ARMY UFGS-01 50 00-2009 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS《临时施工设备和控制》.pdf

《ARMY UFGS-01 50 00-2009 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS《临时施工设备和控制》.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-01 50 00-2009 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS《临时施工设备和控制》.pdf（23页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA /NASA UFGS-01 50 00 (August 2009)-Preparing Activity: USACE SupersedingUFGS-01 50 00 (October 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2009*SECTION TABLE OF CONTENTSDIVISION 01 - GENERAL REQUIREMENTSSECTION 01 50 00TEMPORAR

2、Y CONSTRUCTION FACILITIES AND CONTROLS08/09PART 1 GENERAL1.1 SUMMARY1.2 REFERENCES1.3 SUBMITTALS1.4 CONSTRUCTION SITE PLAN1.5 BACKFLOW PREVENTERS CERTIFICATE1.5.1 Backflow Tester Certificate1.5.2 Backflow Prevention Training CertificatePART 2 PRODUCTS2.1 TEMPORARY SIGNAGE2.1.1 Bulletin Board2.1.2 Pr

3、oject and Safety Signs2.2 TEMPORARY TRAFFIC CONTROL2.2.1 Haul Roads2.2.2 Barricades2.2.3 Fencing2.2.4 Temporary Wiring2.2.5 Backflow PreventersPART 3 EXECUTION3.1 EMPLOYEE PARKING3.2 AVAILABILITY AND USE OF UTILITY SERVICES3.2.1 Temporary Utilities3.2.2 Payment for Utility Services3.2.3 Meters and T

4、emporary Connections3.2.4 Advance Deposit3.2.5 Final Meter Reading3.2.6 Utilities at Special Locations3.2.6.1 Utilities at Guam by Contractor for Special Projects3.2.6.2 Utility Services at Midway3.2.7 Utility Services for Diego Garcia Projects3.2.7.1 Contractor-Owned and Operated Radio Telecommunic

5、ationsSECTION 01 50 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.2.7.2 Off-Island3.2.8 Utility Services for Wake Island3.2.9 Telephones at Midway, Wake, and Diego Garcia3.2.10 Electricity3.2.11 Water3.2.12 Sanitation3.2.13 Telephone3.2.

6、14 Obstruction Lighting of Cranes3.2.15 Fire Protection3.3 TRAFFIC PROVISIONS3.3.1 Maintenance of Traffic3.3.2 Protection of Traffic3.3.3 Rush Hour Restrictions3.3.4 Dust Control3.3.5 Commercial Vehicles In/Out of NAVSTA/NAS Norfolk, VA3.4 CONTRACTORS TEMPORARY FACILITIES3.4.1 Safety3.4.2 Administra

7、tive Field Offices3.4.3 Storage Area3.4.4 Supplemental Storage Area3.4.5 Appearance of Trailers3.4.6 Trailers or Storage Buildings3.4.7 Maintenance of Storage Area3.4.8 New Building3.4.9 Security Provisions3.4.10 Storage Size and Location3.4.11 Storage in Existing Buildings3.4.12 Weather Protection

8、of Temporary Facilities and Stored Materials3.4.12.1 Building and Site Storm Protection3.4.12.2 TyphoonHurricane Condition of Readiness3.5 GOVERNMENT FIELD OFFICE3.5.1 Resident Engineers Office3.5.2 Quality Control Manager Records and Field Office3.5.3 Trailer-Type Mobile Office3.6 PLANT COMMUNICATI

9、ON3.7 TEMPORARY PROJECT SAFETY FENCING3.8 CLEANUP3.9 RESTORATION OF STORAGE AREA- End of Section Table of Contents -SECTION 01 50 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA /NASA UFGS-01 50 00 (August 2009)-Prep

10、aring Activity: USACE SupersedingUFGS-01 50 00 (October 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2009*SECTION 01 50 00TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS08/09*NOTE: This specification covers the requirements for temporary construction fa

11、cilities, safety systems, construction traffic provisions, construction signage and controls over contractor operations required for use in all projects.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items

12、(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of tech

13、nical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).This guide specification includes tailoring options for SOUTHDIV; SW DIV; NAVY; NASA; ARMY,NAVY; LANTDIV; LANTDIV,

14、PACDIV; PACDIV; and EFA MW. Selection or deselection of a tailoring option will include or exclude that option in the section, but editing the resulting section to fit the project is still required.*PART 1 GENERAL*NOTE: TO DOWNLOAD UFGS GRAPHICS go to:http:/www.wbdg.org/ccb/NAVGRAPH/graphtoc.pdf.SEC

15、TION 01 50 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-On the drawings, show:1. Location of temporary buildings and storage areas, if specified;2. Location of temporary utility connections, if specified.*1.1 SUMMARYRequirements of this S

16、ection apply to, and are a component of, each section of the specifications.1.2 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organi

17、zation, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.Referenc

18、es not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within

19、 the text by the basic designation only.AMERICAN WATER WORKS ASSOCIATION (AWWA)AWWA C511 (2007) Standard for Reduced-Pressure Principle Backflow Prevention AssemblyFOUNDATION FOR CROSS-CONNECTION CONTROL AND HYDRAULIC RESEARCH (FCCCHR)FCCCHR List (continuously updated) List of Approved Backflow Prev

20、ention AssembliesFCCCHR Manual (1988e9) Manual of Cross-Connection ControlNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 241 (2009) Standard for Safeguarding Construction,Alteration, and Demolition OperationsSECTION 01 50 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted

21、 without license from IHS-,-,-NFPA 70 (2008; AMD 1 2008) National Electrical Code - 2008 EditionU.S. FEDERAL AVIATION ADMINISTRATION (FAA)FAA AC 70/7460-1 (Rev K) Obstruction Marking and LightingU.S. FEDERAL HIGHWAY ADMINISTRATION (FHWA)MUTCD (2000) Manual of Uniform Traffic Control Devices1.3 SUBMI

22、TTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” following a submittal item indi

23、cates that the submittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is sufficiently important or comp

24、lex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) ar

25、e: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the

26、first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval.information only. When used, a

27、 designation following the “G“ designation identifies the office that will review the submittal for the Government. Submitted the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-01 Preconstruction Submittals*SECTION 01 50 00 Page 5Provided by IHSNot for ResaleNo reproduction or

28、 networking permitted without license from IHS-,-,-NOTE: The following submittal must be included for SOUTHDIV projects at the Charleston Air Force Base and for other SOUTHDIV projects, as determined by the Contracting Officer, based on project size, scope, complexity, and visibility.* Construction

29、site plan; G; G, _ Traffic control plan; G; G, _SD-03 Product Data*NOTE: Include the following for all projects connecting to a potable water supply.*Backflow preventers; G; G, _SD-06 Test ReportsBackflow Preventer Tests; G; G, _SD-07 CertificatesBackflow Tester Certification; G; G, _*NOTE: Include

30、the following for all projects connecting to a potable water supply.* Backflow Preventers Certificate of Full Approval1.4 CONSTRUCTION SITE PLANPrior to the start of work, submit a site plan showing the locations and dimensions of temporary facilities (including layouts and details, equipment and ma

31、terial storage area (onsite and offsite), and access and haul routes, avenues of ingress/egress to the fenced area and details of the fence installation. Identify any areas which may have to be graveled to prevent the tracking of mud. Indicate if the use of a supplemental or other staging area is de

32、sired. Show locations of safety and construction fences, site trailers, construction entrances, trash dumpsters, temporary sanitary facilities, and worker parking areas.1.5 BACKFLOW PREVENTERS CERTIFICATECertificate of Full Approval from FCCCHR List, University of Southern California, attesting that

33、 the design, size and make of each backflow preventer has satisfactorily passed the complete sequence of performance testing and evaluation for the respective level of approval. Certificate of Provisional Approval will not be acceptable.1.5.1 Backflow Tester CertificatePrior to testing, submit to th

34、e Contracting Officer certification issued by the State or local regulatory agency attesting that the backflow tester has successfully completed a certification course sponsored by the regulatory SECTION 01 50 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without lice

35、nse from IHS-,-,-agency. Tester must not be affiliated with any company participating in any other phase of this Contract.1.5.2 Backflow Prevention Training CertificateSubmit a certificate recognized by the State or local authority that states the Contractor has completed at least 10 hours of traini

36、ng in backflow preventer installations. The certificate must be current.PART 2 PRODUCTS2.1 TEMPORARY SIGNAGE2.1.1 Bulletin BoardImmediately upon beginning of work, provide a weatherproof glass-covered bulletin board not less than 915 by 1220 mm 36 by 48 inches in size for displaying the Equal Employ

37、ment Opportunity poster, a copy of the wage decision contained in the contract, Wage Rate Information poster, and other information approved by the Contracting Officer. Locate the bulletin board at the project site in a conspicuous place easily accessible to all employees, as approved by the Contrac

38、ting Officer.2.1.2 Project and Safety SignsThe requirements for the signs, their content, and location are as shown on the drawings and as specified in Section 01 58 00 PROJECT IDENTIFICATION. Erect signs within 15 days after receipt of the notice to proceed. Correct the data required by the safety

39、sign daily, with light colored metallic or non-metallic numerals.2.2 TEMPORARY TRAFFIC CONTROL2.2.1 Haul RoadsAt contractors expense construct access and haul roads necessary for proper prosecution of the work under this contract. Construct with suitable grades and widths; sharp curves, blind corner

40、s, and dangerous cross traffic are be avoided. Provide necessary lighting, signs, barricades, and distinctive markings for the safe movement of traffic. The method of dust control, although optional, must be adequate to ensure safe operation at all times. Location, grade, width, and alignment of con

41、struction and hauling roads are subject to approval by the Contracting Officer. Lighting must be adequate to assure full and clear visibility for full width of haul road and work areas during any night work operations.2.2.2 BarricadesErect and maintain temporary barricades to limit public access to

42、hazardous areas. Whenever safe public access to paved areas such as roads, parking areas or sidewalks is prevented by construction activities or as otherwise necessary to ensure the safety of both pedestrian and vehicular traffic barricades will be required. Securely place barricades clearly visible

43、 with adequate illumination to provide sufficient visual warning of the hazard during both day and night.2.2.3 Fencing*SECTION 01 50 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTE: Fencing requirements must be evaluated based on the exposure potential of the construction site to the public. The public is considered as any non-construction personnel. Minimum fencing may range from nylon fabric (reinforced by a top supporting cable to provide adequate strength to provide needed physica