IEC 60092-306-2009 Electrical installations in ships - Part 306 Equipment - Luminaires and lighting accessories《船舶电气设备.第306部分 设备.灯具及照明配件》.pdf

《IEC 60092-306-2009 Electrical installations in ships - Part 306 Equipment - Luminaires and lighting accessories《船舶电气设备.第306部分 设备.灯具及照明配件》.pdf》由会员分享，可在线阅读，更多相关《IEC 60092-306-2009 Electrical installations in ships - Part 306 Equipment - Luminaires and lighting accessories《船舶电气设备.第306部分 设备.灯具及照明配件》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60092-306 Edition 4.0 2009-11 INTERNATIONAL STANDARD Electrical installations in ships Part 306: Equipment Luminaires and lighting accessories IEC 60092-306:2009(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, n

2、o part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC c

3、opyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC

4、 The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the I

5、EC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives in

6、formation on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The

7、worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore

8、/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60092-306 Edition 4.0 2009-11 INTERNATIONAL STANDARD Electrical installations i

9、n ships Part 306: Equipment Luminaires and lighting accessories INTERNATIONAL ELECTROTECHNICAL COMMISSION R ICS 47.020.60 PRICE CODE ISBN 2-8318-1070-4 Registered trademark of the International Electrotechnical Commission 2 60092-306 IEC:2009(E) CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normati

10、ve references .7 3 Terms and definitions .9 4 Requirements on luminaires .9 4.1 General .9 4.2 Mechanical requirements.9 4.2.1 Design.9 4.2.2 Materials .10 4.3 Electrical requirements10 4.3.1 Electrical safety.10 4.3.2 Luminaires for use on IT power distribution systems10 4.3.3 Electromagnetic compa

11、tibility 10 4.4 Illumination technology10 4.5 Environmental conditions 11 4.6 Special requirements on discharge lamp luminaires 11 4.7 Component parts.11 4.8 Lampholders .11 4.9 Marking .12 5 Requirements on lighting accessories.13 5.1 General .13 5.2 Enclosures 13 5.3 Ceiling roses .13 6 Requiremen

12、ts on socket-outlets and plugs for luminaires connection13 7 Tests14 7.1 General .14 7.2 Environmental tests.14 7.2.1 Vibration exposure 14 7.2.2 Shock exposure.14 7.2.3 Climatic exposure15 7.2.4 Storage during climatic exposure.15 7.2.5 Special chemical and physical attributes16 7.3 Electrical test

13、s.16 7.3.1 High voltage test .16 7.3.2 Insulation resistance17 7.4 Coating thickness17 8 Packaging and marking 17 Bibliography18 Table 1 Special requirements on component parts.11 Table 2 Standard types of lampholders 12 Table 3 Vibration exposure 14 Table 4 Shock exposure 15 Table 5 Climatic condit

14、ions, operation15 60092-306 IEC:2009(E) 3 Table 6 Exposure to climatic conditions, storage16 Table 7 Special chemical and physical attributes of non-metallic materials 16 Table 8 High voltage test .17 Table 9 Insulation resistance .17 4 60092-306 IEC:2009(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION

15、 _ ELECTRICAL INSTALLATIONS IN SHIPS Part 306: Equipment Luminaires and lighting accessories FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IE

16、C is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)

17、 and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with

18、 the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nea

19、rly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in tha

20、t sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committee

21、s undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide a

22、ny attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest e

23、dition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether

24、direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indisp

25、ensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60092-3

26、06 has been prepared by IEC technical committee 18: Electrical installations of ships and of mobile and fixed offshore units. This fourth edition cancels and replaces the third edition published in 1980. This edition constitutes a technical revision. This edition includes the following significant t

27、echnical changes with respect to the previous edition. a) Title has been amended; b) Scope has been stated more precisely; c) Requirements on mechanical design and materials have been amended and stated more precisely; d) Table 2 Standard types of lampholders, has been amended; e) Environmental test

28、s, especially regarding shock and vibration have been added; 60092-306 IEC:2009(E) 5 f) Requirements and tests concerning special chemical and physical attributes have been added; g) Standard has been editorially revised. The text of this standard is based on the following documents: FDIS Report on

29、voting 18/1137/FDIS 18/1143/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60092 series, publis

30、hed under the general title Electrical installations in ships, can be found on the IEC web site. The committee has decided that the contents of this publication will remain unchanged until the maintenance date indicated on the IEC web site under “http:/webstore.iec.ch” in the data related to the spe

31、cific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 6 60092-306 IEC:2009(E) INTRODUCTION IEC 60092 forms a series of international standards for electrical i

32、nstallations in sea-going ships, incorporating good practice and coordinating, as far as possible, existing rules. These standards form a code of practical interpretation and amplification of the requirements of the International Convention for the Safety of Life at Sea, a guide for future regulatio

33、ns which may be prepared and a statement of practice for use by shipowners, shipbuilders and appropriate organizations. 60092-306 IEC:2009(E) 7 ELECTRICAL INSTALLATIONS IN SHIPS Part 306: Equipment Luminaires and lighting accessories 1 Scope This International Standard applies to luminaires and ligh

34、ting accessories for use in ships. It applies primarily to luminaires for illumination purposes. NOTE Boats, submarines (except naval submarines), watercraft and floating equipment are ships to which this standard applies. This standard also applies to lighting accessories associated with the wiring

35、 and current consuming appliance of an installation. This standard does not apply to portable luminaires, navigation lights, search lights, daylight signalling lamps, signal lights including the relevant control and monitoring equipment and other lights used for navigation in channels, harbours, etc

36、. For navigation lights, see EN 14744, for search lights, see ISO 17884, for daylight signalling lamps, see ISO 25861. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated r

37、eferences, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-1, Environmental testing Part 2-1: Tests Test A: Cold IEC 60068-2-2, Environmental testing Part 2-2: Tests Test B: Dry heat IEC 60068-2-6, Environmental testing Part 2-6: Tests Test Fc: Vibration

38、 (sinusoidal) IEC 60068-2-27, Environmental testing Part 2-27: Tests Test Ea and guidance: Shock IEC 60068-2-52, Environmental testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium, chloride solution) IEC 60068-2-78, Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state IEC

39、60079 (all parts), Equipment for explosive atmospheres IEC 60092-101, Electrical installations in ships Part 101: Definitions and general requirements IEC 60092-201:1994, Electrical installations in ships Part 201: System design General IEC 60092-352, Electrical installations in ships Part 352: Choi

40、ce and installation of electrical cables IEC 60155, Glow-starters for fluorescent lamps IEC 60238, Edison screw lampholders 8 60092-306 IEC:2009(E) IEC 60332-1-2:2004, Tests on electric and optical fibre cables under fire conditions Part 1- 2: Test for vertical flame propagation for a single insulat

41、ed wire or cable Procedure for 1 kW pre-mixed flame IEC 60400, Lampholders for tubular fluorescent lamps and starterholders IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60533, Electrical and electronic installations in ships Electromagnetic compatibility IEC 60598-1, Luminai

42、res Part 1: General requirements and tests IEC 60684-2, Flexible insulating sleeving Part 2: Methods of test IEC/TR 60721-4-6, Classification of environmental conditions Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental t

43、ests of IEC 60068 Ship environment IEC 60695-2-11, Fire hazard testing Part 2-11: Glowing/hot-wire based test methods Glow-wire flammability test method for end-products IEC 60754-1, Test on gases evolved during combustion of materials from cables Part 1: Determination of the amount of halogen acid

44、gas IEC 60838-1, Miscellaneous lampholders Part 1: General requirements and tests IEC 60945, Maritime navigation and radiocommunication equipment and systems General requirements Methods of testing and required test results IEC 61184, Bayonet lampholders IEC 61347-2-1, Lamp controlgear Part 2-1: Par

45、ticular requirements for starting devices (other than glow starters) IEC 61995-1, Devices for the connection of luminaires for household and similar purposes Part 1: General requirements IEC 61995-2, Devices for the connection of luminaires for household and similar purposes Part 2: Standard sheets

46、for DCL ISO 2409, Paints and varnishes Cross-cut test ISO 3882, Metallic and other inorganic coatings Review of methods of measurement of thickness ISO 4892-2, Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps ISO 4892-3, Plastics Methods of exposure to laboratory ligh

47、t sources Part 3: Fluorescent UV lamps ISO 9001, Quality management systems Requirements ISO 17884, Ships and marine technology Searchlights for high-speed craft ISO 25861 Ships and marine technology Navigation Daylight signalling lamps Defence Standard 02-713, Determination of the Toxicity Index of

48、 the Products of Combustion from Small Specimens of Materials EN 12206-1, Paints and varnishes Coating of aluminium and aluminium alloys for architectural purposes Part 1: Coatings prepared from coating powder EN 13032-1, Light and lighting Measurement and presentation of photometric data of lamps a

49、nd luminaires Part 1: Measurement and file format 60092-306 IEC:2009(E) 9 EN 13438, Paints and varnishes Powder organic coatings for galvanized or sherardised steel products for construction purposes EN 14744, Inland navigation vessels and sea-going vessels Navigation light IEC 62444, Cable glands for electrical installations 13 Terms and definitions For the purposes of th