ARMY UFGS-02 81 00-2010 TRANSPORTATION AND DISPOSAL OF HAZARDOUS MATERIALS《危险品的运输和处理》.pdf

《ARMY UFGS-02 81 00-2010 TRANSPORTATION AND DISPOSAL OF HAZARDOUS MATERIALS《危险品的运输和处理》.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-02 81 00-2010 TRANSPORTATION AND DISPOSAL OF HAZARDOUS MATERIALS《危险品的运输和处理》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-02 81 00 (February 2010)-Preparing Activity: USACE SupersedingUFGS-02 81 00 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 02 - EXISTING CONDITIONSSECTION 02 81 00TRANSPO

2、RTATION AND DISPOSAL OF HAZARDOUS MATERIALS02/10PART 1 GENERAL1.1 REFERENCES1.2 DEFINITIONS1.2.1 Hazardous Material1.2.2 Hazardous Waste1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Transportation and Disposal Coordinator1.4.2 Training1.4.3 Certification1.4.4 Laws and Regulations RequirementsPART 2 PRODU

3、CTS2.1 MATERIALS2.1.1 Packagings2.1.2 Markings2.1.3 Labeling2.1.4 Placards2.1.5 Spill Response Materials2.2 EQUIPMENT AND TOOLSPART 3 EXECUTION3.1 ONSITE HAZARDOUS WASTE MANAGEMENT3.1.1 Hazardous Waste Classification3.1.2 Management Plan3.2 OFFSITE HAZARDOUS WASTE MANAGEMENT3.2.1 Treatment, Storage,

4、 and/or Disposal Facility and Transporter3.2.2 Status of the Facility3.2.3 Shipping Documents and Packagings Certification3.2.4 Transportation3.2.5 Treatment and Disposal of Hazardous Wastes3.3 RADIOACTIVE MATERIALS MANAGEMENT3.3.1 Identification of Proper Shipping NamesSECTION 02 81 00 Page 1Provid

5、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.3.2 Packaging, Labeling, and Marking3.3.3 Shipping Documents3.3.3.1 PCB Waste Shipment Documents3.3.3.2 Asbestos Waste Shipment Documents3.3.3.3 Other Hazardous Material Shipment Documents3.4 OBTAINING EPA

6、ID NUMBERS3.5 SPECIAL REQUIREMENTS FOR ASBESTOS WASTES3.6 WASTE MINIMIZATION3.7 RECORDKEEPING3.8 SPILL RESPONSE3.9 EMERGENCY CONTACTS- End of Section Table of Contents -SECTION 02 81 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / N

7、AVFAC / AFCESA / NASA UFGS-02 81 00 (February 2010)-Preparing Activity: USACE SupersedingUFGS-02 81 00 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION 02 81 00TRANSPORTATION AND DISPOSAL OF HAZARDOUS MATERIALS02/10*NOTE: This guide sp

8、ecification covers the requirements for transportation and disposal of hazardous material.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and re

9、quirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designation and

10、telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: This specification was developed for large management contracts where there is a technical evaluation in the selection process. For small purchases, portion

11、s of this specification may be applicable, but should be closely considered. This specification should be used in conjunction with the separate asbestos and PCB management specifications when work involves these hazardous materials.For other than remedial action, corrective action, or disposal of am

12、munition contract, add DFAR clause 252.223.-7005If work does not involve hazardous wastes, SECTION 02 81 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-submittals regarding the hazardous waste management plan, the EPA Biennial and State Ann

13、ual Reports, exceptions reports, and records of inspection may be removed by the designer.If work does not involve hazardous wastes, PCB waste, or asbestos containing waste, certificates of disposal may be removed by the designer.Regarding pre-established spill reporting procedures, the designer sho

14、uld consult CEMP-RT memorandum of 20 July 1995, Subject: Spill Reporting Procedures for USACE Personnel Involved in HTRW Projects or updated memorandum scheduled to be available by Jan 2004.Security planning requirements are newly promulgated (67 Federal Register 14509, March 25, 2003) and contain r

15、esponsibilities for both the offeror of the hazardous material as well as the transporter. Thus both the Government and Contractor have responsibilities for security planning that should be coordinated in the development of specific contract specifications. Implementation guidance is under developme

16、nt. The Government will NOT request development of, review, or approve the Contractors security plans. This is a legal requirements placed upon hazmat employers and transporters by DOT. The Government will require the Contractor to certify to the Government that either a security plan is in place or

17、 to document exemption from the security plan requirement. In developing this specification, Designers should determine whether this specification requires modification to address Agency specific requirements for pre-transportation security requirements in addition to transportation related security

18、 requirements.Regarding security plan certifications, for USACE the intent is to obtain a Contractor certification for pre-transportation activities as well as a separate certification from the initial transporter. Other agencies may take a different approach to implementing security planning requir

19、ements and specification should be modified accordingly.USACE projects require certificates of disposal for all hazardous waste, CERCLA remediation wastes, PCBs, radionuclide containing waste, and asbestos as per Engineering Pamphlet 415-1-266.*1.1 REFERENCES*NOTE: This paragraph is used to list the

20、 publications cited in the text of the guide specification. The publications are referred to in SECTION 02 81 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-the text by basic designation only and listed in this paragraph by organization, de

21、signation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not use

22、d in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text

23、by the basic designation only.ations are referenced in the text by basic designation only.INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA)IATA DGR (2004) Dangerous Goods RegulationsU.S. DEPARTMENT OF TRANSPORTATION (DOT)DOT 4500.9R Defense Transportation Regulation, Part 2, Cargo Movement, Chapter 204

24、, Hazardous MaterialU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)40 CFR 261 Identification and Listing of Hazardous Waste40 CFR 262 Standards Applicable to Generators of Hazardous Waste40 CFR 263 Standards Applicable to Transporters of Hazardous Waste40 CFR 264 Standards for Owners and Op

25、erators of Hazardous Waste Treatment, Storage, and Disposal Facilities40 CFR 265 Interim Status Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities40 CFR 266 Standards for the Management of Specific Hazardous Wastes and Specific Types of Hazardous Waste

26、Management Facilities40 CFR 268 Land Disposal Restrictions40 CFR 270 EPA Administered Permit Programs: The Hazardous Waste Permit ProgramSECTION 02 81 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-40 CFR 279 Standards for the Management of

27、 Used Oil40 CFR 300 National Oil and Hazardous Substances Pollution Contingency Plan40 CFR 302 Designation, Reportable Quantities, and Notification40 CFR 61 National Emission Standards for Hazardous Air Pollutants40 CFR 761 Polychlorinated Biphenyls (PCBs) Manufacturing, Processing, Distribution in

28、Commerce, and Use Prohibitions49 CFR 107 Hazardous Materials Program Procedures49 CFR 172 Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements49 CFR 173 Shippers - General Requirements for Shipments and Packaging

29、s49 CFR 178 Specifications for Packagings1.2 DEFINITIONS1.2.1 Hazardous MaterialA substance or material which has been determined by the Secretary of Transportation to be capable of posing an unreasonable risk to health, safety, and property when transported in commerce, and which has been so design

30、ated pursuant to the Hazardous Materials Transportation Act, 49 U.S.C. Appendix Section 1801 et seq. The term includes materials designated as hazardous materials under the provisions of 49 CFR 172, Sections .101 and .102 and materials which meet the defining criteria for hazard classes and division

31、s in 49 CFR 173. EPA designated hazardous wastes are also hazardous materials.1.2.2 Hazardous WasteA waste which meets criteria established in RCRA or specified by the EPA in 40 CFR 261 or which has been designated as hazardous by a RCRA authorized state program.1.3 SUBMITTALS*NOTE: Review submittal

32、 description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” following a submittal item indicates that the submittal req

33、uires Government approval. Some SECTION 02 81 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contract

34、ors Quality Control system. Only add a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate t

35、he approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Code

36、s following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having

37、 a “G“ designation are for Contractor Quality Control approval. information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-03 Produc

38、t DataOnsite Hazardous Waste Management; G; G, _Notices of Non-Compliance and Notices of ViolationPackaging NotificationsSD-06 Test ReportsRecordkeeping; G; G, _Spill ResponseException Report; G; G, _SD-07 CertificatesCertificationSecurity PlanTransportation and Disposal Coordinator; G; G, _Training

39、; G; G, _EPA Offsite PolicyCertificates of DisposalShipping Documents and Packagings Certification; G; G, _Waste Minimization; G; G, _SECTION 02 81 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.4 QUALITY ASSURANCE1.4.1 Transportation and

40、 Disposal CoordinatorDesignate, by position and title, one person to act as the Transportation and Disposal Coordinator (TDC) for this contract. The TDC shall serve as the single point of contact for all environmental regulatory matters and shall have overall responsibility for total environmental c

41、ompliance at the site including, but not limited to, accurate identification and classification of hazardous waste and hazardous materials; determination of proper shipping names; identification of marking, labeling, packaging and placarding requirements; completion of waste profiles, hazardous wast

42、e manifests, asbestos waste shipment records, PCB manifests, bill of ladings, exception and discrepancy reports; and all other environmental documentation. The TDC shall have, at a minimum, one year of specialized experience in the management and transportation of hazardous waste and have been Depar

43、tment of Transportation certified under 49 CFR 172, Subpart H.1.4.2 TrainingThe Contractors hazardous materials employees shall be trained, tested, and certified to safely and effectively carry out their assigned duties in accordance with Section 01 35 29.13 HEALTH, SAFETY, AND EMERGENCY RESPONSE PR

44、OCEDURES FOR CONTAMINATED SITES _. The Contractors employees transporting hazardous materials or preparing hazardous materials for transportation, including samples, shall be trained, tested, and certified in accordance with 49 CFR 172, Subpart H, including security awareness and any applicable secu

45、rity plans. Where shipment of hazardous materials by air may be occurring, such as for sample shipments, the Contractors hazardous material employees shall also be trained on IATA DGR. Contractor employees making determinations that shipments do not constitute DOT regulated hazardous materials shall also be trained, tested, and certified in accordance with 49 CFR 172, Subpart H.1.4.3 CertificationThe Contractor and/or subContractors transporting hazardous materials shall possess a c