AIR FORCE MIL-I-27193 B (3)-1983 INDICATOR ATTITUDE ARU-2B A《ARU-2B A型飞行姿态指示器》.pdf

《AIR FORCE MIL-I-27193 B (3)-1983 INDICATOR ATTITUDE ARU-2B A《ARU-2B A型飞行姿态指示器》.pdf》由会员分享，可在线阅读，更多相关《AIR FORCE MIL-I-27193 B (3)-1983 INDICATOR ATTITUDE ARU-2B A《ARU-2B A型飞行姿态指示器》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、1 MIL-1-273938 (3) bb m 777330b 03346112 LI W MIL-1-2 7193B( USAF) AMENDMENT 3 10 MARCH 83 SUPERSEDING AMENDMENT 2 07 November 1980 “Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Oklahoma City

2、 Air Logistics Center/MMEDO, Tinker AFB OK 73145 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.“ MILITARY SPEC IF ICATION INDICATOR, ATTITUDE ARU-2B/A This amendment forms a part of Military Specification M

3、IL-I-27193B (USAF), dated 8 March 1963 and is approved for use by the Agencies of the Department of Defense. PAGE 1 2.1: Under SPECIFICATIONS, Federal, Delete “QQ-P-416“ and add the following: “MMM-A-13 4 Adhesive, Epoxy Resin, Metal To Metal Structural Bonding P PP-B -6 O1 Boxes, Wood, Cleated Plyw

4、ood PPP-B-636 Box, Shipping, Fiberboard“ 2.1: Under SPECIFICATIONS, Military, Delete “JAN-F-675, MIL-S-6880, MIL-P-7936, and MIL-T-9107“ and add the following: “MIL-675 Coating Of Glass Optical Elements (Ant ire flection) DoD-D-1 O00 Drawings, Engineering And Associated List MIL-S-8802 Sealing Compo

5、und, Temperature-resistant, Integral Fuel Tanks And Fuel Cell Cavities, High-adhesion MIL-A-9067 Adhesive Banding, Process And Inspection Requirements For MIL-83 488 Coating, Aluminum, ION Vapor Deposited .“ 2.1: Under SPECIFICATIONS, Military, Delete “MIL-1-26600 and “MIL-D-70327.“ 2.1: Under STAND

6、ARDS, Military, Delete “MS 24534“ and “MS 33586“ and add the following: “MIL-STD-7 9 4 Parts And Equipment, Procedures For MIL-STD-826 Electromagnetic Interference, Test MIL-STD-83 1 Test Reports, Preparation Of Packaging And Packing Of Requirements And Test Methods : . 1 of 5 FSC 6610 O L- Licensed

7、 by Information Handling ServicesMIL-I-27193B(USAF) AMENDMENT 3 MIL-STD-8 3 8 Lubrication Of Military Equipment MIL-S TD-88 9 Di ss im ilar Metals MIL-STD-1188 Commercial Packaging Of Supplies And MS 17322 Meter, Time Totalizing, Miniature, Equipment Digital, 115 Volt AC, 400 Hz“ PAGE 3 3.3.4, line

8、4: Delete “MS 33586“ and substitute “MIL-STD-889“. PAGE 4 3.5.1: Delete “MIL-1-26600 and substitute “MIL-STD-826“. PAGE 5 3.6: Delete “MIL-D-70327“ and substitute “DoD-D-1000“. PAGE 23 3.7.8: Delete “MS 24534-3D“ and substitute “MS 17322-9“. PAGE 24 3.10.1: Delete “JAY-F-675“ and substitute “MIL-C-6

9、75“. PAGE 26 3.15: Delete “MIL-L-6880“ and substitute “MIL-STD-838“. 3.17.2: Delete entire paragraph and substitute the following: “3.17.2 Steel parts. Steel parts shall be coated with ion vapor deposited aluminum, where practicable, in accordance with MIL-C-83488, type I or II as applicable and of

10、a class that is adequate to achieve.the degree of protection required. used if demonstrated to be satisfactory and approved by the preparing activity. processes can be used.“ Other protective coating, in lieu of MIL-83488, may be Cadmium plating must be avoided when satisfactory alternative PAGE 29

11、4.4.2a: Delete “MIL-T-9107“ and substitute “MIL-STD-831“. PAGE 32 4.5.2.2.1: Delete “samping“ and substitute “sampling“. 2 Licensed by Information Handling Services, MIL-I-27193B(USAF) AMENDMENT 3 PAGE 43 4.6.34: Delete “MIL-1-26600“ and substitute “MIL-STD-826“. PAGE 47 Add the following paragraph:

12、 “4.7 Packaging inspect ion. 4.7.1 Quality conformance. The inspection of the preservation- packaging and interior package marking shall be in accordance with group A and B quality conformance inspection requirements, section 4 of MIL-P-116. The sampling and inspection of the packing and marking for

13、 shipment and storage shall be in accordance with the quality assurance provisions of applicable container specification and the marking requirements of MIL-STD-129. 4.7.2 Qualification. When the mit container is capable of serving as the shipping container, Qualification Inspection and rough handli

14、ng test as outlined in section 4 of MIL-P-116, shall be accomplished followed by a functional test of the unit to insure freedom from operational malfunction.“ Delete section 5, in its entirety and substitute the following: le 5. PACKAGING 5.1 Preservation-packaging. Preservation-packaging shall be

15、Level A or C as specified by procuring activity. 5.5.1 Level A. 5.1.1.1 Cleaning. Unit shall be cleaned in accordance with Process C-1 of MIL-P-116 5.1.1.2 Drying. immediately after cleaning, the unit shall be dried following any one or combination of the drying procedures of MIL-P-116. The drying p

16、rocedures employed shall not be injurious to the unit. 5.1.1.3 Preservation application. Not required. 5.1.1.4 Unit packaging. Unless otherwise specified by the procuring activity, each unit shall be packaged in quantity unit packs of one each in accordance with Method IC-1 of MIL-P-116. verbox each

17、 completed pack in a PPP-B-636 fiberboard, weather-resistant class box. Cushioning material between bag and container shall be of a type, dens%ty and thickness that will protect the unit from impact shock damage when tested as specified in paragraph 4.7.2 of this specification. 5.1.2 Level C. Units

18、shall be cleaned, dried, and individually packaged in a manner that will afford adequate protection against corrosion, deterioration and physical damage during shipment from supply source to the first receiving activity, in accordance with MIL-STD-1188. 3 Licensed by Information Handling Services- M

19、IL-I-27173B (3) 66 7979706 0134615 T W MIL-I -2 71 9 3B (US AF) AMENDMENT 3 5.2 Packing. Packing shall be Level A, B, or C as specified (see 6.2). 5.2.1 Level A. Units packaged as specified in 5.1 shall be packed in shipping containers conforming to specification PPP-B-636 weather resistant. Closure

20、 and reinforcing requirements shall be in accordance with the appendix of PPP-B-636. For the Army, specification PPP-B-601 plywood box, shall be used for the shipping container. 5.2.2 Level B. Units packaged as specified in 5.1 shall be packed in shipping containers conforming to specifications PPP-

21、B-636, class domestic. Closure and reinforcing requirements shall be in accordance with the appendix of PPP-B-636. specification PPP-B-636 class weather-resistant. For the Army, the shipping containers shall conform to 5.2.3 Level C. Packaged units shall be packed in shipping containers in a manner

22、that will afford adequate protection against damage during direct domestic shipment from the supply source to the first receiving activity, in accordance with MIL-STD-1188. These packs shall conform to applicable carrier rules and regulations. 5.3 Marking. In addition to any special marking required

23、 by the contract or order, each unit package and shipping container shall be marked in accordance with MIL-STD-129. The nomenclature shall be: “Indicator, Attitude, ARU-2B/A, except that shipments packaged and packed, both Level C, may be marked in accordance with MIL-STD-1188.“ PAGE 48 6.3.1: Delet

24、e “MIL-S-7502“ and “MIL-A-8623“ and substitute “MIL-A- 8 8 O2 “ and “MMM-A- 1 3 4“ res pe c t ive 1 y. 6.4: Delete the last sentence and substitute “The activity responsible for the Qualified Products List is OC-ALC/MMEDO, Tinker AFB OK 73145 and information pertaining to qualification of the produc

25、ts may be obtained from that activity . Add new paragraph: “6.5 Reclaimed materials. The use of reclaimed materials shall be encouraged to the maximum extent possible without jeopardizing the intended end use of the item.“ Delete the units designations of “cps“ for input power line frequency at the

26、locations below, and substitute “Hz“: Page 4, paragraph 3.5.k. Page 13, paragraph 3.7.2.1.2. Page 15, Table I. Page 16, paragraphs 3.7.4 and 3.7.4.1. Page 28, paragraph 4.3.2. Page 40, paragraph 4.6.29. 4 Licensed by Information Handling ServicesMIL-I-Z7193B(USAF) AMENDMENT 3 *Add new paragraph 6.6

27、as follows: “6.6 International interest. C,ertain provisions of this specification are the subject of international Standardization agreement STANAG 3637, ASCC 10/54 and ASCC 10/42. When amendment, revision or cancellation of this specification is proposed which will modify the international agreeme

28、nts concerned, the preparing activity will take appropriate action through international standardization channels including departmental standardiztion offices to change the agreement or make other appropriate accomodations.“ NOTE: where changes (additions, modifications, corrections, deletions) fro

29、m the previous amendment were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marg

30、inal notations and relationship to the last previous amendment. The margins of this amendment are marked with an asterisk to indicate Custodian: Air Force - 99 Preparing Activity : Air Force - 71 Project Number: 661 0-0008 5 *us. GOVERNMENT PRINTING OFFICE: 1S8340S-034/1623 Licensed by Information Handling Services