IEC 60311-2016 Electric irons for household or similar use - Methods for measuring performance《家用或类似用途的电熨斗.性能测量方法》.pdf

《IEC 60311-2016 Electric irons for household or similar use - Methods for measuring performance《家用或类似用途的电熨斗.性能测量方法》.pdf》由会员分享，可在线阅读，更多相关《IEC 60311-2016 Electric irons for household or similar use - Methods for measuring performance《家用或类似用途的电熨斗.性能测量方法》.pdf（114页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60311 Edition 5.0 2016-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric irons for household or similar use Methods for measuring performance Fers repasser lectriques pour usage domestique ou analogue Mthodes de mesure de laptitude la fonction IEC 60311:2016-12(en-fr) colour inside THIS P

2、UBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writ

3、ing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further info

4、rmation. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit nationa

5、l de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3

6、, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies.

7、About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting t

8、he entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety

9、of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available onli

10、ne and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechn

11、ical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 an

12、d CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mond

13、iale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corri

14、gendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, table

15、ttes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. I

16、EC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectr

17、oniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectro

18、techniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires

19、 sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60311 Edition 5.0 2016-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric irons for household or similar use Methods for measuring performance Fers repasser lectriques pour usage domestique ou analogue Mthodes d

20、e mesure de laptitude la fonction INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 97.060 ISBN 978-2-8322-3706-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make s

21、ure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 60311:2016 IEC 2016 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 Measure

22、ments for various types of irons 10 5 General conditions for measurements 12 5.1 General . 12 5.2 Ambient conditions . 12 5.3 Voltage and frequency for measurements . 12 5.4 Steady conditions . 12 5.5 Iron support for measurements . 13 5.6 Temperature measurement . 13 5.7 Cordless irons having a mai

23、ns supply attachment . 13 5.8 Irons fitted with separate steam generator/boiler . 13 5.9 Irons fitted with auto switch-off devices . 13 5.10 Test sample 13 5.11 Irons with additives . 13 5.12 Circumvention . 13 6 General requirements 14 6.1 Determination of mass 14 6.2 Measurement of length of the s

24、upply cord . 14 7 Temperature measurements 14 7.1 Measurement of heating-up time . 14 7.2 Measurement of initial overswing temperature and heating-up excess temperature 14 7.3 Measurement of sole-plate temperature 15 7.4 Determination of the hottest point . 15 7.5 Measurement of temperature distribu

25、tion 16 7.6 Measurement of cyclic fluctuation of temperature of the hottest point 16 8 Assessment of the spray function 16 8.1 Determination of the mass of spray . 16 8.1.1 Determination of the mass of spray for irons with manual spray pumps . 16 8.1.2 Determination of the mass of spray for irons wi

26、th means for continuous spray . 17 8.2 Determination of the spray pattern 17 9 Measurements concerning steaming operation 18 9.1 Measurement of heating-up time for steaming operation . 18 9.1.1 For vented steam irons 18 9.1.2 For pressurized steam irons or instantaneous steam irons . 19 9.2 Measurem

27、ent of steaming time, steaming rate and water leakage rate 19 9.2.1 For vented steam irons 19 9.2.2 For pressurized steam irons and instantaneous steam irons 20 9.2.3 Tolerances and control procedures for the steaming rate . 21 9.3 Determination of mass of a shot of steam . 22 10 Assessment of smoot

28、hing 23 10.1 General . 23 IEC 60311:2016 IEC 2016 3 10.2 Creasing of test cloth 23 10.2.1 Test cloth 23 10.2.2 Conditioning of test cloth before creasing 23 10.2.3 Creasing tool . 23 10.2.4 Wrapping and creasing of test cloth . 23 10.3 Conditioning of the iron . 24 10.4 Ironing 24 10.5 Ironing with

29、shot of steam . 24 10.6 Evaluation . 25 11 Measurement of input power and energy consumption . 25 11.1 Measurement of input power . 25 11.2 Measurement of energy consumption 25 11.2.1 Preparation of the test cloth . 25 11.2.2 Measurement of the energy consumed during heating-up operation . 26 11.2.3

30、 Measuring of energy consumed during an ironing operation 26 11.3 Ironing efficiency. 27 12 Assessment of sole-plate . 27 12.1 Determination of smoothness of the sole-plate 27 12.2 Measurement of scratch resistance of sole-plate . 28 12.2.1 General . 28 12.2.2 Test procedure 28 12.2.3 Evaluation of

31、results 29 12.3 Determination of adhesion of polytetrafluorethylene (PTFE) coating or similar coating on sole-plate . 29 13 Measurement of thermostatic stability 30 13.1 Heating test 30 13.2 Drop test . 30 13.3 Determination of drift of thermostat . 31 14 Determination of total steaming time for har

32、d water . 31 14.1 For non-pressurised steam irons . 31 14.2 For pressurised steam irons or instantaneous steam irons 32 15 Instruction for use 33 16 Information at the point of sale 33 Annex A (informative) Measurement of steaming time, steaming rate and water leakage rate for pressurized steam iron

33、s or instantaneous steam irons 47 Annex B (normative) Ironing board . 48 Annex C (normative) Cotton cloth 51 Annex D (informative) Classification of electric irons 52 D.1 Classification according to temperature control . 52 D.2 Classification according to the existence or non-existence of steam- pro

34、ducing ability 52 D.3 Classification of steam irons according to steam control . 52 D.4 Classification according to existence or non-existence of spraying ability . 52 D.5 Classification according to nature of power supply 52 D.6 Classification according to voltage 52 D.7 Classification according to

35、 usage 52 D.8 Designation of irons 53 Bibliography 54 4 IEC 60311:2016 IEC 2016 Figure 1 Arrangement for measuring the sole-plate temperature 34 Figure 2 Variation of sole-plate temperature after switching-on 35 Figure 3 Determination of spray pattern . 36 Figure 4 Test apparatus . 37 Figure 5 Creas

36、ing tool 38 Figure 6 Wrapping rod and pencil 38 Figure 7 Circular and rectangular blocks 39 Figure 8 Conditioning of the iron 39 Figure 9 Ironing . 39 Figure 10 Evaluation 40 Figure 11 Comparison charts . 42 Figure 12 Test apparatus for smoothness of sole-plate 43 Figure 13 Scratch 44 Figure 14 Posi

37、tions of cutting area . 45 Figure 15 Apparatus for drop test . 45 Figure 16 Test apparatus for total steaming time . 46 Figure A.1 Measurements concerning steaming operation 47 Figure B.1 Example of construction of the ironing board 50 Table 1 Measurements of various types of irons 11 Table 2 Classe

38、s of scratch resistance 29 IEC 60311:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC IRONS FOR HOUSEHOLD OR SIMILAR USE METHODS FOR MEASURING PERFORMANCE FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising al

39、l national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Te

40、chnical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory w

41、ork. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

42、 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recomm

43、endations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any

44、 end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publ

45、ication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by indepe

46、ndent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any p

47、ersonal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative

48、references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible

49、 for identifying any or all such patent rights. International Standard IEC 60311 has been prepared by subcommittee 59L: Small household appliance, of IEC technical committee 59: Performance of household and similar electrical appliances. This fifth edition cancels and replaces the fourth edition published in 2002, Amendment 1:2005 and Amendment 2:2009. This edition constitutes a technical revision. This edit