UL 1384-2017 UL Standard for Safety Water-Based Automatic Extinguisher Units (First Edition).pdf

《UL 1384-2017 UL Standard for Safety Water-Based Automatic Extinguisher Units (First Edition).pdf》由会员分享，可在线阅读，更多相关《UL 1384-2017 UL Standard for Safety Water-Based Automatic Extinguisher Units (First Edition).pdf（59页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ANSI/CAN/UL/ULC 1384:2017, Water-Based Automatic Extinguisher Units STANDARD FOR SAFETY JOINT CANADA-UNITED STATES NATIONAL STANDARD ANSI/UL 13842017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR F

2、URTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SCC FOREWORD National Standard of Canada A National Standard of Canada is a standard developed by an SCC-accredited Standards Development Organization (SDO), and approved by the Standards Council of Canada (SCC), in accordance with SCCs:

3、Requirements and Guidance-Accreditation for Standards Development Organizations, and Requirements and Guidance-Approval of National Standards of Canada Designation. More information on National Standard requirements can be found at www.scc.ca. An SCC-approved standard reects the consensus of a numbe

4、r of experts whose collective interests provide, to the greatest practicable extent, a balance of representation of affected stakeholders. National Standards of Canada are intended to make a signicant and timely contribution to the Canadian interest. SCC is a Crown corporation within the portfolio o

5、f Industry Canada. With the goal of enhancing Canadas economic competitiveness and social well-being, SCC leads and facilitates the development and use of national and international standards. SCC also coordinates Canadian participation in standards development, and identies strategies to advance Ca

6、nadian standardization efforts. Accreditation services are provided by SCC to various customers, including product certiers, testing laboratories, and standards development organizations. A list of SCC programs and accredited bodies is publicly available at www.scc.ca. Users should always obtain the

7、 latest edition of a National Standard of Canada from the standards development organization responsible for its publication, as these documents are subject to periodic review.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for S

8、afety for Water-Based Automatic Extinguisher Units, ANSI/CAN/UL/ULC 1384 First Edition, Dated May 9, 2017 Summary of Topics The First Edition of the Standard for Safety for Water-Based Automatic Extinguisher Units, ANSI/CAN/UL/ULC 1384, has been issued to reect the latest ANSI and SCC approval dates

9、, and to incorporate the proposal dated September 9, 2016. The revised requirements are substantially in accordance with Proposal(s) on this subject dated September 9, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form b

10、y any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no

11、 event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised

12、of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss

13、, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. MAY 9, 2017 ANSI/CAN/UL/ULC 1384 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR

14、FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 9, 2017 ANSI/CAN/UL/ULC 1384 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 9, 2017 1 ANSI/CAN/UL/ULC 1384 Standard for Water-Based Automatic Ex

15、tinguisher Units First Edition May 9, 2017 This ANSI/CAN/UL/ULC Safety Standard consists of the First Edition. The most recent designation of ANSI/UL 1384 as an American National Standard (ANSI) occurred on May 8, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages,

16、 Title Page, Preface or SCC Foreword. This standard has been approved as a National Standard of Canada (NSC) by the Standards Council of Canada (SCC). COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 1384-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOU

17、T PERMISSION FROM UL MAY 9, 2017 ANSI/CAN/UL/ULC 1384 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface . 6 INTRODUCTION 1 Scope .9 2 Components 9 3 Units of Measurement .9 4 Undated References .10 5 Glos

18、sary 10 CONSTRUCTION 6 General .11 7 Controls and Indicators .12 8 Caps, Valves, and Closures .13 9 Pressure Vessels and Cylinders .13 10 Pressure Relief Devices for Pressure Vessels and Cylinders .17 11 Gaskets and O Rings 17 12 Pressure Gauges for Pressure Vessels and Cylinders .17 13 Puncturing M

19、echanisms .18 14 Siphon Tubes 19 15 Extinguishing Agent .19 16 Expellant Gases 19 17 Polymeric Materials and Nonmetallic Parts .19 18 Anti-Recoil Devices .20 19 Gas Cartridges .20 20 Pressure Switches 20 21 Flexible Hose Assemblies Used for Distribution of Agent 21 22 Nozzles 21 23 Protective Covers

20、 .21 24 Strainer and Filter .22 PERFORMANCE 25 General 22 26 Fire Test Total Flooding Protection 22 26.1 General .22 26.2 Class A re tests .24 26.3 Class B re tests .24 26.4 Automatic operation extinguishment tests .26 27 Locking Indicator Test .28 28 Nozzle Water Flow Test .28 29 Nozzle Function Te

21、st 29 30 Nozzle Specic Corrosion Tests 29 30.1 Sulfur dioxide/carbon dioxide corrosion .29 30.2 Hydrogen sulde corrosion 30 30.3 Salt spray corrosion 30 31 Agent Exposure Test 31 32 Flow Distribution Tests 31 33 Hydrostatic Pressure Test .32 MAY 9, 2017 ANSI/CAN/UL/ULC 1384 3UL COPYRIGHTED MATERIAL

22、NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 33.1 Pressure vessels and gas cartridges 32 33.2 Other devices subject to pressure 33 33.3 Test method .34 34 30-Day Elevated Temperature Test .34 35 Temperature Cycling Test .34 36 Salt Spray Corrosion Test .35 37 50

23、0 Cycle Operation Test 35 38 One-Year Time Leakage Test 36 39 Mounting Device Test .36 40 Flexible Hose Assembly Low Temperature Test 37 41 Flexible Hose Assembly Cycling Test .37 42 Flexible Hose Assembly Fire Exposure Test .37 43 Pneumatic Operation Test .38 44 Pressure Relief Tests .38 45 Elastom

24、eric Parts Test 39 46 10-Day Moist Ammonia Air Stress Cracking Test .39 47 Aging Tests - Plastic Materials .40 47.1 Air-oven aging test .40 47.2 Exposure to extinguishing agent test .42 47.3 Light and water test 42 48 Calibration Test - Gauges and Indicators 43 49 Burst Strength Test - Gauges and In

25、dicators .43 50 Overpressure Test - Gauges .44 51 Impulse Test - Gauges 44 52 Pressure Gauge Relief Test 44 53 Water Resistance Test - Gauges and Indicators 45 54 Nameplate Exposure Tests 45 55 Nameplate Adhesion Test .45 56 Nameplate Abrasion Test 46 MANUFACTURING AND PRODUCTION TESTS 57 General 46

26、 57.1 Manufacturers Tests .46 57.2 Hydrostatic pressure test- shells .46 57.3 Non-DOT or Transport Canada, Transportation of Dangerous Goods Regulations gas cartridges .47 57.4 Gauge calibration test 47 57.5 Leakage test .47 PACKING FOR SHIPMENT 58 General 48 MARKINGS 59 General 48 INSTALLATION INST

27、RUCTIONS 60 Installation, Operation, and Maintenance Instruction Manual .50 61 Owners Manual 52 MAY 9, 2017 ANSI/CAN/UL/ULC 1384 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ANNEX A (CAN) (normative)Markings French Translation MAY 9, 201

28、7 ANSI/CAN/UL/ULC 1384 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the First Edition of the ANSI/CAN/UL/ULC 1384, Standard for Safety for Water-Based Automatic Extinguisher Units. UL is accredited by the American Nationa

29、l Standards Institute (ANSI) and the Standards Council of Canada (SCC) as a Standards Development Organization (SDO). This ANSI/CAN/UL/ULC 1384 Standard for Safety is under continuous maintenance, whereby each revision is ANSI/CAN approved upon publication. If no revisions occur, the initiation of t

30、he review of this Standard will commence within 5 years of the date of publication. In Canada, there are two official languages, English and French. All safety warnings must be in French and English. Attention is drawn to the possibility that some Canadian authorities may require additional markings

31、 and/or installation instructions to be in both official languages. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs

32、 Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. To purchase UL Standards, visit

33、 Comm 2000 at http:/m- or call tollfree 1-888-853-3503. This Edition of the Standard has been formally approved by the UL Standards Technical Panel (STP) on Extinguishing Systems, STP 300. This list represents the STP 300 membership when the nal text in this standard was balloted. Since that time, c

34、hanges in the membership may have occurred. STP 300 Membership Name Representing Interest Category* Region Nicolette Allen Underwriters Laboratories Inc. STP Project Manager - Non- voting USA Art Black Carmel Fire Protection Associates AHJ USA Richard Bolyard NC Department of Insurance Office of Sta

35、te Fire Marshal AHJ USA Lawrence Carmen Victaulic Producer USA Tony Crimi A.C. Consulting Solutions Inc. General Ontario, Canada Bradford Cronin Newport Fire Department AHJ USA James Engman Ansul Incorporated Producer USA Robbin Foxcroft Fire Safety Services (Calgary) Ltd. Supply Chain Alberta, Cana

36、da Fred Goodnight Amerex Corporation Producer USA Diane Haithcock Underwriters Laboratories Inc. STP Chair - Non-voting USA Tom Harding Classic Fire Protection Inc. Supply Chain Ontario, Canada Frederick Jeffers Nova Scotia Office of the Fire Marshal AHJ Nova Scotia, Canada MAY 9, 2017 ANSI/CAN/UL/U

37、LC 1384 6 STP 300 Membership Continued on Next PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL STP 300 Membership (Continued) Name Representing Interest Category* Region Timothy Kelley Giles Enterprises Inc. Producer USA Chuck Kimball Br

38、ooks Equipment Company, Inc. Producer USA Bruce Levitt Levitt-Safety Ltd Supply Chain Ontario, Canada Richard Lupien Kidde-Fenwal Inc. Producer USA Norbert Makowka National Association of Fire Equipment Distributors General USA Brian McBain Underwriters Laboratories of Canada, Inc. Non-voting Ontari

39、o, Canada Romil Patel Siemens Industry Producer USA Maurice Pilette Mechanical Designs Ltd. General USA Scott Pugsley Seneca College General Ontario, Canada Mark Ramlochan Underwriters Laboratories of Canada, Inc. Non-voting Ontario, Canada Paul Rivers 3M Electronics Materials Solutions Supply Chain

40、 USA Mark Robin DuPont Chemicals or b) Is superseded by a requirement in this standard. 2.3 A component shall be used in accordance with its rating established for the intended conditions of use. 2.4 Specic components are incomplete in construction features or restricted in performance capabilities.

41、 Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied limits, and shall be used only under those specic conditions. 3 Units of Measurement 3.1 The metric unit shall be designated as the official unit for purposes of this standard. Whe

42、re values of measurement are specied in both SI and English units, either unit is used. In cases of dispute, the metric unit shall be used. MAY 9, 2017 ANSI/CAN/UL/ULC 1384 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 4 Undated Reference

43、s 4.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. 5 Glossary 5.1 For the purpose of this standard, the following denitions apply. 5.2 ACTUATOR ASSEMBLY A pressure vessel p

44、ressurized with an inert gas or a liquid and inert gas that includes a valve; or a gas cartridge pressurized with an inert gas that includes a puncture disc, which upon automatic means of actuation, releases pressure resulting in the discharge process. 5.3 AUTOMATIC EXTINGUISHER UNIT A unit that has

45、 no manual means of actuation and discharges extinguishing agent upon thermal actuation, and is intended for use in a normally unoccupied space and is limited to a single protected area. 5.4 CYLINDER/VALVE ASSEMBLY A container that incorporates a valve and that provides storage of the extinguishing

46、agent and expellant gas until the valve is actuated. For cartridge operated units, this assembly includes the dry chemical storage container and cartridge mechanism. When actuated, the valve releases the agent into the distribution network of the extinguisher unit. 5.5 DISCHARGE NOZZLE A device that

47、 is used to uniformly distribute the extinguishing agent over or into a specic area, or within a specic volume, or both. 5.6 DISCHARGE RATE The ratio of the quantity of agent discharged from a nozzle to the discharge time measured within 1 s. When a minimum discharge rate is indicated, reference is

48、made to the minimum quantity of agent discharged and the time measured within 1s . 5.7 DISCHARGE TIME The time interval between the rst appearance of extinguishing agent at the nozzle and the time at which the discharge becomes predominantly gaseous. 5.8 EXPELLANT GAS Dry nitrogen, dry air, or other

49、 gas used to facilitate the discharge of the extinguishing agent. 5.9 GAS CARTRIDGE A container that provides storage for an expellant gas. 5.10 HEPTANE A commercial grade hydrocarbon used as a test fuel with the following characteristics: Minimum Initial boiling point 88C (190F) Maximum Dry point 100C (212F) Specic gravity (15.6C/15.6C)(60F/60F) 0.69 - 0.73 5.11 METHOD OF ACTUATION, AUTOMATIC A means of actuation that results in extinguishin