AIR FORCE MIL-PRF-38311 C-1997 MANUALS TECHNICAL OPERATION AND ASSOCIATED CHECKLIST (INTERCONTINENTAL BALLISTIC MISSILE) PREPARATION OF《技术手册 操作及相关检查清单(洲际弹道导弹)的制备》.pdf

《AIR FORCE MIL-PRF-38311 C-1997 MANUALS TECHNICAL OPERATION AND ASSOCIATED CHECKLIST (INTERCONTINENTAL BALLISTIC MISSILE) PREPARATION OF《技术手册 操作及相关检查清单(洲际弹道导弹)的制备》.pdf》由会员分享，可在线阅读，更多相关《AIR FORCE MIL-PRF-38311 C-1997 MANUALS TECHNICAL OPERATION AND ASSOCIATED CHECKLIST (INTERCONTINENTAL BALLISTIC MISSILE) PREPARATION OF《技术手册 操作及相关检查清单(洲际弹道导弹)的制备》.pdf（17页珍藏版）》请在麦多课文档分享上搜索。

1、NIL-PRF-38311C W 9999906 2066976 157 NOT MEASUREMENT SENSITIVE 9 December 1997 SUPERSEDING 17 February 1993 MIL-PRF-383 1 i C MIL-M-3831lB PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: OPERATION AND ASSOCIATED CHECKLIST (INTERCONTINENTAL BALL1 STIC MIS SILE) PREPARATION OF This specification is appr

2、oved for use by the Space and Missile Systems Center, Department of the Air Force, and is available for use by ail Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 This specification covers requirements for the preparation of operation manuais and associated checklists for Interco

3、ntinental Ballistic Missiles (ICBMs). 1.2 Types of manuals. Two types of operation manuals and associated checklists are covered by this specification. The types of manuals and associated checklists to be prepared will be designated by the acquiring activity. a. Operation Manual - See 3.2. b. Classi

4、fied Manual - See 3.3. c. Checklist - See 3.4. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: SMCIAXM, 160 Skynet, El Segundo, CA 90245 by using the self-addressed Standardization Document Impr

5、ovement Proposal (DD Form 1426) appearing at the end of this document or by letter. ASMC F4808 AREA TMSS DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesMIL-PRF-383LLC 9999906 20bb977 093 MIL PRF 383 1 1 (USAF) 2. APPLICABLE

6、DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ens

7、ure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed. 2.2 Government documents. 2.2.1 SDecifications. standards and handbooks. The following specificati

8、ons, standards and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitatio

9、n (see 6.2). STANDARDS MILITARY MIL-STD-12 Abbreviations for Use on Drawings and in Specifications, Standards and Technical Documents MIL-STD- 1 7 Mechanical Symbols MIL-STD-681 Identification Coding and Application of Hook-Up and Lead Wire MIL-STD- 1 840 Automated Interchange of Technical Informati

10、on MIL-STD-38784 Manuals, Technical: General Style and Format Requirements (Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 1 1-5094.) 2.3 Non-Go

11、vernment mblications. The following documents form a part of this specification to the extent specified herein. Unless otherwise indicated, the issues of the documents which are DoD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues

12、of documents not listed in the DODISS are the issues of the documents cited in the soiicitation (see 6.2). AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) 2 Licensed by Information Handling Servicesv t MIL PRF 383 1 1 (USAF) ANSIOEEE Y32.2-1975, Graphic Symbols for Electrical and Electronic Diagrams AN

13、SIAEEE 200-1 975 Electrical and Electronic Parts and Equipment Reference Designators (Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informa

14、tional services.) 2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited herein (except for related associated specifications or specification sheets), the text of this document takes precedence. Nothing in this document, however, supersedes ap

15、plicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 General manner of preparation. Unless otherwise specified, the general manner of preparation of the technical manuals shall be in accordance with MIL-STD-38784. They shall be prepared in the form specifi

16、ed in the contract. All details of MIL-STD-38784 relative to flight manuais which reference “aircraft” flight manuais shall apply to missile operation manuals. Statements to be included in missile operation manuais shall be reworded accordingly. 3.1.1 Illustrations. 3.1.1.1 Operation manual illustra

17、tions. The operation manual shall contain the following illustrations: a. A general arrangement illustration depicting a typical launch, flight sequence. b. Sufficient illustrations to clearly show a typical launch facility. c. Sufficient other illustrations and diagrams to show the major panels, ca

18、binets, consoles, and related equipment with which missile combat crew personnel have contact. d. Sufficient diagrams, charts, and schematics to depict the function, control, and interrelationship of significant weapon system equipment operation, countdown functions, and system or subsystem operatio

19、n. e. Abbreviations, symbols, reference designations and color coding reference used in the manual shall be in accordance with MIL-STD-12, ANSIAEEE Y32.2-1975, ANSIAEEE 200-1 975, MIL-STD-17 or MIL-STD-68 1 unless otherwise specified in this specification. For digitized technical data, MIL-STD-184OA

20、 will be used. 3 Licensed by Information Handling Services3.1.1.2 Tmes of illustrations. Determination of the type of illustration to be used shall be in accordance with MIL-STD-38784 and as directed by the acquiring activity. 3.1.2 m. 3.1.2.1 Stvle of presentation. Wherever practical, text shall be

21、 simplified and decreased in quantity by the use of complementary art work. All technical matter shall be reduced to language understandable by the personnel who are expected to use the manual. The target reading grade level for ICBM operations manuals shall be “9” as computed in MIL-STD-38784. 3.1.

22、2.2 Paragraph headings. The heading of the first or introductory paragraph of each chapter should be general in nature to facilitate the inclusion of information concerning the main subject. The subordinate paragraph headings should be definitive and identi an indication of the technical proficiency

23、 expected of using personnel; a discussion of format and content; and, special interest items, e.g., new developments and a brief description of notes, cautions and warnings. 5 Licensed by Information Handling ServicesMIL PRF 383 1 1 (USAF) 3.2.4.3 Chapter 1. Weapon System Description. Chapter 1 sha

24、ll describe the weapon system and supporting facilities in sufficient detail to afford the reader a single source document of general system information. A brief narrative shall describe the purpose, main features and leading particulars for the weapon system as described below. Illustrations that c

25、larifi a particular system or reduce the verbiage necessary for explanation shall be included. 3.2.4.3.1 Description of the missile. A description of the missile with reference to the number of stages, type of propulsion guidance, and range shall be included. This chapter shall contain no informatio

26、n which could result in the necessity to classi the manual. Subsequent paragraphs shall describe in greater detail subsystems peculiar to that weapon system. Such information shall include a general discussion of missile operation to include a description of major subsystems. The description shall b

27、e of sufficient detail to provide an understanding of the purpose and function of the subsystems, their relation to overall system operation, and such additional information as to enable the crew member to understand subsystem functions peculiar to the weapon system. This chapter shall also identi t

28、he various major components of the weapon system; Le., Aerospace Vehicle Equipment (AVE), Operational Support Equipment (TSE) and Real Property Installed Equipment (WIE) as it applies to the system. a. Guidance system. A discussion of system guidance shall include: a brief description of the purpose

29、 and type of guidance and a more detailed description of the components and their respective functions. Illustrations shall be used to simplifj explanation of system interrelation and component function. b. Propulsion system. Information shall include a description of the rocket engine(s), type of p

30、ropellant, and sufficient detail on operation and configuration of engine components to provide an understanding of system operation. c. Airframe. Discussion shall include the number of stages, and the dimensions and functions of each stage. Particular data concerning tank structure, skin, stringers

31、, and fiame shall be included, if necessary, to afford a better understanding of missile construc tion. 3.2.4.3.2 Launch facilities. A general description of the physical layout, including location and function of support systems to include security, personnel access, and power systems, shall be inc

32、luded. Detailed discussion should include the launcher and associated support equipment required for system monitoring, launch preparation, and launch as they support MCCM operations. 3.2.4.3.3 Communications. A description of the communications systems will include, but not be limited to, Higher Au

33、thority, Command and Control, Emergency War Order, Secure Voice, Secure Data, Intrawing, Intersite, Intercom and Administrative Communications Systems. Any MCCM activity regarding normal emergency or malfunction operations will be addressed in the applicable chapter. Some highly complex ICBM communi

34、cations systems may require a stand- alone Communication Command and Control Operations manual. 6 Licensed by Information Handling Servicesi if f NIL-PRF-383LLC 9999906 2066982 450 MIL PW 383 11 (USAF) 3.2.4.3.4 Electrical power svstems. A discussion of the electrical power systems shall include nor

35、mal, standby, emergency, Uninterruptible Power Supply (UPS) and interruptible power sources, with a description of distribution components, switch gear and power generating equipment. 3.2.4.3.5 Environmental control systems. A description of the environmental control system for both the launch contr

36、ol center and the launch emplacement area shall be included. The description shall also include a general description of heating and ventilating equipment and associated maintenance support equipment including a description of equipment interface with launch, alarm and detector equipment. If MCCM Op

37、erations require use of WIE, it, too, will be included in these paragraphs. 3.2.4.3.6 Auxiliaw equipment. General principles of operation shall be provided for equipment that requires operator knowledge such as fire detection, vapor sensing, security detection, and radiation monitoring. 3.2.4.4 Chap

38、ter 2, Weapon System Operating Functions. This chapter will emphasize the process required to bring the system to alert, status monitoring, alarm response, preparation for launch, and post launch activity. This chapter shall contain a functional explanation of the normal, emergency, and malfunction

39、procedures contained in other chapters of the manual. Flow diagrams shall be presented to support text when it is determined necessary by the contractor. The functional description shall include the following, as applicable. a. When the procedure will be accomplished; for example, when directed by m

40、aintenance control. b. Where the procedure will be accomplished; for example, rack, console, or other location. c. The time usually required for the system to complete a function. d. What is accomplished by the procedure. e. Procedure peculiarities, if any. f. When it is possible to accomplish the p

41、rocedure (peacetime and tactical conditions). g. Identification of the crew interface and actions required to operate the function. 3.2.4.5 Chapter 3, Normal Operating. Procedures. This chapter shall contain detailed information required by the missile combat crew in the performance of normal operat

42、ional duties during alert, countdown, and launch, and return to alert. It shall include briefings and procedures to be conducted during normal alert, tactical launch, training operations, peacetime launches, launch verification and such other operations as may be applicable or specifically required

43、by the acquiring activity. The procedures shall identi requirements from the point of crew arrival on- 7 Licensed by Information Handling ServiceslIL-PRF-383LLC 9999906 2066983 397 H MIL PRF 383 i 1 (USAF) site during daily or recurring tasks, and until crew departure following completion of the ale

44、rt tour. Operational procedures shall define individual and crew responsibilities and provide amplified procedures sufficient to ensure complete, accurate, and timely accomplishment of these functions. Simple procedures, such as complex entry and exit, shall be contained in this chapter. Complex or

45、lengthy procedures shall be explained in this chapter in amplified procedures format. The contents of this chapter shall include those crew briefings and procedures required to determine system status, maintain alert, execute emergency war orders, conduct post-launch operations and ensure secure pea

46、cetime operations. Refer to paragraph 3.4 for types of operating checklists. Operational briefings and procedures shall include, but are not restricted to, the following as appropriate for the specific weapon system: a. Operating Practices. b. Complex or Launch Control Facilities Entry and Exit Proc

47、edures. c. Changeover Procedures. d. Status and Fault Monitoring. e. Activity Coordination Procedures. f. Safety Procedures. g. Complex Status VerificatiodLaunch Control Facility Inspections and System Test Procedures. h. Communications Equipment Procedures. i. Alert Monitoring. j. Retargeting, Prep

48、aratory Launch and Launch Procedures. k. Post-Launch Shutdown Procedures. 3.2.4.5.1 Crew Procedures. Insofar as possible, crew procedures common to all weapon systems; Le., complex entry and exit, crew changeover briefings, activity coordination briefing, etc., should be identified by common titles.

49、 Amplified procedures should tell who, what, where, why and how. Most procedures in this chapter and in the next chapter will be in the demand response format (reference paragraph 3.4.2.5). 1 ” 8 3.2.4.5.2 CornplexLaunch control facility entrv and exit procedures. Amplified procedures shall include functions accomplished by the on-coming and duty crew necessary for personnel identification, entry/exit, weather observation (if applicable) and check of warning devices and specified equipment, as applicable to the weapon system. 8 Licensed by Information Handling ServicesflIL-PRF-383l11