evaluating Nonwoven Fabrics1
14、This terminology is under the jurisdiction ofASTM Committee D13 on Textilesand is the direct responsibility of Subcommittee D13.92 on Terminology.Current edition approved July 1, 2007. Published August 2007. Originallyapproved in 1921. Last previous edition approved in 2003 as D 123 03.2For referenc
15、ed ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Withdrawn.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C7
16、00, West Conshohocken, PA 19428-2959, United States.D 1224 Test Methods for Zinc and Cadmium in PaperD 1230 Test Method for Flammability of Apparel TextilesD 1233 Specification for Twine Made for Bast and LeafFiber3D 1234 Test Method of Sampling and Testing Staple Lengthof Grease WoolD 1244 Practice
17、 for Designation of Yarn ConstructionD 1282 Test Method for Resistance to Airflow as an Indi-cation of Average Fiber Diameter of Wool Top, CardSliver, and Scoured WoolD 1283 Test Method for Alkali-Solubility of WoolsD 1294 Test Method for Tensile Strength and BreakingTenacity of Wool Fiber Bundles 1
18、-in. (25.4-mm) GageLengthD 1319 Test Method for Hydrocarbon Types in LiquidPetroleum Products by Fluorescent Indicator AdsorptionD 1334 Test Method for Wool Content of Raw WoolCommercial ScaleD 1335 Test Method for Tuft Bind of Pile Yarn FloorCoveringsD 1388 Test Method for Stiffness of FabricsD 142
19、2 Test Method for Twist in Single Spun Yarns by theUntwist-Retwist MethodD 1423 Test Method for Twist in Yarns by Direct-CountingD 1424 Test Method for Tearing Strength of Fabrics byFalling-Pendulum Type (Elmendorf) ApparatusD 1425 Test Method for Unevenness of Textile StrandsUsing Capacitance Testi
20、ng EquipmentD 1440 Test Method for Length and Length Distribution ofCotton Fibers (Array Method)D 1441 Practice for Sampling Cotton Fibers for TestingD 1442 Test Method for Maturity of Cotton Fibers (SodiumHydroxide Swelling and Polarized Light Procedures)D 1445 Test Method for Breaking Strength and
21、 Elongationof Cotton Fibers (Flat Bundle Method)D 1447 Test Method for Length and Length Uniformity ofCotton Fibers by Fibrograph MeasurementD 1448 Test Method for Micronaire Reading of CottonFibersD 1464 Test Method for Differential Dyeing Behavior ofCottonD 1518 Test Method for Thermal Transmittan
22、ce of Tex-tile MaterialsD 1574 Test Method for Extractable Matter in Wool andOther Animal FibersD 1575 Test Method for Fiber Length of Wool in ScouredWool and in Card SliverD 1576 Test Method for Moisture in Wool by Oven-DryingD 1577 Test Methods for Linear Density of Textile FibersD 1578 Test Metho
23、d for Breaking Strength of Yarn in SkeinFormD 1682 Methods of Test for Breaking Load and Elongationof Textile Fabrics3D 1683 Test Method for Failure in Sewn Seams of WovenApparel FabricsD 1684 Practice for Lighting Cotton Classing Rooms forColor GradingD 1770 Test Method for Neps, Vegetable Matter,
24、and Col-ored Fiber in Wool TopD 1774 Test Methods for Breaking Load and Elongation ofTextile Fabrics3D 1775 Test Method for Tension and Elongation of WideElastic Fabric3D 1776 Practice for Conditioning and Testing TextilesD 1777 Test Method for Thickness of Textile MaterialsD 1769 Method of Test for
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMD1232007STANDARDTERMINOLOGYRELATINGTOTEXTILES 纺织 材料 相关 标准 术语 PDF

链接地址:http://www.mydoc123.com/p-509477.html