ARMY MIL-PRF-39014 22 F-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (GENERAL PURPOSE) ESTABLISHED RELIABILITY STYLES CKR22 CKR23 AND CKR24.pdf

《ARMY MIL-PRF-39014 22 F-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (GENERAL PURPOSE) ESTABLISHED RELIABILITY STYLES CKR22 CKR23 AND CKR24.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-PRF-39014 22 F-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (GENERAL PURPOSE) ESTABLISHED RELIABILITY STYLES CKR22 CKR23 AND CKR24.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5910 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.INCH-POUND MIL-PRF-39014/22F 28 October 2011 SUPERSEDING MIL-PRF-39014/22E 7 December 2006 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), ESTABLISHED RELIABILI

2、TY, STYLES CKR22, CKR23, AND CKR24 This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-39014. FIGURE 1. Style CKR22, CKR23, and CKR

3、24 capacitors. Dimensions Style A .007 B CKR22 .128 .175 CKR23 .155 .195 CKR24 .283 .320 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39014/22F 2 Inches mm Inches mm .004 .006 .010 .012 .015 .019 .020 .035 .058 .090 0.10 0.15 0.25 0.30 0.3

4、8 0.48 0.51 0.89 1.47 2.29 .092 .128 .155 .165 .185 .260 .283 .320 .325 2.34 3.25 3.94 4.19 4.70 6.60 7.19 8.13 8.26 NOTES: 1. Leads shall be centered within .005 inches (0.13 mm). 2. The angle shall be 95 +10, -5. 3. Dimensions are in inches. 4. Metric equivalents are given for general information

5、only. 5. For standard lead length: .140 .020 inch (3.56 0.51 mm); for optional longer lead length: .170 .010 inch (4.32 0.25 mm). 6. The distance between the centers of the mounting holes will be .300 .010 inches (7.62 0.25 mm). 7. Nonconductive material shall not extend beyond .030 inches (0.76 mm)

6、 from the edge of the capacitor body. FIGURE 1. Style CKR22, CKR23, and CKR24 capacitors - Continued. REQUIREMENTS: Dimensions and configuration: See figure 1. Case type: Molded plastic encapsulated. Capacitance value: See table III. Capacitance tolerance: D = .5 pF, F = 1 percent, J = 5 percent, K

7、= 10 percent, M = 20 percent. Operating temperature range: -55 to +125C. Voltage rating: See table III. Dissipation factor: See table I. Dielectric withstanding voltage: Body insulation shall be able to withstand 500 V dc between leads and case. Insulation resistance (IR): At +25C: Not less than 100

8、,000 megohms or 1,000 megohm-microfarads, whichever is less. At +125C: Not less than 10,000 megohms or 100 megohm-microfarads, whichever is less. Voltage-temperature limits: See table I. For capacitors with values of 18 pF or less, the voltage-temperature limits tolerance shall be determined in acco

9、rdance with table II. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39014/22F 3 TABLE I. Dissipation factors and voltage-temperature limits. Capacitance change with reference to +25C Characteristic symbol Step A through step D table VI of M

10、IL-PRF-39014 Bias = 0 volts Step E through step G table VI of MIL-PRF-39014 Bias = rated voltage Dissipation factor (percent) CG CH 0 30 ppm/C 0 60 ppm/C 1/ 0 30 ppm/C 0 60 ppm/C 1/ .15 .15 BX 15 percent +15, -25 percent as applicable 2.5 BR 15 percent +15, -40 percent as applicable 3.0 1/ See table

11、 II for capacitance values less than 20 pF. TABLE II. Voltage-temperature limits for capacitance values of 18 pF or less. Voltage-temperature limits for capacitance values of 18 pF or less Capacitance values (pF) Voltage-temperature coefficient tolerance 1.0 - 1.8 Not measurable 2.2 - 3.9 0 250 ppm/

12、C 4.7 - 6.8 0 120 ppm/C 8.2 - 18.0 0 60 ppm/C Immersion: IR: Not less than 50 percent of initial +25C requirements. Resistance to soldering heat: C: 5 percent or .25 pF, whichever is greater for CG and CH characteristics. C: +15, -5 percent of the initial +25C measurement for characteristics BX and

13、BR. DF: Not to exceed the initial limit. IR: Not less than initial +25C limit. Terminal strength: Method 211 of MIL-STD-202, condition B, except that each lead shall be bent away from the body 90 from the original position (see figure 1) and back, two bends. Provided by IHSNot for ResaleNo reproduct

14、ion or networking permitted without license from IHS-,-,-MIL-PRF-39014/22F 4 Life: Rated conditions, 100 percent of dc rated voltage at +125C. 0 hour through 3,000 hours: IR: At +25C, not less than 50 percent of initial +25C requirement. At +125C, not less than 50 percent of initial +125C requiremen

15、t. C: 5 percent or .5 pF, whichever is greater, from initial measured value for CG and CH characteristics 20 percent from initial measured value for characteristics BX and BR. Dissipation factor: Not to exceed the initial limit. 4,000 hours through 32,000 hours: IR: At +25C, not less than 15 percent

16、 of initial +25C requirement. At +125C, not less than 15 percent of initial +125C requirement. C: 5 percent or .5 pF, whichever is greater, from initial measured value for CG and CH characteristics 20 percent from initial measured value for characteristics BX and BR. Dissipation factor: Not to excee

17、d the initial limit. Accelerated condition, 200 percent of dc rated voltage at +125C. 0 hour and 250 hours: IR: At +25C, not less than 50 percent of initial +25C requirement. At +125C, not less than 50 percent of initial +125C requirement. C: 5 percent or .5 pF, whichever is greater from initial mea

18、sured value for CG and CH characteristics 20 percent from initial measured value for characteristics BX and BR. Dissipation factor: Not to exceed the initial limit. 1,000 hours, 2,000 hours, and 4,000 hours: IR: At +25C, not less than 15 percent of initial +25C requirement. At +125C, not less than 1

19、5 percent of initial +125C requirement. C: 20 percent from initial measured value. Dissipation factor: Not to exceed the initial limit. Part or Identifying Number (PIN): - M39014/22- (dash number from table III) (e.g. M39014/22-0001). Marking: In accordance with MIL-PRF-39014, except that minimum ma

20、rking as shown in the following example, shall be used. Full marking shall be included on the package. 0001 T 801 Dash number Manufacturers Date code Marking example trademark (year and week) TOP VIEW 0001T801 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

21、IHS-,-,-MIL-PRF-39014/22F 5 TABLE III. Dash numbers and electrical characteristics. Dash number Failure rate level (%/1,000 hours) Capaci- tance (pF) Capaci- tance tolerance DC rated voltage (volts) Standard lead length 1/ Optional longer lead length 1/ 1.0(M) 0.1(P) 0.01(R) 0.001(S) 1.0(M) 0.1(P) 0

22、.01(R) 0.001(S) Style CKR22, see table II for voltage-temperature limits. 0001 0301 0601 0901 3001 3301 3601 3901 1.0 D 200 0004 0304 0604 0904 3004 3304 3604 3904 1.2 D 200 0007 0307 0607 0907 3007 3307 3607 3907 1.5 D 200 0010 0310 0610 0910 3010 3310 3610 3910 1.8 D 200 0013 0313 0613 0913 3013 3

23、313 3613 3913 2.2 D 200 0016 0316 0616 0916 3016 3316 3616 3916 2.7 D 200 0019 0319 0619 0919 3019 3319 3619 3919 3.3 D 200 0022 0322 0622 0922 3022 3322 3622 3922 3.9 D 200 0025 0325 0625 0925 3025 3325 3625 3925 4.7 D 200 0028 0328 0628 0928 3028 3328 3628 3928 5.6 D 200 0031 0331 0631 0931 3031 3

24、331 3631 2931 6.8 D 200 0034 0334 0634 0934 3034 3334 3634 3934 8.2 D 200 0037 0337 0637 0937 3037 3337 3637 3937 10 D 200 0038 0338 0638 0938 3038 3338 3638 3938 10 J 200 0039 0339 0639 0939 3039 3339 3639 3939 10 K 200 0040 0340 0640 0940 3040 3340 3640 3940 12 D 200 0041 0341 0641 0941 3041 3341

25、3641 3941 12 J 200 0042 0342 0642 0942 3042 3342 3642 3942 12 K 200 0043 0343 0643 0943 3043 3343 3643 3943 15 D 200 0044 0344 0644 0944 3044 3344 3644 3944 15 J 200 0045 0345 0645 0945 3045 3345 3645 3945 15 K 200 0046 0346 0646 0946 3046 3346 3646 3946 18 D 200 0047 0347 0647 0947 3047 3347 3647 3

26、947 18 J 200 0048 0348 0648 0948 3048 3348 3648 3948 18 K 200 Style CKR22, Characteristic CG (voltage-temperature limits of 0 30 ppm/C). 0049 0349 0649 0949 3049 3349 3649 3949 22 D 200 0050 0350 0650 0950 3050 3350 3650 3950 22 J 200 0051 0351 0651 0951 3051 3351 3651 3951 22 K 200 0052 0352 0652 0

27、952 3052 3352 3652 3952 27 D 200 0053 0353 0653 0953 3053 3353 3653 3953 27 J 200 0054 0354 0654 0954 3054 3354 3654 3954 27 K 200 0055 0355 0655 0955 3055 3355 3655 3955 33 D 200 0056 0356 0656 0956 3056 3356 3656 3956 33 J 200 0057 0357 0657 0957 3057 3357 3657 3957 33 K 200 0058 0358 0658 0958 30

28、58 3358 3658 3958 39 D 200 0059 0359 0659 0959 3059 3359 3659 3959 39 J 200 0060 0360 0660 0960 3060 3360 3660 3960 39 K 200 0061 0361 0661 0961 3061 3361 3661 3961 47 D 200 0062 0362 0662 0962 3062 3362 3662 3962 47 J 200 0063 0363 0663 0963 3063 3363 3663 3963 47 K 200 0064 0364 0664 0964 3064 336

29、4 3664 3964 56 D 200 0065 0365 0665 0965 3065 3365 3665 3965 56 J 200 0066 0366 0666 0966 3066 3366 3666 3966 56 K 200 0067 0367 0667 0967 3067 3367 3667 3967 68 F 200 0068 0368 0668 0968 3068 3368 3668 3968 68 J 200 0069 0369 0669 0969 3069 3369 3669 3969 68 K 200 0070 0370 0670 0970 3070 3370 3670

30、 3970 82 F 200 0071 0371 0671 0971 3071 3371 3671 3971 82 J 200 0072 0372 0672 0972 3072 3372 3672 3972 82 K 200 0073 0373 0673 0973 3073 3373 3673 3973 100 F 200 0074 0374 0674 0974 3074 3374 3674 3974 100 J 200 See footnote at end of table. Provided by IHSNot for ResaleNo reproduction or networkin

31、g permitted without license from IHS-,-,-MIL-PRF-39014/22F 6 TABLE III. Dash numbers and electrical characteristics - Continued. Dash number Failure rate level (%/1,000 hours) Capaci- tance (pF) Capaci- tance tolerance DC rated voltage (volts) Standard lead length 1/ Optional longer lead length 1/ 1

32、.0(M) 0.1(P) 0.01(R) 0.001(S) 1.0(M) 0.1(P) 0.01(R) 0.001(S) Style CKR22, Characteristic CG (voltage-temperature limits of 0 30 ppm/C) - Continued. 0075 0375 0675 0975 3075 3375 3675 3975 100 K 200 0076 0376 0676 0976 3076 3376 3676 3976 120 F 200 0077 0377 0677 0977 3077 3377 3677 3977 120 J 200 00

33、78 0378 0678 0978 3078 3378 3678 3978 120 K 200 0079 0379 0679 0979 3079 3379 3679 3979 150 F 200 0080 0380 0680 0980 3080 3380 3680 3980 150 J 200 0081 0381 0681 0981 3081 3381 3681 3981 150 K 200 0082 0382 0682 0982 3082 3382 3682 3982 180 F 200 0083 0383 0683 0983 3083 3383 3683 3983 180 J 200 00

34、84 0384 0684 0984 3084 3384 3684 3984 180 K 200 0085 0385 0685 0985 3085 3385 3685 3985 220 F 200 0086 0386 0686 0986 3086 3386 3686 3986 220 J 200 0087 0387 0687 0987 3087 3387 3687 3987 220 K 200 0088 0388 0688 0988 3038 3338 3638 3938 270 F 200 0089 0389 0689 0989 3089 3389 3689 3989 270 J 200 00

35、90 0390 0690 0990 3090 3390 3690 3990 270 K 200 0091 0391 0691 0991 3091 3391 3691 3991 330 F 200 0092 0392 0692 0992 3092 3392 3692 3992 330 J 200 0093 0393 0693 0993 3093 3393 3693 3993 330 K 200 0094 0394 0694 0994 3094 3394 3694 3994 390 F 200 0095 0395 0695 0995 3095 3395 3695 3995 390 J 200 00

36、96 0396 0696 0996 3096 3396 3696 3996 390 K 200 0097 0397 0697 0997 3097 3397 3697 3997 470 F 200 0098 0398 0698 0998 3098 3398 3698 3998 470 J 200 0099 0399 0699 0999 3099 3399 3699 3999 470 K 200 0100 0400 0700 1000 3100 3400 3700 4000 560 F 100 0101 0401 0701 1001 3101 3401 3701 4001 560 J 100 01

37、02 0402 0702 1002 3102 3402 3702 4002 560 K 100 0103 0403 0703 1003 3103 3403 3703 4003 680 F 100 0104 0404 0704 1004 3104 3404 3704 4004 680 J 100 0105 0405 0705 1005 3105 3405 3705 4005 680 K 100 0106 0406 0706 1006 3106 3406 3706 4006 820 F 100 0107 0407 0707 1007 3107 3407 3707 4007 820 J 100 01

38、08 0408 0708 1008 3108 3408 3708 4008 820 K 100 0109 0409 0709 1009 3109 3409 3709 4009 1,000 F 100 0110 0410 0710 1010 3110 3410 3710 4010 1,000 J 100 0111 0411 0711 1011 3111 3411 3711 4011 1,000 K 100 0112 0412 0712 1012 3112 3412 3712 4012 1,200 F 100 0113 0413 0713 1013 3113 3413 3713 4013 1,20

39、0 J 100 0114 0414 0714 1014 3114 3414 3714 4014 1,200 K 100 0115 0415 0715 1015 3115 3415 3715 4015 1,500 F 100 0116 0416 0716 1016 3116 3416 3716 4016 1,500 J 100 0117 0417 0717 1017 3117 3417 3717 4017 1,500 K 100 0118 0418 0718 1018 3118 3418 3718 4018 1,800 F 100 0119 0419 0719 1019 3119 3419 37

40、19 4019 1,800 J 100 0120 0420 0720 1020 3120 3420 3720 4020 1,800 K 100 0121 0421 0721 1021 3121 3421 3721 4021 2,200 F 100 0122 0422 0722 1022 3122 3422 3722 4022 2,200 J 100 0123 0423 0723 1023 3123 3423 3723 4023 2,200 K 100 0124 0424 0724 1024 3124 3424 3724 4024 2,700 F 50 0125 0425 0725 1025 3

41、125 3425 3725 4025 2,700 J 50 See footnote at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39014/22F 7 TABLE III. Dash numbers and electrical characteristics - Continued. Dash number Failure rate level (%/1,000 hours) Capaci-

42、 tance (pF) Capaci- tance tolerance DC rated voltage (volts) Standard lead length 1/ Optional longer lead length 1/ 1.0(M) 0.1(P) 0.01(R) 0.001(S) 1.0(M) 0.1(P) 0.01(R) 0.001(S) Style CKR22, Characteristic CG (voltage-temperature limits of 0 30 ppm/C) - Continued. 0126 0426 0726 1026 3126 3426 3726

43、4026 2,700 K 50 0127 0427 0727 1027 3127 3427 3727 4027 3,300 F 50 0128 0428 0728 1028 3128 3428 3728 4028 3,300 J 50 0129 0429 0729 1029 3129 3429 3729 4029 3,300 K 50 0130 0430 0730 1030 3130 3430 3730 4030 3,900 F 50 0131 0431 0731 1031 3131 3431 3731 4031 3,900 J 50 0132 0432 0732 1032 3132 3432

44、 3732 4032 3,900 K 50 0133 0433 0733 1033 3133 3433 3733 4033 4,700 F 50 0134 0434 0734 1034 3134 3434 3734 4034 4,700 J 50 0135 0435 0735 1035 3135 3435 3735 4035 4,700 K 50 0136 0436 0736 1036 3136 3436 3736 4036 5,600 F 50 0137 0437 0737 1037 3137 3437 3737 4037 5,600 J 50 0138 0438 0738 1038 313

45、8 3438 3738 4038 5,600 K 50 0139 0439 0739 1039 3139 3439 3739 4039 6,800 F 50 0140 0440 0740 1040 3140 3440 3740 4040 6,800 J 50 0141 0441 0741 1041 3141 3441 3741 4041 6,800 K 50 0142 0442 0742 1042 3142 3442 3742 4042 8,200 F 50 0143 0443 0743 1043 3143 3443 3743 4043 8,200 J 50 0144 0444 0744 10

46、44 3144 3444 3744 4044 8,200 K 50 0145 0445 0745 1045 3145 3445 3745 4045 10,000 F 50 0146 0446 0746 1046 3146 3446 3746 4046 10,000 J 50 0147 0447 0747 1047 3147 3447 3747 4047 10,000 K 50 Style CKR22, Characteristic BX (voltage-temperature limits of 15% and +15, -25%) 0148 0448 0748 1048 3148 3448

47、 3748 4048 270 K 200 0149 0449 0749 1049 3149 3449 3749 4049 330 K 200 0150 0450 0750 1050 3150 3450 3750 4050 330 M 200 0151 0451 0751 1051 3151 3451 3751 4051 390 K 200 0152 0452 0752 1052 3152 3452 3752 4052 470 K 200 0153 0453 0753 1053 3153 3453 3753 4053 470 M 200 0154 0454 0754 1054 3154 3454

48、 3754 4054 560 K 200 0155 0455 0755 1055 3155 3455 3755 4055 680 K 200 0156 0456 0756 1056 3156 3456 3756 4056 680 M 200 0157 0457 0757 1057 3157 3457 3757 4057 820 K 200 0158 0458 0758 1058 3158 3458 3758 4058 1,000 K 100 0159 0459 0759 1059 3159 3459 3759 4059 1,000 M 100 0160 0460 0760 1060 3160

49、3460 3760 4060 1,200 K 100 0161 0461 0761 1061 3161 3461 3761 4061 1,500 K 100 0162 0462 0762 1062 3162 3462 3762 4062 1,500 M 100 0163 0463 0763 1063 3163 3463 3763 4063 1,800 K 100 0164 0464 0764 1064 3164 3464 3764 4064 2,200 K 100 0165 0465 0765 1065 3165 3465 3765 4065 2,200 M 100 0166 0466 0766 1066 3166 34