IEC 60404-1-2016 Magnetic materials - Part 1 Classification《磁性材料 第1部分 分类》.pdf

《IEC 60404-1-2016 Magnetic materials - Part 1 Classification《磁性材料 第1部分 分类》.pdf》由会员分享，可在线阅读，更多相关《IEC 60404-1-2016 Magnetic materials - Part 1 Classification《磁性材料 第1部分 分类》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60404-1 Edition 3.0 2016-10 INTERNATIONAL STANDARD Magnetic materials Part 1: Classification IEC 60404-1:2016-10(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or

2、utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining addi

3、tional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The Internationa

4、l Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make s

5、ure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and ot

6、her documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdraw

7、n publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electroni

8、c and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English

9、and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or n

10、eed further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60404-1 Edition 3.0 2016-10 INTERNATIONAL STANDARD Magnetic materials Part 1: Classification INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.030 ISBN 978-2-8322-3671-0 Registered trademark of the International Electr

11、otechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 60404-1:2016 IEC 2016 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Magnetically soft materials (coercivity 1 kA/m) . 8 4.1 Class A Irons . 8 4.1.1

12、 Reference documents 8 4.1.2 Chemical composition 8 4.1.3 Basis of subclassification . 8 4.1.4 Available forms 8 4.1.5 Physical characteristics . 8 4.1.6 Main applications . 8 4.2 Class B Low carbon mild steels 9 4.2.1 Class B1 Bulk material 9 4.2.2 Class B2 Flat material. 9 4.3 Class C Silicon stee

13、ls 10 4.3.1 Class C1 Bulk material . 10 4.3.2 Class C2 Flat material 11 4.4 Class D Other steels 16 4.4.1 Class D1 Bulk material . 16 4.4.2 Class D2 Flat material 18 4.4.3 Class D3 Stainless steels . 18 4.5 Class E Nickel-iron alloys 19 4.5.1 Class E1 Nickel content 70 % to 85 % 19 4.5.2 Class E2 Ni

14、ckel content 54 % to 68 % 20 4.5.3 Class E3 Nickel content 40 % to 51 % 21 4.5.4 Class E4 Nickel content 35 % to 40 % 22 4.5.5 Class E5 Nickel content 29 % to 33 % 23 4.6 Class F Iron-cobalt alloys . 24 4.6.1 Class F1 Cobalt content 47 % to 50 % 24 4.6.2 Class F2 Cobalt content 35 % . 24 4.6.3 Class

15、 F3 Cobalt content 23 % to 30 % 25 4.7 Class G Other alloys 26 4.7.1 Class G1 Aluminium-iron alloys 26 4.7.2 Class G2 Aluminium-silicon-iron alloys . 27 4.8 Class H Magnetically soft materials made by powder metallurgical techniques 27 4.8.1 Class H1 Soft ferrites 27 4.8.2 Class H2 Magnetically soft

16、 sintered materials . 29 4.8.3 Class H3 Powder composites . 29 4.9 Class I Amorphous soft magnetic materials 30 4.9.1 General . 30 4.9.2 Class I1 Iron-based amorphous alloys 30 4.9.3 Class I2 Cobalt-based amorphous alloys 31 4.9.4 Class I3 Nickel-based amorphous alloys . 32 4.10 Class J Nano-crystal

17、line soft magnetic materials 33 IEC 60404-1:2016 IEC 2016 3 4.10.1 Reference document 33 4.10.2 Production process 33 4.10.3 Chemical composition 33 4.10.4 Basis of subclassification . 33 4.10.5 Available forms 33 4.10.6 Physical characteristics . 33 4.10.7 Main applications . 34 5 Magnetically hard

18、 materials (coercivity 1 kA/m) 34 5.1 Class Q Magnetostrictive alloys Rare earth iron alloys (Class Q1) 34 5.1.1 Reference document 34 5.1.2 Chemical composition 34 5.1.3 Basis of subclassification . 34 5.1.4 Available forms 34 5.1.5 Physical characteristics . 34 5.1.6 Main applications . 35 5.2 Cla

19、ss R Magnetically hard alloys 35 5.2.1 Class R1 Aluminium-nickel-cobalt-iron-titanium (AlNiCo) alloys 35 5.2.2 Class R3 Iron-cobalt-vanadium-chromium (FeCoVCr) alloys . 36 5.2.3 Class R5 Rare earth cobalt (RECo) alloys 36 5.2.4 Class R6 Chromium-iron-cobalt (CrFeCo) alloys . 37 5.2.5 Class R7 Rare e

20、arth-iron-boron (REFeB) alloys 38 5.3 Class S Magnetically hard ceramics Hard ferrites (Class S1) 39 5.3.1 Reference document 39 5.3.2 Chemical composition and manufacturing method . 39 5.3.3 Basis of subclassification . 39 5.3.4 Available forms 39 5.3.5 Physical characteristics . 40 5.3.6 Main appl

21、ications . 40 5.4 Class T Other magnetically hard materials Martensitic steels (Class T1) . 40 5.4.1 Reference document 40 5.4.2 Composition 40 5.4.3 Basis of subclassification . 40 5.4.4 Available forms 40 5.4.5 Physical characteristics . 40 5.4.6 Main applications . 41 5.5 Class U Bonded magnetica

22、lly hard materials 41 5.5.1 General . 41 5.5.2 Class U1 Bonded aluminium-nickel-cobalt-iron-titanium (AlNiCo) magnets 41 5.5.3 Class U2 Bonded rare earth-cobalt (RECo) magnets 42 5.5.4 Class U3 Bonded neodymium-iron-boron (REFeB) magnets . 42 5.5.5 Class U4 Bonded hard ferrite magnets 43 5.5.6 Class

23、 U5 Bonded rare earth-iron-nitrogen magnets . 44 4 IEC 60404-1:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MAGNETIC MATERIALS Part 1: Classification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national e

24、lectrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spec

25、ifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Interna

26、tional, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The form

27、al decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations fo

28、r international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4

29、) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shal

30、l be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certif

31、ication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal inju

32、ry, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references c

33、ited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identif

34、ying any or all such patent rights. International Standard IEC 60404-1 has been prepared by IEC technical committee 68: Magnetic alloys and steels. This third edition cancels and replaces the second edition published in 2000 and constitutes a technical revision. This edition includes the following s

35、ignificant technical changes with respect to the previous edition: a) Removal of all tables and values describing typical properties of the material to be consistent with the aim of the document to be a classification and not a specification. b) Enlargement of the Ni content for the classes E1 and E

36、3. c) Enlargement of the Co content for the classes F3. d) Addition of a new class: U5 bonded rare earth-iron-nitrogen magnets. IEC 60404-1:2016 IEC 2016 5 The text of this standard is based on the following documents: CDV Report on voting 68/533/CDV 68/555/RVC Full information on the voting for the

37、 approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60404 series, published under the general title Magnetic materials, can be foun

38、d on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replac

39、ed by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 6 IEC 60404-1:2016 IEC 2016 MAGNETIC MATERIALS Part 1: Classification 1 Scope This part of IEC 60404 is intended to classify commercially available magnetic materials. The term “magnetic mater

40、ials“ denotes substances where the application requires the existence of ferromagnetic or ferrimagnetic properties. In this document, the classification of magnetic materials is based upon the generally recognized existence of two main groups of products: soft magnetic materials (coercivity 1 000 A/

41、m); hard magnetic materials (coercivity 1 000 A/m). Within these main groups, the classification when appropriate recognizes the following characteristics: the main alloying element and the metallurgical state and physical properties of the material; when possible and convenient, the relationship be

42、tween these characteristics is identified. A classification by specific areas of application cannot be applied to all materials because different materials can very often be used for the same application depending on the characteristics required. 2 Normative references The following documents are re

43、ferred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-121, Internationa

44、l Electrotechnical Vocabulary Part 121: Electromagnetism IEC 60050-151, International Electrotechnical Vocabulary Part 151: Electrical and magnetic devices IEC 60050-221, International Electrotechnical Vocabulary Chapter 221: Magnetic materials and components IEC 60401-3, Terms and nomenclature for

45、cores made of magnetically soft ferrites Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores IEC 60404-2, Magnetic materials Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epste

46、in frame IEC 60404-3, Magnetic materials Part 3: Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester IEC 60404-1:2016 IEC 2016 7 IEC 60404-4, Magnetic materials Part 4: Methods of measurement of d.c. magnetic properties of iron and steel IE

47、C 60404-6, Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens IEC 60404-7, Magnetic materials Part 7: Method of measurement of the coercivity of magn

48、etic materials in an open magnetic circuit IEC 60404-8-1, Magnetic materials Part 8-1: Specifications for individual materials Magnetically hard materials IEC 60404-8-3, Magnetic materials Part 8-3: Specifications for individual materials Cold- rolled electrical non-alloyed and alloyed steel sheet a

49、nd strip delivered in the semi-processed state IEC 60404-8-4, Magnetic materials Part 8-4: Specifications for individual materials Cold- rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state IEC 60404-8-5, Magnetic materials Part 8: Specifications for individual materials Section Five: Specification for steel sheet and strip with specif