ABS 2 PART 5C CH 7-12-2016 RULES FOR BUILDING AND CLASSING STEEL VESSELS 2016 PART 5C SPECIFIC VESSEL TYPES (CHAPTERS 7-12) (July 2016 consolidation includes February 2016 version .pdf

《ABS 2 PART 5C CH 7-12-2016 RULES FOR BUILDING AND CLASSING STEEL VESSELS 2016 PART 5C SPECIFIC VESSEL TYPES (CHAPTERS 7-12) (July 2016 consolidation includes February 2016 version .pdf》由会员分享，可在线阅读，更多相关《ABS 2 PART 5C CH 7-12-2016 RULES FOR BUILDING AND CLASSING STEEL VESSELS 2016 PART 5C SPECIFIC VESSEL TYPES (CHAPTERS 7-12) (July 2016 consolidation includes February 2016 version .pdf（858页珍藏版）》请在麦多课文档分享上搜索。

1、 Part 5C: Specific Vessel Types (Chapters 7 - 1 2 ) RULES FOR BUILDING AND CLASSING STEEL VESSELS 2016 PART 5C SPECIFIC VESSEL TYPES (CHAPTERS 7-12) (Updated July 2016 see next page) American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2015 American Bureau of

2、Shipping. All rights reserved. ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA Updates July 2016 consolidation includes: February 2016 version plus Notice No. 1 and Corrigenda/Editorials February 2016 consolidation includes: January 2016 version plus Corrigenda/Editorials Rule Change Notice (

3、2016 ) Rule Change Notice (2016) The effective date of each technical change since 1993 is shown in parenthesis at the end of the subsection/paragraph titles within the text of each Part. Unless a particular date and month are shown, the years in parentheses refer to the following effective dates: (

4、2000) and after 1 January 2000 (and subsequent years) (1996) 9 May 1996 (1999) 12 May 1999 (1995) 15 May 1995 (1998) 13 May 1998 (1994) 9 May 1994 (1997) 19 May 1997 (1993) 11 May 1993 Listing by Effective Dates of Changes from the 2015 Rules Notice No. 2 (effective on 1 July 2015) to the 2015 Rules

5、, which is incorporated in the 2016 Rules, is summarized below. EFFECTIVE DATE 1 July 2015 shown as (1 July 2015) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks 5C-9-9/1 Amendments to SOLAS (IMO) To update the requirements in l

6、ine with SOLAS Regulations II-2/1.6.1 through to II-2/1.6.6 and their references to footnotes and with Regulation II-2/4.5.5.2.1 as amended by IMO Resolution MSC.365(93). (Incorporates Notice No. 2) 5C-9-9/1.1 Oil Fired Inert Gas Systems on Chemical Carriers To update the requirements in line with 2

7、.2.3.1.2 of the amended Chapter 15 of the FSS Code, which permits double block and bleed, not an alternative to water seal. (Incorporates Notice No. 2) 5C-9-9/1.2 Nitrogen Generator Inert Gas Systems on Chemical Carriers To clarify the requirements in line with the amendments to SOLAS Chapter II-2/R

8、egulation 4.5.5.1.2, which requires a fixed inert gas system for tankers of 8,000 tonnes deadweight and upwards. (Incorporates Notice No. 2) 5C-9-9/1.3 (New) Operational Requirements To add operational requirements in line with the new paragraphs of SOLAS Chapter II-2/Regulations 16.3.3.2 and 16.3.3

9、.3. (Incorporates Notice No. 2) EFFECTIVE DATE 1 January 2016 shown as (2016) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks 5C-8-1 General To align the Rules with the latest edition of the IGC Code. 5C-8-2 Ship Survival Capabi

10、lity and Location of Cargo Tanks To align the Rules with the latest edition of the IGC Code. 5C-8-2/7.2.1 (ABS): To provide clear guidance and figure of minimum required range of 20 in accordance with IMO MSC.1/CIRC.1461. 5C-8-3 Ship Arrangements To align the Rules with the latest edition of the IGC

11、 Code. 5C-8-4 Cargo Containment To align the Rules with the latest edition of the IGC Code. 5C-8-5 Process Pressure Vessels and Liquid, Vapour, and Pressure Piping Systems To align the Rules with the latest edition of the IGC Code. 5C-8-5/11.6.2 (ABS): To provide criteria for design calculations, ma

12、terials, dimensions and gasket data for non-standard flanges. 5C-8-5/13.1.1(a) (ABS): To provide criteria for design assessment of cryogenic valves. 5C-8-5/13.1.3(a) (ABS): To provide criteria for design assessment of cryogenic pumps. ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS .2016 iii Part/P

13、ara. No. Title/Subject Status/Remarks 5C-8-6 Materials of Construction and Quality Control To align the Rules with the latest edition of the IGC Code. 5C-8-6/Table 2 (ABS): To include the requirements of HT32 for Design Temperatures below 0C and down to 55C. 5C-8-7 Cargo Pressure/Temperature Control

14、 To align the Rules with the latest edition of the IGC Code. 5C-8-8 Vent Systems for Cargo Containment To align the Rules with the latest edition of the IGC Code. 5C-8-8/4.1.2 (ABS): To introduce the IMO FTP Code as an approval criterion for insulations and A-60 as an appropriate insulation class. 5

15、C-8-9 Cargo Containment System Atmosphere Control To align the Rules with the latest edition of the IGC Code. 5C-8-10 Electrical Installations To align the Rules with the latest edition of the IGC Code. 5C-8-10/3.3 (ABS): To align the requirements with the latest IEC requirements. 5C-8-11 Fire Prote

16、ction and Extinction To align the Rules with the latest edition of the IGC Code. 5C-8-12 Artificial Ventilation in the Cargo Area To align the Rules with the latest edition of the IGC Code. 5C-8-13 Instrumentation and Automation Systems To align the Rules with the latest edition of the IGC Code. 5C-

17、8-14 Personnel Protection To align the Rules with the latest edition of the IGC Code. 5C-8-15 Filling Limits for Cargo Tanks To align the Rules with the latest edition of the IGC Code. 5C-8-16 Use of Cargo as Fuel To align the Rules with the latest edition of the IGC Code. 5C-8-17 Special Requiremen

18、ts To align the Rules with the latest edition of the IGC Code. 5C-8-17/9 (ABS): To introduce MSC/Circ.677 as amended by MSC/Circ.1009 The rules annexed to the International Conference on Space Requirements for Special Trade Passenger Ships, 1973. The Requirements in this Chapter are applicable to ve

19、ssels of 61 m (200 ft) and over in length intended for unrestricted ocean service. Passenger vessels of lesser size will be given special consideration. 1.5 Scope This Chapter is intended to cover the additional hull construction, machinery and safety equipment requirements to class a vessel as a pa

20、ssenger vessel, not contained elsewhere in the Rules. These requirements are applicable to those features that are permanent in nature and can be verified by plan review, calculation, physical survey or any other means. This Chapter is intended for passenger vessels to be used exclusively for the tr

21、ansportation and entertainment of their passengers and, accordingly, does not address requirements associated with transportation of cargo and vehicles. This Chapter does not address the requirements from the 1974 SOLAS Convention, as amended, for operational instructions, Life-Saving Appliances and

22、 Arrangements (Chapter III), Radiotelegraphy and Radiotelephony (Chapter IV) and Safety of Navigation (Chapter V), which may be found in the Convention. 1.7 Passenger Ship Safety Certificate Where authorized by the Administration of a country signatory to the International Convention for the Safety

23、of Life at Sea, 1974, as amended, and upon request of the Owner of a classed vessel or one intended to be classed, ABS will review the plans, data, etc., and survey the vessel for compliance with the provisions of the 1974 SOLAS Convention, as amended, and issue a Passenger Ship Safety Certificate p

24、rescribed in the Convention on behalf of the Administration. ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS .2016 949 Part 5C Specific Vessel Types Chapter 7 Vessels Intended to Carry Passengers Section 1 Introduction 5C-7-1 1.9 Independent Review When the Passenger Ship Safety Certificate is issu

25、ed by an Administration or its agent other than ABS, ABS when requested, will conduct an independent review of any of the following: Subdivision and Stability Damage Control Plan Trim and Stability Booklet Life-Saving Appliances and Arrangements Inclining Experiment Safety of Navigation Structural F

26、ire Protection Fire Control Plan Fees for such independent reviews will be charged to the owner when the review is requested. 1.11 Administration Approval In general, the approval of material, safety equipment, lifesaving appliances, etc., is a function of the Administration. When the Administration

27、 or its agent, other than ABS, issues a Passenger Ship Safety Certificate to the vessel, such certificate will be accepted as evidence that the Administration has approved the material, safety equipment, life-saving appliances, etc. With other passenger vessels, the designer or builder will submit e

28、vidence that the Administration has approved the material, safety equipment, lifesaving, etc., for ABSs acceptance on vessels building to class. When given specific instructions from the Administration, ABS may approve and accept the material, equipment, life-saving appliances, etc., fitted on the v

29、essel. 3 Definitions 3.1 General For definitions of terms used in this Chapter and not shown below, reference is to be made to the definitions in Chapters II-1 and II-2 of the International Convention for the Safety of Life at Sea, 1974, as amended. (abbreviated: 1974 SOLAS Convention, as amended).

30、3.3 “A” Class Division “A” class divisions are those divisions formed by bulkheads and decks which are constructed of steel or other equivalent material, are suitably stiffened, are so constructed as to be capable of preventing the passage of smoke and flame to the end of the one-hour standard fire

31、test prescribed in II-2/3.2 of the 1974 SOLAS Convention, as amended, and are insulated with approved non-combustible materials so that the average temperature rise of the unexposed side or any one point, including any joint, does not exceed the temperature limits prescribed in II-2/3.3 of the Conve

32、ntion. 3.5 Accommodation Spaces Accommodation Spaces are those spaces used for public spaces, corridors, lavatories, cabins, offices, hospitals, cinemas, games and hobbies rooms, barber shops, pantries containing no cooking appliances and similar spaces. 3.7 Administration Administration means the G

33、overnment of the State whose flag the vessel is entitled to fly. 3.9 “B” Class Division “B” class divisions are those divisions formed by bulkheads, decks, ceilings or linings which are so constructed as to be capable of preventing the passage of flame to the end of the first half hour of the standa

34、rd fire test, have an insulation value such that the average temperature of the unexposed side or any one point, including any joint, does not rise more than the limits prescribed in II-2/3.4 of the 1974 SOLAS Convention, as amended, are constructed of approved non-combustible materials and all mate

35、rials entering into the construction and erection of “B” class divisions are non-combustible, with the exception that combustible veneers may be permitted if other applicable requirements of Section 5C-7-4 are met. 950 ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS .2016 Part 5C Specific Vessel Ty

36、pes Chapter 7 Vessels Intended to Carry Passengers Section 1 Introduction 5C-7-1 3.11 Breadth Breadth, in general, is the greatest molded width of the vessel in meters (feet). For the application of Section 5C-7-3, breadth is defined as the greatest molded width of the vessel at or below the deepest

37、 subdivision load line. 3.13 Bulkhead Deck The Bulkhead Deck is the highest deck to which the watertight bulkheads extend and are made effective. 3.15 “C” Class Division “C” class divisions are divisions constructed with approved non-combustible materials. These are no requirements pertaining to the

38、 passage of smoke or flame or to temperature rise. Combustible veneers are permitted provided the other applicable requirements of Section 5C-7-4 are met. 3.17 Deepest Subdivision Load Line Deepest Subdivision Load Line is the waterline that corresponds to the greatest draft permitted by the subdivi

39、sion requirements that are applicable. 3.19 Draft Draft, in general, is the distance in meters (feet) from the molded base line to the deepest subdivision load line. Draft for the application of Section 5C-7-3 is defined as the vertical distance from the molded base line amidships to the subdivision

40、 load line in question. 3.21 Effective Superstructures and Deckhouses An effective superstructure or effective deckhouse is one that exceeds 0.14L in length and lies within 0.5L amidships. 3.23 Fire Test Procedures Code (1 July 2014) Fire Test Procedures Code is the International Code for Applicatio

41、n of Fire Test Procedures, as adopted by IMO Resolution MSC.307(88), as may be amended by IMO. 3.25 Length Length, in general, is defined in 3-1-1/3 of the Rules. For the application of Section 5C-7-3, Length is defined as the measured distance in meters (feet) between perpendiculars taken at the ex

42、tremities of the deepest subdivision load line. 3.27 Machinery Spaces Machinery Spaces are all machinery spaces of category A and all other spaces containing propulsion machinery, boilers, oil fuel units, steam and internal combustion engines, generators and major electrical machinery, oil filling s

43、tations, refrigerating, stabilizing, ventilation and air-conditioning machinery, and similar spaces, and trunks to such spaces. 3.29 Machinery Spaces of Category A Machinery Spaces of Category A are those spaces and trunks to such spaces which contain internal combustion machinery used for main prop

44、ulsion, or internal combustion machinery used for purposes other than main propulsion where such machinery has in the aggregate a total power output of not less than 375 kW (500 hp), or any oil-fired boiler or oil fuel unit. 3.31 Margin Line The Margin Line is a line drawn at least 76 mm (3 in.) bel

45、ow the upper surface of the bulkhead deck at side. 3.33 Passenger A Passenger is every person other than the master and the members of the crew or other persons employed or engaged in any capacity on board a vessel on the business of that vessel and children under one year of age. ABSRULES FOR BUILD

46、ING AND CLASSING STEEL VESSELS .2016 951 Part 5C Specific Vessel Types Chapter 7 Vessels Intended to Carry Passengers Section 1 Introduction 5C-7-1 3.35 Passenger Spaces Passenger Spaces are those spaces provided for the accommodation and the use of passengers, excluding baggage, store, provision an

47、d mail rooms. For the purposes of Regulations II-1/6, II-1/7, II-1/7-1, II-1/7-2, and II-1/7-3, spaces provided below the margin line for the accommodation and the use of the crew shall be regarded as passenger spaces. 3.37 Public Spaces Public Spaces are those portions of the accommodation used for

48、 halls, dining rooms, lounges and similar permanently enclosed spaces. 3.39 Regulations Regulations means the regulations contained in the International Convention for the Safety of Life at Sea, 1974, as amended. The abbreviated notation form is used (e.g., “Regulation II-2/4.5.5.2” means “Regulatio

49、n 4.5.5.2 of Chapter II-2”). 3.41 Service Spaces Service Spaces are those spaces used for galleys, pantries containing cooking appliances, lockers, mail and specie rooms, store-rooms, workshops other than those forming part of the machinery spaces, and similar spaces and trunks to such spaces. 3.43 Short International Voyage Short International Voyage is an international voyage in the course of which the vessel is not more than 200 nautical miles from a port or place in which the passengers and crew could be disembarked in safety. Neither the distance between the final port